Post on 15-Oct-2018
transcript
127 Living es un proyecto de vida y queremos que lo vivas con Sostenibilidad. Por eso, actualmente contamos con una pre-certificación Edge, una innovación de la Corporación Financiera Internacional (IFC), miembro del Banco Mundial, que nos permite ejercer y promover la construcción de edificios ecológicos de forma más rápida, fácil y asequible.
Este certificado es entregado a través de CAMACOL solo si accedes a instalar en tu vivienda un paquete verde que incluye griferías ahorradoras, sanitario ahorrador y bombillos ahorradores. Con esto garantizarás:
• Reducir el valor de tu servicio público de agua en un 26%. • Reducir el valor de tu servicio público de luz en un 24%. • Ser parte de tu comunidad sostenible. • Ser protagonista en el cuidado del medio ambiente. • Beneficios en tu crédito de vivienda.
A CONTINUACIÓN ENCONTRARÁS EL CERTIFICADOY LAS ESPECIFICACIONES TÉCNICAS.
Exemplifying achievement in the following areas:
24%Energy Savings
26%Water Savings
Less EmbodiedEnergy in Materials
52%
0.42 tCO₂/unit/year
0.19 tCO₂/unit/year
Operational CO₂ Emissions
Operational CO₂ Savings
THIS CERTIFIES THAT127 Living900 UnitsHAS ACHIEVED ANEDGE PRELIMINARY CERTIFICATECERTIFICATE NUMBERLP9-COL-17101710011566-900-P
DEVELOPED BYConstructora BolivarCERTIFIED BYCAMACOL
Thomas Saunders, EDGE Program DirectorDATE OF ISSUE: 16-JUL-2018
ENERGY MEASURESEnergy-Saving Light Bulbs - Internal SpacesEnergy-Saving Light Bulbs - External Spaces
WATER MEASURESLow-Flow ShowerheadsLow-Flow Faucets for Kitchen SinksLow-Flow Faucets for WashbasinsDual Flush for Water Closets
MATERIALSFloor Slabs - In-Situ Reinforced Concrete SlabRoof Construction - Micro Concrete Tiles on Steel RaftersExternal Walls - Honeycomb Clay Blocks with Internal & External PlasterExternal Walls - In-Situ Reinforced WallInternal Walls - In-Situ Reinforced WallInternal Walls - Honeycomb Clay Blocks with Plaster on Both Sides
THIS CERTIFIES THAT127 LivingTransversal 60 No.125-50Bogota, Cundinamarca
15-JUL-2021DATE OF EXPIRY16-JUL-2018DATE OF ISSUE
CAMACOLCERTIFIED BY
EDGE Software Version: v2.1.5Angel RodriguezWAS AUDITED BY
LP9-COL-17101710011566-900-PCERTIFICATE NUMBER
EDGE PRELIMINARY CERTIFICATEHAS ACHIEVED AN
Constructora BolivarDEVELOPED BY
Colombia
Thomas Saunders, EDGE Program Director
www.edgebuildings.comEDGE is a registered trademark of IFC. ©IFC 2018The EDGE standard requires 20% efficiencies in energy, water and materials compared to a local benchmark. Predicted efficiencies are not a guarantee of future operational performance. Energy savings may be associated with virtual energy for comfort depending on the presence of heating and cooling systems. Virtual energy does not contribute savings to utility bills.
This certificate is issued by the Certifier based on information provided by the client and the audit by the Auditor, and is subject to the terms and conditions of the Certifier. Contact edge@ifc.org if the above measures are not consistent with your observation on the project.
