FLUID MANAGEMENTValve Remote Control • Tank Content Measurement • Bunker Management
Ballast Water Management • Draught Measurement Dynamic Draught Measurement • Sensor Toolbox HOSET
01
MAIHAK SHAFT POWER METERSenime nimi, tendel id enduciisti quis accab illeniminci voluptatem qui tem. Ga. Dolorest imusamus, sanimin con nones volorrorum exerit fuga. Evelest iumque dolestempor rem qui re aut volumquam netUdae. Corit volupiet que labo. Itas et.
Facestrum voloraes eicienitat tur, simendi gendusa ndelentur asintio restia cusciat urepro temod magnimpor as etusae dipieni hitata pe namus evel eat quatem vel exerit harum doluptatur sequi ut mo et et etur? Elendic
iistibus evellor epudit eatius acid magnat occuptatem. Lo vid modiciat et posam ipsapero temporibusam iumqui nus re et fugit et omnimin
Ihilique num, sit as venita quasped modi renia pratese quaspit, comnit eum qui con commolore nescimus, volorio nsequi occat ut omnis illaborum expliate veni cus que lit rento totae mossimu scius, inci andianditis enim quiam ipsanto taepudit exeritis audaepercid quatem et laborro di omnitate plautat pore si volestius ulparum.
01
www.hoppe-marine.com
FLUID MANAGEMENT
Content
About Hoppe 02
Valve Remote Control 04
Tank Content Measurement 10
Bunker Management 12
Ballast Water Management 14
Draught Measurement 16
Dynamic Draught Measurement 18
Sensor Toolbox HOSET 20
Hoppe Systems and Components 22
Hoppe Marine Fluid Management systems are fulfilling the global market demand for smart, integrated systems such as Valve Remote Control, Tank Content Measurement, Draught Measurement, Ballast Water and Bunker Management.
Hoppe Marine Fluid Management systems are known for flexibility, easy handling, and reliability. All solutions are tailored to the customer demands, are continuously enhanced and can be cross-linked to other Hoppe systems.
All controls, components are type-approved by leading classification societies. All systems are based on Hoppe’s own and proven hardware and software components, which ensures maximum reliability and avoids interfacing problems.
0302
ABOUT HOPPEHoppe is a family owned group of companies with global presence and activities focused and dedicated to the maritime market. It’s passion for Technology has been the company’s key of success in more than six decades with the permanent motivation to deliver customer-oriented products and services.
Starting with the business idea to deliver precise instruments and measuring equipment for seagoing vessels (ship speed and power), Hoppe Bordmesstechnik was founded in 1949 by the German engineer Dipl.-Ing. Hans Hugo Karl Hoppe. The work life of Hans Hoppe was characterized by many technical inventions and patents for on-board measuring systems. After 35 years of successful work life Hans Hoppe passed away and his colleague Jürgen Haas took over the company and put things on the right track for the future of Hoppe. Four years later (1990) Helmut Rohde joined Hoppe as partner before finally taking over all shares of the company in 1997. The Hoppe era of the Rohde family business started.
Besides many years of organic growth the Rohde family established business in further maritime markets to follow the globalization of the shipbuilding business. In 1997 Hoppe Korea was established, followed by Hoppe China in 2010 and Hoppe Singapore in 2017. In parallel, strategic investments were made with the acquisitions of Meramont Automatyka (Poland), MAIHAK Marine (Germany), Flume Stabilization (USA) and INTERING ship stabilization systems (Germany). Combined with many new inventions and patents Hoppe has established a leading position in several maritime business areas.
The passion for technology is still unbroken and all Hoppe products are fully designed in Germany by our skilled engineers. This means that Hoppe has the full technical control over its portfolio and remains dedicated to quality, accuracy and reliability. With this approach Hoppe has maintained a very good market reputation ever since.
Being a fully independent family-owned company Hoppe is well known in the market as a reliable long-term partner. Hoppe combines decades of engineering know-how, sustainable on-board experiences with the continuous development of new technologies and innovations. Based on the strategic product- and service-focus approach Hoppe is a key player also in the digitalization process of the marine industry.
