Post on 05-Jan-2017
transcript
Daimler India Commercial Vehicles Pvt. Ltd.
QM/8-1-2014 1
INDUSTRIAL TRAINING REPORT (Duration -45 Days at PTI)
Daimler India Commercial Vehicles Pvt. Ltd.
QM/8-1-20142
Introduction
Focus area in assembly
Quality Feedback loops & Quality Gates
Quality inspection gates
Damage code purpose
Damage code architecture and comparison
Project description and methodology
Acknowledgement
1
3
2
5
4
6
Training period : 5th Dec’13 To 17th Jan’14Trainer : Mr. Muralikrishna.P / Mr. Bhaskar.PProject : Damage codes
7
8
Daimler India Commercial Vehicles Pvt. Ltd.
Introduction
Well over a century ago, when horse-drawn modes of transport were the only known ways of mobility in the world, Gottlieb Daimler and Carl Benz came up with a revolutionary idea: motorized movement.
By combining an engine with a cab-over-chassis structure, the first truck was invented.
Our rich history of over 125 years of innovation is driven by excellence that continues into the 21st century. Numerous patents in automotive performance, safety and eco-friendly innovations, some of which are milestones in the history of the truck, are eloquent testimonies to our commitment to redefining mobility for the world.
As the inventor of the truck, Daimler assumes responsibility for their future. Our Road to Emission-free Driving stands for our commitment to securing sustainable mobility.
Our aim is to markedly reduce fuel consumption and emissions already today and to eliminate them entirely in the long term. To this end, we are developing a broad spectrum of state-of-the-art drive technologies that meet the specific requirements placed on today’s and tomorrow’s mobility in all modes of road transportation.
QM/8-1-20143
Daimler India Commercial Vehicles Pvt. Ltd.
4
Introduction
In DICV PTI shop , engine and transmission are assembled such as 170kw & 205kw HDT Engine
and G131, G85 & MO36 Transmission are assembled .
EURO 3 OM-906 LA G131 G85 MO36
QM/8-1-2014
Daimler India Commercial Vehicles Pvt. Ltd.
QM/8-1-20145
CRANKSHAFTCAM SHAFT
CYLINDER HEAD
CONNECTING ROD
CRANKCASE
ENGINE MAIN PARTS
Introduction
Daimler India Commercial Vehicles Pvt. Ltd.
QM/8-1-2014 6
INPUT SHAFT
COUNTER SHAFTMAIN SHAFT
TRANSMISSION MAIN PARTS
-1st gear -2nd gear -3rd gear -4th gear -5th gear -6th gear -Reverse gear -Gear hubs -Tapper roller
Bearing-Oil seal-Oil pipe-Circlip
-Tap roller gear-1st gear bracing-2nd gear bracing-3rd gear bracing-4th gear bracing-5th gear bracing-6th gear bracing-Twin gear
Introduction
Daimler India Commercial Vehicles Pvt. Ltd.
QM/8-1-2014 7
• Washing and cleaning cabinet•
•Torque analyser
PERFORMANCE TEST•SFC , Power and smoke Test
• Casting and forging material confirmation
• Tear down audit
•Geometrical parameters and indexing in gears
Focus area in engine and
transmission assembly
PART MATERIAL QUALITY PART CLEANLINESS
TORQUE INTEGRITY PRODUCT AUDIT
PART DIMENSIONAL QUALITY
Focus area in assembly
Daimler India Commercial Vehicles Pvt. Ltd.
DICV Q-CONCEPT
Q means QUALITY
QM/8-1-20148
The Q-Concept describes the functions ofthe QM and its relations to Production,Logistics, and Supplier Management. It willbe signed of by all Vice Presidents of DICV.Main contents are:Q-Methods, Standards, Product liabilityrequest, Q-Philosophy for Feedback loops,tasks and responsibilities etc.Supporting process descriptions are linkedto the operative documents e.g. checklist.T
Q-C
once
pt
Engine and transmission QSETTING UP QUALITY PROCESS THROUGH •Manufacturing PPAP•PFMEA•Control plan•Process study capability•Operator self certification•100% quality gates inspection•Section product audit•Process auditThe realization of this Q-concept is
monitored by QM during the project phase with a tool called “Q-Plan” and is the basis of Q-Release for process and product
Daimler India Commercial Vehicles Pvt. Ltd.
Quality feedback loops 0-5
QM/8-1-2014 9
Daimler India Commercial Vehicles Pvt. Ltd.
QM/8-1-2014 10
Engine and transmission assembly quality gates
Daimler India Commercial Vehicles Pvt. Ltd.
Quality inspection gates in engine assembly
QM/8-1-201411
Daimler India Commercial Vehicles Pvt. Ltd.
Quality inspection gates in transmission assembly
QM/8-1-201412
Daimler India Commercial Vehicles Pvt. Ltd.