Subproject Name
House or Apartment Block Name
Subproject Multiplier for the Project
Address Line1
Address Line2
City
State/ Province
Postal Code
Country
Subproject Details
Bulevar
Living 127
1
Transversal 60 No.125-50
Bogota
Cundinamarca
Colombia
:
:
:
:
:
:
:
:
:
Subproject Type New Building:
Certification Stage Preliminary:
Status
Auditor
Certificate Issued
Angel Rodriguez
:
:
Certifier CAMACOL:
Location Data
Country
City
Income Category
Colombia
Bogota
Low
:
:
:
Project DetailsProject Name
Number of Distinct Buildings
Number of EDGE Subproject(s) associated
Bulevar
1
1
:
:
:
Total Project Floor Area 42,750 m²:
Project Owner Name
Project Owner Email
Constructora Bolivar
valentina.correa@constructorabolivar.com
:
:
Project Owner Phone 3114888820:
Address Line1
Address Line2
City
State/ Province
Postal Code
Country
Transversal 60 No.125-50
Bogota
Cundinamarca
Colombia
:
:
:
:
:
:
Project Number 1000103736:
Associated Subproject(s)Bulevar
1
EDGE Version :File Number :Created By :
Date Time :
2.1.517101710011566Constructora Bolivar
16-Jul-2018 11:32:121000103736Project No. :Modified By : Angel Rodriguez
Building Systems
Does building design include an AC system?
Does building design include space heating system?
No
No
:
:
Building Data Area Details
Type of Unit
Average Unit Area
Bedrooms/Unit
Floors
Units
Occupancy (People/Unit)
m²
no.
no.
no.
no.
Flats/Apartments
38
1
15
900
2
Bedroom
Kitchen
Living/Dining
Bathroom
Utility, Balcony, Service Shaft**
Gross Internal Area
External Wall Length m/Unit
Window to Floor Ratio
Default User Entry
**The Utility, Balcony, Service Shaft (m²) field is equal to the remaining space required to total the Gross Internal Area (m²).
8
4
9
1
14.70
38
3
7.2%
8.99
3.48
8.40
2.43
m²
m²
m²
m²
m²
m²
m
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Roof Area/Unit 3 m²:
Common Area/Unit 10 m²:
Key Assumptions for the Base Case
AC System Efficiency
Glass SHGC
Glass U - Value
Wall U - Value
Roof U - Value
Hot Water Boiler Efficiency
Solar Reflectivity for Paint - Roof
Solar Reflectivity for Paint - Wall
Window to Wall Ratio
CO₂ Emissions g/kWh of Electricity
Latitude
Cost of Water
Cost of LPG/Natural Gas
Cost of Diesel Fuel
Cost of Electricity
Fuel Used for Space Heating
Fuel Used for Hot Water
Default User Entry
Electric Resistance
Electricity
0.08
0.95
0.04
0.04
5
220
30%
0.40
0.30
0.80
2.12
1.86
5.75
0.80
2.90
Natural Gas
Electricity
$/kWh
$/L
$/L
$/kL
Deg
g/kWh
%
%
%
%
W/m² K
W/m² K
W/m² K
Factor
COP
Dec
Nov
Oct
Sep
Aug
Jul
Apr
May
Default
Mar
Feb
Jan
Monthly Average Outdoor Temperature (deg.C)
Jun
User Entry
12.9
13.2
13.6
13.8
13.8
13.5
13.1
13.1
13.1
13.2
13.4
12.9
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
2
EDGE Version :File Number :Created By :
Date Time :
2.1.517101710011566Constructora Bolivar
16-Jul-2018 11:32:121000103736Project No. :Modified By : Angel Rodriguez
Energy Efficiency Measures 24.18% Meets EDGE Energy StandardENERGY SAVINGS
RESULTS153.39 kWh/Month/Unit
3.38 kL/Month/Unit
0.19 tCO₂/Year/Unit
38931.68 MJ/Unit
12.83 $/Month/Unit
3.49 $/Month/Unit
Final Energy Use Operational CO₂ Savings
Final Water Use Embodied Energy Savings
Base Case Utility Cost
Utility Costs Reduction
:
:
:
:
:
:
314.18 $/Unit Incremental Cost :
7.51 Yrs.Payback in Years :
648.00 MWh/YearEnergy Savings : 12606.19 m³/YearWater Savings :
35038.51 GJEmbodied Energy in Material Savings
: 42750.00 m²Aggregate Floor Space including Multiplier
:
0.42 tCO₂/Year/Unit CARBON SAVINGS
3
EDGE Version :File Number :Created By :
Date Time :
2.1.517101710011566Constructora Bolivar
16-Jul-2018 11:32:121000103736Project No. :Modified By : Angel Rodriguez
HME19
HME18
HME17
HME16
HME15
HME14
HME13
HME12
HME11
HME20
HME21
Air Conditioning System - COP of 3.5
High Efficiency Boiler for Space Heating - Efficiency of 95%
High Efficiency Boiler for Hot Water - Efficiency of 95%
Heat Pump for Hot Water - COP of 3
Energy-Efficient Refrigerators and Clothes Washing Machines
Energy-Saving Light Bulbs - Internal Spaces
Energy-Saving Light Bulbs - Common Areas and External Spaces
Lighting Controls for Common Areas and Outdoors
Solar Hot Water Collectors - 50% of Hot Water Demand
Solar Photovoltaics - 25% of Total Energy Demand
Smart Meters
No
No
No
No
No
Yes
Yes
No
No
No
No
Collector Area (m²)/Unit
% Hot Water
COP
% Eff.