04 05
VALVE REMOTE CONTROLHoppe Marine Valve Remote Control solutions are available for pneumatic, hydraulic, electrohydraulic or electric operation of valves, as well as for the control of pumps used in ballast, bilge, fuel oil and liquid cargo systems.
All systems are controlled by PLC unit HOMIP with 6“ touch screen and with several interfaces to other systems. It is designed for easy handling and operation.
Widescreen workstations are available for various operation locations and provide a clear visualisation of fluid systems including pipes, valves, pumps, flow lines and tank contents.
All main components are engineered and produced in-house. This allows continuous research and development activities for product improvement and optimization.
KEY FEATURES
• All main components are in-house designed and engineered
• Experienced and customer related project engineering • Systems with highly reliable actuators and valves installed in more than 1000 vessels worldwide
• Made in Germany with competitive market price • Approved by major classification societies
COMPONENTS
• Rotating and linear actuators of pneumatic, hydraulic, electro-hydraulic or electric type for various valve types and makers.
• Control cabinets and/or substations for signal conversion and power feeding
• PLC unit HOMIP for logic control and interface to workstations or other systems
• Workstations as user interface with comprehensive live visualization
The PLC unit HOMIP with 6“ touch screen for valve remote control.
F1 F2 F3 F4
BA 11009
closed
LS closeLS opencmd closecmd openlockedext. controlfail
open close
06 07
VALVE REMOTE CONTROL
PNEUMATICKEY FEATURES
• Operates on standard on board working air without special air treatment
• Most cost efficient system solution • Environmentally friendly • Weight and space advantages • Smart actuator design with integrated feedback signal and connections
• Significant installation savings by using Hoppe’s unique hybrid connection cable HOCAB (incl. air supply and feedback signal)
EXECUTIONS
• Quarter turn actuators for butterfly-/ball valves • Linear actuators for globe valves • All on board installation requirements (hazardous area, submerged, open deck, etc.)
• All required functions (emergency close/open, keep-position, etc.)
• Open/close or intermediate operation
VALVE REMOTE CONTROL
HYDRAULICKEY FEATURES
• Smart actuator design with integrated stop valve, flush function and quick connections for portable hand pump
• Weight and space advantages • Compact solenoid valve manifolds with emergency operation function
• Reliable central hydraulic power unit (HPU) with bladder accumulator
• Wide torque range
EXECUTIONS
• Quarter turn actuators for butterfly-/ball valves • Linear actuators for globe valves • All on board installation requirements (hazardous area, submerged, open deck, etc.)
• All required functions (emergency close/open, keep-position, etc.)
• Hydraulic locking device function • Open/close or intermediate operation with direct or indirect feedback signal
08 09
VALVE REMOTE CONTROL
ELECTRO-HYDRAULICKEY FEATURES
• Automatic failure and closed loop detection • Individual configuration of actuator functions via BUS control
• Local control mode for LPU • Easy address setting via PLC unit HOMIP • Installation savings by cable loop design • Space savings due to reduced cabinet dimensions
EXECUTIONS
• Same executions available as for standard electro hydraulic series
• Redundant power supply • Ring supply units (RSU) with BUS communication and multi master control
• Suitable for single or double cable installations (power and control)
BUS CONTROLLEDKEY FEATURES
• Modular design based on Hoppe’s hydraulic actuator series
• Lightweight and compact local power units (LPU) • Oil level visibility for easy maintenance • Individual solutions with explosion prove LPU or separate control boards
• Smart control concept with hybrid motor starter solution
EXECUTIONS
• Quarter turn actuators for butterfly-/ball valves • Linear actuators for globe valves • All on board installation requirements (hazardous area, submerged, open deck, etc.)
• All required functions (emergency close/open, keep-position, etc.)
• Open/close or intermediate operation
10 11
Hoppe Marine Tank Content Measurement solutions continuously monitor the contents of ballast, fuel oil and other liquids on board, with various sensor types.