Damage Code purpose
During the transportation chain when automobiles change possession they must be inspected immediately with any
damage or missing items being noted. The purpose of this manual is to provide a standard up-to date set of codes for
recording vehicle exceptions to all personnel responsible for handling vehicles throughout the transportation chain.
It is important the damage codes be accurately detailed. The codes are recorded manually on delivery receipts or in
portable data terminals for transfer into the manufacturers claims systems. Individual manufacturers may issue
manuals with photographs depicting several of the damage areas and types. Damage are of many types like
Broken , Broken off , Sheared off , Disengaged but continued to run , Engaged and overrun , Cracked , Torn, Torn
off, Burst , Sewing/thread fault etc.
Damage code helps in easy understanding of the damage part in the vehicle . If the customer complained about
any part then the customer care service centers will analyze that part and note down the damage in the vehicle in
the form of damage code and can send that vehicle to the company for damage reference . Every part has some
damage code from washer to crankcase.
QM/8-1-201413
Daimler India Commercial Vehicles Pvt. Ltd.
Damage code architecture
QM/8-1-201414
Daimler India Commercial Vehicles Pvt. Ltd.
Damage code concept comparison
QM/8-1-201415
Daimler India Commercial Vehicles Pvt. Ltd.
Project description
The purpose of this project is to provide a standard up-to date set of Damage codes for recording the defects in
the online concern tracking portal and MES usage .I have compared the Build sheet parts and the damage codes
available on the online portal and compiled the coded which were not available with the classification.
Current status - Total damage codes available in online portal for engine : 2041
- New damage codes compiled/developed : 645
- Gap between available & required : 645
QM/8-1-201416
Daimler India Commercial Vehicles Pvt. Ltd.
QM/8-1-201417
Damage code developed (SAMPLE)
Failure Type area
Digit 1
CONSTRUCTION GROUP 'DAMAGE
PARTDigit 2-3
LOCATION 'DAMAGE PART
Digit 4-6 DAMAGEPARTDESC
DAMAGE TYPE
Digit 7-8
REPAIR TYPEDigit 9
DAMAGE TYPE
Digit 10-11 DAMAGE TYPE DESCRIPTION
ASSEMBLED DAMAGE CODE
UPTO 11TH DIGIT
Q 03 201 Connecting rod 28 X 00 offset Q0320128X00Q 03 201 Connecting rod IA X 05 Material fault Q03201IAX05Q 03 201 Connecting rod 99 X 10 Damaged Q0320199X10Q 03 201 Connecting rod 42 X 00 Poor fit Q0320142X00Q 03 201 Connecting rod C8 X 00 Incorrect part Q03201C8X00
Q 03 301 Piston, Engine 28 X 00 offset Q0330128X00Q 03 301 Piston, Engine IA X 05 Material fault Q03301IAX05Q 03 301 Piston, Engine 99 X 10 Damaged Q0330199X10Q 03 301 Piston, Engine 42 X 00 Poor fit Q0330142X00Q 03 301 Piston, Engine C8 X 00 Incorrect part Q03301C8X00
Daimler India Commercial Vehicles Pvt. Ltd.
Methodology followed
QM/8-1-2014 18
Current data of online damage code available was reviewed I reviewed the main damage codes list available at DICV and compared it with all the parts used in assembly
line and listed all those parts which were not having damage codes.
Actual data collected After listed all the parts which were not having their damage codes , their construction group , location ,
damage type were collected from the DICV damage part codes list.
Gap analyzed Total 645 damage codes were not available in the DICV damage codes list .
Compiling the new damage codes
After collecting all the data ( construction group , location, damage type) then it were compiled in
according to damage code architecture .
Uploading the new file with developed existing damage code file.
Result
Total damage codes including new damage codes : 2686
Daimler India Commercial Vehicles Pvt. Ltd.
Acknowledgement
I am highly grateful to Daimler India Commercial Vehicles Pvt. Ltd . for allowing me to do this project work. It is truly a matter of great pleasure me to express my sincere thanks and gratitude to Daimler India Commercial Vehicles Pvt. Ltd . for his supervision and encouragement throughout this project.
I am highly obliged to “ Bhaskar.P , Muralikrishna P, Sampath Kumar K ,Baraneedharan S , Jayakumar V , Arvind S ” for their guidance kind concern and encouragement throughout this project.
I am immensely indebted to “ Daimler India Commercial Vehicles Pvt. Ltd .” for the invaluable help that he rendered at every step of this project. It is a wonderful experience to be a part of “Daimler India Commercial Vehicles Pvt. Ltd . ” Where I work under brilliant minds. I owe my deep regards for the supporting and kind staff authorities who helped me in my lean patches during these 1.5 months.
The knowledge I gained throughout our studies have the practical implementation during this period. I am grateful to all the staff of “Daimler India Commercial Vehicles Pvt. Ltd . ”
YOURS OBEDIENTLY ANUBHAV GOEL
QM-8/1/2014
19