% Eff.
COP
% of Annual Electricity Use
Capacity kWp/Unit
10
-
16
-
No HME22 Other Renewable Energy for Electricity Generation Source type Wind
5.90% of Annual Electricity Use
HME10
HME09
HME08
HME07
HME06
HME05
HME04
HME03
HME02
HME01 Reduced Window to Wall Ratio - WWR of 44.95%
Reflective Paint/Tiles for Roof - Solar Reflectivity (albedo) of 70
Reflective Paint for External Walls -Solar Reflectivity (albedo) of 70
External Shading Devices - Annual Average Shading Factor (AASF) of 0.53
Insulation of Roof - U Value of 0.47
Insulation of External Walls - U Value of 0.4
Low-E Coated Glass : U-value of 3 W/m².K and SHGC of 0.45
Higher Thermal Performance Glass : U-value of 1.9 W/m².K and SHGC of 0.28
Natural Ventilation
Ceiling Fans in All Habitable Rooms
Yes
No
No
No
No
No
No
No
No
No
WWR %
SHGC
W/m² K
SHGC
W/m² K
W/m² K
W/m² K
AASF
SR
SR
44.95
100
100
0.6
2.70
0.49
2
5.6
No HME23 Offsite Renewable Energy Procurement -Equal to 100% of total Operational CO2 % Annual Operational CO2
-kWh/Year
No HME24 Carbon Offset-100% of Total CO2 % Annual Operational CO2
-tCO2/Year/Unit
4
EDGE Version :File Number :Created By :
Date Time :
2.1.517101710011566Constructora Bolivar
16-Jul-2018 11:32:121000103736Project No. :Modified By : Angel Rodriguez
Water Efficiency Measures 25.68% Meets EDGE Water Standard
% of Roof Area Used
L/flush
1st - L/flush
2nd - L/flush
L/min
L/min
L/min
HMW08
HMW07
HMW06
HMW05
HMW04
HMW03
HMW02
HMW01Yes
Yes
Yes
Yes
No
No
No
No
Low-Flow Showerheads - 6.5 L/min
Low-Flow Faucets for Kitchen Sinks -8 L/min
Low-Flow Faucets for Washbasins - 6 L/min
Dual Flush for Water Closets - 6 L/first flush and 4.2 L/second flush
Single Flush for Water Closets - 6 L/flush
Rainwater Harvesting System - 50% of Roof Area Used for Rainwater Collection
Recycled Grey Water for Flushing
Recycled Black Water for Flushing
6.5
8
6
6
4.2
5.2
100
WATER SAVINGS
5
EDGE Version :File Number :Created By :
Date Time :
2.1.517101710011566Constructora Bolivar
16-Jul-2018 11:32:121000103736Project No. :Modified By : Angel Rodriguez
Materials Efficiency Measures 51.58%
HMM01 Floor Slabs
mm
mm
Steel Rebar
Embodied Energy Savings
In-Situ Reinforced Concrete Slab
300 mm
Steel : 33 kg/m²
In-Situ Reinforced Concrete Slab
300 mm
Steel : 33 kg/m²
In-Situ Reinforced Concrete Slab
Micro Concrete Tiles on Steel Rafters
127 11.37
Meets EDGE Materials Standard
HMM02 Roof Construction
HMM03 External Walls
mmCommon Brick Wall with Internal & External Plaster
200 mm
93%
7%
Type 1
Type 2
Honeycomb Clay Blocks with Internal & External Plaster
In-Situ Reinforced Wall
120
200 mm
kg/m²
Type 1 100%
ThicknessProportion %
6
EDGE Version :File Number :Created By :
Date Time :
2.1.517101710011566Constructora Bolivar
16-Jul-2018 11:32:121000103736Project No. :Modified By : Angel Rodriguez
HMM06
HMM05
HMM04 Internal Walls
Flooring
Window Frames
Common Brick Wall with Plaster on Both Sides
100 mm
Ceramic Tile
Aluminium
Single Glazing
88%
12%
100%
100%
Type 1
Type 1
Type 1
Type 2
In-Situ Reinforced Wall
Honeycomb Clay Blocks with Plaster on Both Sides
Ceramic Tile
Aluminium
150
120
mm
mm
Single Glazing
ThicknessProportion %
7
EDGE Version :File Number :Created By :
Date Time :
2.1.517101710011566Constructora Bolivar
16-Jul-2018 11:32:121000103736Project No. :Modified By : Angel Rodriguez
Building Type Certification Stage Subproject NameHomes Preliminary Bulevar
Energy Measures Preliminary Audit RequirementsHME01 Reduced Window to Wall Ratio > Calculation of “Glazing Area” and “Gross Exterior Wall Area” for each façade of the building and the
average building area weighted WWR using the WWR calculator
> All façade elevation drawings showing glazing dimensions and general building dimensions.