The hydrostatic pressure sensors HCG 2011 and HCG 4011 have been specially developed to detect the levels of wide range of liquids with different media properties. The pressure sensors of the HCG series can be configured to the required measuring range, housing material and process adaptor. They are based on a piezo resistive measuring cell, which converts the hydrostatic pressure into an electronic signal. Measurement with pressure sensors is independent of foaming (cappuccino effect).
The pressure sensor HCG 2011 provides a signal of 4 – 20 mA and allows customised measuring ranges, adjustable via HART protocol. The pressure sensor HCG 4011 is designed with a digital serial BUS interface, which allows cost saving cable loop installations.
The electro pneumatic pressure sensors are installed inside control cabinets and measure the liquid level via a system of continuously bubbling air. The measuring unit is fully equipped with all necessary features of air flow indication, air flow adjustment, purge function as well as stop and safety valves in order to protect the measuring cell against liquid ingress.
TANK CONTENT MEASUREMENT KEY FEATURES
• Full responsibility for the tank content data • Reliable and accurate in house designed sensors • Experience on more than 2,400 vessels worldwide • Adjustable measuring range up to 4,000 mbar • Installation savings by usage of BUS type sensor • Sensor toolbox HOSET for optimized maintenance and lifetime analysis
• Made in Germany with competitive market price • Approved by major classification societies
COMPONENTS
Hydrostatic pressure sensors HCG • HCG 2011 analogue type, 4 – 20 mA • HCG 4011 digital BUS type • Stainless steel powder coated or titanium housing • PT-100 temperature sensor integrated • Plugable sensor cables
Electro-pneumatic pressure sensors inside cabinet • Air flow indication and adjustment • Stop and safety valves
PLC unit HOMIP for tank content calculation • 6” touch screen • Trim, list and density correction • Interfaces to Hoppe or 3rd party systems
The PLC unit HOMIP with a 6” touch screen for tank content calculation including trim and list correction.
F1 F2 F3 F4
HFO 2 PS M
Sensor A
74.0 m3
2.23 m
Log
72.5 t56.0 C0.210 Bar
LevelWeightTempPress
on Sensor A
74.0 m3
2.23 m72.5 t56.0 C0.210 Bar
on
12 13
Ballast BilgePLCOnlineSystem
TI1 VC1 Control air pressure Panel 4 Panel 5
Fuel
FW Tk PS
61.11 m3
20 m3
42 dg.C
No2 HFOSett
19.97 m3
6 m3
42 dg.C
FW Tk SB
61.11 m3
20 m3
42 dg.C
Tech Water
31.4 m3
10 m3
T high
No3 HFO LS P
119.88 m3
39 m3
42 dg.C
T high
T high
lo
hi
hi
lo
hi
hihi
hi
MDO Stor Tk
75.92 m3
25 m3
hihi
hi
No1 HFO S PS
209.39 m3
69 m3
42 dg.C
T high
T high T high
hihi
hi
No3 HFO LS S
54.81 m3
18 m3
42 dg.C
hihi
hi
T high
No2 HFO STOR
65.27 m3
21 m3
42 dg.C
hi
hi
MGO Stor Tk
63.08 m3
21 m3
hihi
hi
No1 HFO S SB
209.39 m3
69 m3
42 dg.C
hihi
hi
No2 HFOServ
17.1 m3
5 m3
42 dg.CT high
No1 HFOServ
17.1 m3
5 m3
42 dg.CT high
lolo
No1 HFOSett
22.8 m3
7 m3
42 dg.CT high
MGO ServTk
10.86 m3
3 m3
lolo
hi
lo
MDO SettTk
20.59 m3
6 m3
MDO ServTk
14.92 m3
4 m3
FO OverfTk
20.8 m3
6 m3
T high
T high
42 dg.C
FTV03
FTV36
FTV08
FTV01
FTV06
FTV05
FTV 12
FTV 11
Filling Station
Filling Station
FTV 09
FTV56
FTV10
FTV08
FTV04
FTV02
FTV07
Emerg Diesel&
Incin Tank
HFO/MDOOverflow
Piping
MDOSettl Tkemotv
MGOServ Tkemotv
FOPurifier
MGO Trans P
MDO Trans P
HFO Trans P
FODrain
MDOServ Tkemotv
0,00bar
0,00bar
0,00bar
0,00bar
0,00bar
0,00bar
F>
HFOOverflow
AlarmTank
MDO/MGOOverflow
AlarmTank
F>
A precise and comprehensive overview of bunker activities and fuel oil consumption has become an essential key factor for efficient ship operation.
Hoppe Marine’s Bunker Management system is a soft-ware solution for continuous monitoring and reporting of all bunker intakes, fuel oil transfer procedures, fuel oil consumptions and fuel remaining on-board. It is a smart add-on to a precise Tank Content Measurement system.
Hoppe’s hydrostatic pressure senors of the HCG series are specialized for the precise bunker mass (mT) deter-mination and recording. Foaming (cappuccino effects) are eliminated by measuring principle.
A total energy balance supervision is provided additionally, which is mainly based on data from Hoppe Marine Tank Content Measurement, MAIHAK Shaft Power and Performance Monitoring as well as mass flow counters.
BUNKER MANAGEMENTKEY FEATURES
• Intake supervision of fuel oil mass (mT) during bunkering process including report function for bunker intake and bunker discrepancy
• Supervision and recording of all bunker transfer activities within the vessel
• Voyage orientated bunker transfer supervision with deviation analysis and remaining bunker on board report
• Add-on possibility for evaluation of Energy Balance
ADVANTAGES
The system enables the ship operator to have a full overview about the movements and the storage of the valuable fuel oil at all time during ship operation. Influencing effects such as for example usage of back flush filter, sludge volume, separator operation or cappuccino effects are monitored by measuring principles and/or statistical analytics. Based on its permanently data logging and analysis features it is a valuable tool in parallel to manual entered fuel data and bunker barge recordings.
14 15
Handling of ballast water, especially ballast treatment, based on IMO requirements has significant impact on the efficiency of the vessel’s operation.
The Hoppe Ballast Management System is a sophisticated and user friendly software solution supporting all ballast water operations. The vessel’s loading case, stability information, hull stress and floating criteria, e. g. optimum trim can be considered to determine improved ballast operations.
As a result ballast operations are proposed and supported by simulation routines which consider the vessel’s stability criteria during the ballast process. The system provides ballast operation job lists which can be forwarded to Hoppe’s Valve Remote Control System for automatic or manual source target control.
Ballast operation reports using data from pumps, valves, tank contents, treatment unit and GPS coordinates round up the scope of supply.
BALLAST WATER MANAGEMENTRETROFIT
Hoppe Marine provides assistance to ship owners for optimized retrofit solutions of ballast treatment systems on running vessels, based on our long term experience in overall ballast management systems. Support is given for selection of appropriate treatment system, integration concept into existing ballast systems considering optimized installation costs and adaption of Hoppe Valve Remote Control system.
BALLAST OPERATION & REPORTING
Hoppe provides a comprehensive ballast reporting based on data from pumps, valves, tank contents, treatment units as well as GPS coordinates. It covers all ballast operations from treatment units, by passes or other internal ballast water sequences. As result an automized digital ballast book report can be generated.
Ballast Fuel BilgePLCOnlineSystem
TI1 VC1 Control air pressure Panel 4 Panel 5
BWV05
BWV 03
BilgeEmergSuction
BWV10
Set Pos.