HME16 Energy-Saving Light Bulbs - Internal Spaces
> Lighting schedule listing type and number of bulbs specified.
> Electrical layout drawings showing the location and type of all installed bulbs.
HME17 Energy-Saving Light Bulbs - External Spaces
> Lighting schedule listing type and number of bulbs specified.
> Electrical layout drawings showing the location and type of all installed bulbs.
Water Measures Preliminary Audit RequirementsHMW01 Low-Flow Showerheads > Plumbing drawings/specifications including make, model, and flow rate of the showerhead(s).
> Manufacturer’s data sheet for the showerhead(s) confirming the flow rate at 3 bar.
HMW02 Low-Flow Faucets for Kitchen Sinks > Plumbing drawings/specifications including make, model, and flow rate of kitchen(s) faucet(s) or flow restrictor(s).
> Manufacturer’s data sheet for faucet(s)/flow restrictor(s) confirming the flow rate at 3 bar.
HMW03 Low-Flow Faucets for Washbasins > Plumbing drawings/specifications including make, model, and flow rate of the washbasin faucet(s) or flow restrictor(s).
> Manufacturer’s data sheet for faucet(s)/flow restrictor(s) confirming the flow rate at 3 bar.
HMW04 Dual Flush for Water Closets > Plumbing drawings/specifications including make, model, and flush volumes of water closet(s).
> Manufacturer’s data sheet for water closet(s) with information on the flush volume of the main and reduced flushes.
Material Measures Preliminary Audit RequirementsHMM01 Floor Slabs > Floor sections showing build-up of the floor; or
> Manufacturer’s data sheet for specified building material if applicable; or
> Bill of quantities with the floor slab specification clearly highlighted.
HMM02 Roof Construction > A section drawing of roof showing the materials and thicknesses; or
> Manufacturer’s data sheet for specified building material; or
> Bill of quantities with the materials used for roof construction clearly highlighted.
HMM03 External Walls > Façade drawings clearly marking the external wall specification selected; and
> Drawings of the external wall sections; or
> Manufacturer’s data sheet for specified building material; or
> Bill of quantities with the materials used for the external wall clearly highlighted.
HMM04 Internal Walls > Drawings of the internal wall sections; or
> Manufacturer’s data sheet for building materials used for internal wall specifications if available; or
> Bill of quantities with the materials used for the internal wall clearly highlighted.
HMM05 Flooring > Drawings clearly marking the flooring specification selected; or
> Manufacturer’s data sheet for building materials used for floor specifications; or
> Bill of quantities with the materials used for the flooring clearly highlighted.
HMM06 Window Frames > Façade drawings clearly marking the window frame(s) specification; or
> Manufacturer’s data sheet for glazing specified; or
> Bill of quantities with the windows/window frames clearly highlighted.
EDGE Certification Checklist
8
EDGE Version :File Number :Created By :
Date Time :
2.1.517101710011566Constructora Bolivar
16-Jul-2018 11:32:121000103736Project No. :Modified By : Angel Rodriguez