BWV 16
Pset
BWV 06
BWV 07
0%No1
BALLAST WATERTREATMENT
0%
20%
40%
60%
80%
100%
No.1 BP
BWV 08
SEAMAIN
SEAMAIN
No7 WB SPS
227.42 m3
75 m3
No6 WB SPS
250.34 m3
83 m3
No5 WB SPS
250.38 m3
83 m3
No4 WB SPS
230.75 m3
76 m3
No3 WB SPS
170.48 m3
56 m3
No7 WB SSB
227.42 m3
75 m3
No6 WB SSB
250.34 m3
83 m3
No5 WB SSB
250.38 m3
83 m3
No4 WB SSB
230.75 m3
76 m3
No3 WB SSB
170.48 m3
56 m3
No2 WB SPS
93.07 m3
31 m3
No1 WB DBSB
204.31 m3
68m3
No1 WB DBPS
148.27 m3
49 m3
No4 WB DBPS
277.84 m3
92 m3
No2 WB DB PS438 m3
146 m3
No3 WB DB PS533.36 m3
177 m3
No2 WB SSB
148.44 m3
49 m3
No4 WB DBSB
277.84 m3
92 m3
No2 WB DB PS438 m3
146 m3
No3 WB DB SB533.36 m3
177 m3
No1 WB SPS
61.21 m3
20 m3
No1 WB SBS
86.28 m3
28 m3
Fore PeakTk
325.44 m3
108 m30
-1
-2
-3
-4
-5
5
4
3
2
1
Draft AFT
0,00 m
Draft MID P
0,00 m
Draft MID S
0,00 m
0,00 Bar
BWV 04
BWV13
BWV11
BWV14
BWV129
BWV127
BWV126
BWV117
BWV115
BWV113
BWV107
BWV105 BTHR
&EM
Fi PpRoom
BWV109
BWV108
BWV125
BWV123
BWV 111
BWV 110
BWV120
FiFiSYSTEM
BWV 119BWV101
BWV102
BWV128
BWV116
BWV114
BWV112
BWV106
BWV104
BWV124
BWV122
BWV12
0%
Set Pos.
BWV 17
0%
No2BALLAST WATER
TREATMENT
0%
20%
40%
60%
80%
100%
BWV 09
0%
Auto On
Pset
No.2 BP
0,00 Bar
Auto On
BA
0,00 Bar
0,00bar
0,00bar
0,00 Bar
0,00bar
0,00bar
Trim
0,00 m
Seawater dens.
0,000 kg/l
List0,0 deg
16 17
DRAUGHT MEASUREMENTHoppe Marine Draught Measurement solutions monitor the draught of the vessel and determine draught values precisely at perpendiculars and draught marks.
The standard Draught Measurement system configu- ration includes four measuring points with pressure sensors, located at bow, stern, mid ship port and mid ship starboard.
The hydrostatic pressure sensors HCG 2011 and HCG 4011 have been especially developed to detect
the levels in a wide range of liquids with different media properties. The pressure sensors of the HCG series can be configurated to the required measuring range, housing material and process adaptor.
The pressure sensor HCG 2011 provides a signal of 4 – 20 mA and allows customised measuring ranges, adjustable via HART protocol. The pressure sensor HCG 4011 is designed with a digital serial BUS interface, which allows cost saving cable loop installations.
KEY FEATURES
• Precise draught calculation at perpendicular and draught marks
• Trim and heel, sagging and hogging information • Significant installation cost savings by smart welding block arrangements
• Reliable and accurate in house designed sensors • Experience on more than 2,800 vessels worldwide • Made in Germany with competitive market price • Approved by major classification societies
COMPONENTS
Hydrostatic pressure sensors HCG • HCG 2011 analogue type, 4 – 20 mA • HCG 4011 digital BUS type • Stainless steel powder coated or titanium housing • Titanium membrane
Solid class approved welding block unit including sensors
PLC unit HOMIP for draught calculation • 6” touch screen • Including trim, list and density correction • Interfaces to Hoppe or 3rd party systems
The PLC unit HOMIP with a 6” touch screen for draught calculation.
F1 F2 F3 F4
Draught measurement
9.50 m
Log
9.22 m
9.22 m
-0.96 m0.0 ° more…
Trim DMList
Mid SB
Mid PS
AFT8.84 m
Fwd
18 19
DYNAMIC DRAUGHT MEASUREMENTHoppe Marine Dynamic Draught Measurement solutions monitor the draught of the vessel and determine the draught values precisely at perpendiculars and draught marks during vessel voyage.
The standard Dynamic Draught Measurement system configuration includes four measuring points with
pressure sensors, located at bow, stern, mid ship port and mid ship starboard and two inertial measuring unit HOSIM.
The system delivers precise values unaffected of hydrodynamic effects during vessel voyage.
KEY FEATURES
• Precise draught calculation at perpendicular and draught marks during vessel voyage
• Trim and heel, sagging and hogging information • Reliable and accurate in house designed sensors • Made in Germany with competitive market price • Upgrade possibilities to Dynamic Floating Monitoring • Valuable data for vessel performance monitoring systems
COMPONENTS
Hydrostatic pressure sensors HCG • HCG 2011 analogue type, 4 – 20 mA • HCG 4011 digital BUS type • Stainless steel powder coated or titanium housing • Titanium membrane
Solid class approved welding block unit including sensors
Precise inertial measuring unit HOSIM for vessels movement and floating condition
PLC unit HOMIP for draught calculation • 6” touch screen • Including trim, list and density correction • Interfaces to Hoppe or 3rd party systems
The PLC unit HOMIP with a 6“ Touch screen for dynamic draught calculation.
HOSIM 2
HOSIM 2
Draught Unit
F1 F2 F3 F4
Draught measurement
9.50 m
Log
9.22 m
9.22 m
-0.96 m0.0 ° more…
Trim DMList
Mid SB
Mid PS
AFT8.84 m
Fwd
21
SENSOR TOOLBOX HOSETKEY FEATURES
• Adhoc replacement of defective sensors on board • Cost reduction by preventing dead stock on board • Avoidance of unnecessary spare part orders • Reduced service costs by self troubleshooting on board • Calibration of pressure sensors zero point • Sensor monitoring and lifetime analysis • Designed for easy handling and operation
COMPONENTS
Sensor Toolbox HOSET • Test unit with display for calibration and HART modem connection
• Pump station for sensor test and calibration • Tools for process adapter replacement • Standard spare pressure sensors type HCG 2011/MO4 • Separate process adapters • Safe storage box IP 65
Software for automized parametrization and zero point adjustment
HOSET 2.0H03
HOSET 2.0
HART-ModemSensor
0,2
0,1
0
0,30,4
0,5
0,6
Hoppe Sensor Toolbox HOSET supports maintenance, servi-cing, calibration and instant sensor replacement of Hoppe pressure sensors type HCG 2011/MO4. It helps to keep the Tank Content Measurement system in proper operation at all time. The design ensures easy handling and operation.
HOSET includes a software and HART-modem (Highway Addressable Remote Transducer), which allow an
automized parameterization of the standard spare sensors as well as sensor zero point calibration.
The software includes all tank data to ensure failure free parameterization of sensors. After parameterization tank and sensor data shall be send to Hoppe head office to ensure comprehensive lifetime data analysis.
HOSET 2.0
HART-ModemSensor
0
0,1
0,20,3
0,4
0,5
0,6bar Cl. 1.6
Pumpstation of Sensor Toolbox HOSET
20 21
22 23
HOPPE SYSTEMS AND COMPONENTSHOPPE SYSTEMSAND COMPONENTS
Electronic Devices Valve-Actuator-Combinations Motion SensorsHeel Control and
Trim units Level SensorsPower and
Performance Meter
PLC
unit
HO
MIP
I/O
Mod
ules
HO
PAC
(pne
umat
ic)
HO
HAC
(hyd
raul
ic)
HO
HEA
(e
lect
ro h
ydra
ulic
)
elec
tric
Incl
inat
ion
Sens
or
Elec
tron
ic In
clin
omet
er
Iner
tial M
easu
ring
unit
HO
SIM
2
GPS
Sen
sor
Reve
rsib
le
prop
elle
r pum
p
Blow
er u
nit
HCG
2011
(ele
ctric
)
HCG
401
1(e
lect
ric B
US)
HO
BUB
(pne
umat
ic)
Shaf
t Pow
er M
eter
Fuel
Cou
nter
Flui
d M
anag
emen
t
Valve Remote Control · · · · · ·Tank Content Measurement · · · · · ·Ballast Management · · · · · · · · · ·Bunker Management · · · · · · ·Draught Measurement · · · · · ·Dynamic Draught Measurement · · · · · · · ·
Mot
ion
Con
trol
Heel Control · · · · · · · · · · · ·Trim Control · · · · · · · · · · · ·FLUME® Roll Damping · · · · · · · ·U-Tank Roll Damping · · · · · · · ·Load Moment Control · · · · · · · · · · · ·Dock Control · · · · · · · · · · · · · ·
Ship
Per
form
ance
Maihak Shaft Power Meter · · ·Fuel Consumption Measurement · · · ·Trim and Motion Measurement · · ·Performance Monitoring · · · · · · · ·
Load PowerRPM
20347 kW78.0 rpm
Heavy run conditions for
History Load
45.2 %
10:24:13
2491 kNm
0 s
1.62 %Load %
Heavy Run Light Run
n [%]
100
50
00 20 40 60 80 100 120
LoadTorque
ME
F1 F2 F3 F4
+Y -Y+X
-X
Inclinometer Motion PerformanceHeel AngleMax Ampl. PORTRoll Period
PORT-
STBD+
-6.5°-14.7°
4.3s
Peak to PeakMax Ampl. STBDMax Peak t. Peak
14.1°14.6°29.2°
0
015
30
45 45
30
15
5 5
F1 F2 F3 F4
24 25
COMPACT OVERVIEWCOMPACT OVERVIEW
Fluid Management • Valve Remote Control • Tank Content
Measurement • Bunker Management • Ballast Water
Management • Draught Measurement • Dynamic Draught
Measurement • Sensor Toolbox HOSET
Ship Performance • Maihak Shaft
Power Meter • Fuel Consumption
Measurement • Dynamic Draught,
Trim and Motion Measurement
• Performance Monitoring
• Fleet Data Quality • Analysis Catalog
Ship Services • Technical Support • Spare Parts • On Board Service • Retrofit • Service 4.0 • Predictive Maintenance
and Self-Validation • Fleet Data Quality • Analysis Catalog • Hoppe Global
Service Points
Motion Control • Heel Control • Trim Control • Roll Damping • Load Moment Control • Dock Control • Tailored Control
Systems • Monitoring • Engineering Service
FLUID MANAGEMENTValve Remote Control • Tank Content Measurement • Bunker Management
Ballast Water Management • Draught Measurement Dynamic Draught Measurement • Sensor Toolbox HOSET
SHIP PERFORMANCE
www.hoppe-marine.com
Maihak Shaft Power Meter • Fuel Consumption Measurement Dynamic Draught, Trim and Motion Measurement • Performance Monitoring
Fleet Data Quality • Analysis Catalog
MOTION CONTROLHeel Control • Trim Control • Roll Damping • Load Moment Control • Dock Control
Tailored Control Systems • Monitoring • Engineering Service
SHIP SERVICES
www.hoppe-marine.com
Technical Support • Spare Parts • On Board Service • Retrofit • Service 4.0 Predictive Maintenance and Self-Validation • Fleet Data Quality • Analysis Catalog
Hoppe Global Service Points
CONTACT
Germany Hoppe Marine GmbH Kieler Straße 318 22525 Hamburg
Tel. +49 (0)40 561 949 - [email protected]
China Hoppe China Co., Ltd. German Center, Room 708, Tower 1, 88 Keyuan Road 201203 Shanghai Pudong
Tel. +86 21 50 278 040 [email protected]
Singapore Hoppe Singapore Pte., Ltd. 18 Boon Lay Way # 04-93 609966 Singapore
Tel. +65 67 17 48 88 [email protected]
Republic of Korea Hoppe Korea Co., Ltd. No 485-3, Gu Pyeong-Dong, Sa Ha-Gu 604-866 Busan
Tel. +82 51 4 035 851 [email protected]