Date post: | 07-Feb-2018 |
Category: |
Documents |
Upload: | phunghuong |
View: | 214 times |
Download: | 0 times |
auta comunicaciones, s.l. le presenta su gama compact.
Avalados por la experiencia acumulada en ms de 30 aos,
diseando y fabricando productos con las soluciones ms
avanzadas. Equipos que por su calidad, tecnologa y diseo,
son adaptables a cualquier ambiente, cubriendo totalmente
sus necesidades y proporcionando un alto nivel de confort
en cualquier entorno.
Desde el simple portero electrnico para casas unifamiliares,
a la ms sofisticada instalacin en grandes edificios o
urbanizaciones, ahorrando materiales y tiempo de montaje,
mediante la tecnologa digital.
La gama compact supone un paso adelante en la bsqueda
por satisfacer las exigencias tanto del instalador y del
distribuidor, como del profesional de la construccin y del
usuario final de la vivienda.
auta comunicaciones, s.l. is very pleased to introduce
to you its whole new auta decor range composed by new
designs including external panels, monitors as well as
internal phones.
We have over thirty years experience in designing and
manufacturing door and video door entry systems, during
which time we have always looked for the most advanced
solutions. Our equipment, wich, due to its quality,
technology, performance and design is adaptable to any
environment, covering its necessities in its entirety and
providing a high comfort level at any surrounding.
We are talking about a digital technology able to resolve
any type of installation,from the simple door entry
system for detached houses to the most sophisticated
installation at wide buildings or housing developments
including multiple entrances, saving material cost and
installation time.
The whole new auta decor range takes an important step
forward in the search to totally satisfy the exigences of
the installers, the professionals of the buildings industry
as well as the final user.
AUDIO y VIDEO COMPACT DIGITAL/AUDIO and VIDEO DIGITAL COMPACTAUDIO. MATERIAL y FUNCIONAMIENTO/AUDIO. MATERIAL and FUNCTIONING 4VIDEO. MATERIAL y FUNCIONAMIENTO/VIDEO. MATERIAL and FUNCTIONING 5 - CONEXIN DE UNA PLACA DE PULSADORES/PUSHBUTTON PANEL CONNECTION 6SISTEMA TECLADO. MATERIAL y FUNCIONAMIENTO/KEYPAD SYSTEM. MATERIAL and FUNCTIONING 7SISTEMA SDL. MATERIAL y FUNCIONAMIENTO/ SDL SYSTEM. MATERIAL and FUNCTIONING 8SDL SYSTEM.MATERIAL and FUNCTIONING 9MON. y TF COMPACT DIGITAL. FUNCIONAMIENTO/MON. and PH. DIGITAL COMPACT. FUNCTIONIG 10 - CONFIGURACION/CONFIGURATION 11 - PLANTILLA DE CODIGOS (PLACAS DE PULSADORES)/CODES PATTERN (PUSHBUTTON PANELS) 12 - CDIGOS 1-254. (PLACAS DE TECLADO y SDL)/CODES 1-254 (KEYPAD PANEL and SDL) 13
ESQUEMAS DE INSTALACIN/WIRING DIAGRAMSAUDIO: KIT S1 (UN ACC. y HASTA 16 ACC.)/S1 KIT (ONE ACC. and UP TO 16 ACC.) 14
UN ACCESO y HASTA 16 ACC./ONE ACC. and UP TO 16 ACC. 15 1 ACC. GEN. y HASTA 15 SEC./1 OUTER KEYPAD ACC. and UP TO 15 INNER ACC. 16
SDL. 1 ACC. EXT. y HASTA 254 INT./SDL. 1 EXT. ACC. and UP TO 254 INT. ACC. 17SDL. 2 ACC. EXT. y HASTA 254 INT./SDL. 2 EXT. ACC. and UP TO 254 INT. ACC. 18
C.C.I. 19VIDEO COAX: KIT S1 (1 ACC. HASTA 16 ACC.(SERIE))/S1 KIT (1 ACC. & UP TO 16 ACC.(CASCADE)) 20
KIT S1 (1 ACC. HASTA 16 ACC.(ESTRELLA))/S1 KIT (1 ACC. & UP TO 16 ACC.(STAR)) 21UN ACCESO/ONE ACCES 22
DOS ACCESOS F y FV/TWO ACCESSES A and AV 22DOS ACC. (HASTA 16 ACC. (SERIE))/TWO ACC. (UP TO 16 ACC. (CASCADE)) 23DOS ACC. (HASTA 16 ACC. (ESTRELLA))/TWO ACC. (UP TO 16 ACC. (STAR)) 231 ACC. GEN. VIDEO y 2 SECUND. AUDIO/1 OUTER VIDEO ACC. & 2 INNER AUDIO ACC. 241 ACC. GEN. Y 4 SECUNDARIOS/1 OUTER ACC. and 4 INNER ACCESSES 25
SDL. 1 ACC. EXT. y HASTA 254 INT./SDL. 1 EXT. ACC. and UP TO 254 INT. ACC. 26SDL. 2 ACC. EXT. y HASTA 254 INT./SDL. 2 EXT. ACC. and UP TO 254 INT. ACC. 27
DISTRIBUCION VIDEO. (POR PLANTA)/VIDEO DISTRIBUTION (PER FLOOR) 28DISTRIBUCION VIDEO. (CASCADA)/VIDEO DISTRIBUTION (CASCADE) 29C.C.I. 30INST. CAMARA AUX Y ABREP. AUX/AUX. CAMERA and DOOR RELEASE INST. 31
VIDEO NO-COAX: MISMO ORDEN QUE EL SISTEMA COAX 32, 33, 34, 35, 36, 37, 38, 39, 40 41, 42 y 43SAME WAY LIKE COAX SYSTEM 32, 33, 34, 35, 36, 37, 38, 39, 40
41, 42 and 43
VISUALTECH MISMO ORDEN QUE EL SISTEMA COAX (SIN SDL) 44, 45, 46, 47, 48, 49, 50, 51, 52,53 y 54
SAME WAY LIKE COAX SYSTEM (NO SDL) 44, 45, 46, 47, 48, 49,
50, 51, 52, 53 and 54
ALIMENTACIN/POWER SUPPLY DISTRIBUCIN DE ALIMENTADORES 55
POWER SUPPLY UNIT DISTRIBUTIONACCESORIOS/ACCESSORIES REL AUXILIAR 24V, TIMBRE AUXILIAR DIGITAL Y TIMBRE INALMBRICO 56 24Vcc AUXILIARY RELAY, AUXILIARY BELL and WIRELESS BELL INSTALACION CAMARA AUXILIAR 57 AUXILIARY CAMERA INSTALLATION
Tecl
ado
Vide
o -
Fon
aIN
DIC
E/IN
DEX
AUDIO UN ACCESO/ONE ACCES 58 DOS ACCESOS/TWO ACCESSES 59
ACCESORIOS/ACCESSORIES
RELE AUXILIAR, RELE ELECTRONICO, OSCILADOR/ZUMBADOR SUPLETORIO Y TIMBRE INALAMBRICO 60 AUXILIARY RELAY, ELECTRONICAL RELAY, WIRELESS BELL
SOLUCION DE PROBLEMAS. SISTEMA DIGITAL 61F.A.Q. DIGITAL SYSTEM 62
SOLUCION DE PROBLEMAS. SISTEMA ANALOGICO 63
F.A.Q. ANALOG SYSTEM 64
IND
ICE/
IND
EX
4 2
4
4
4
2
220 Vac
4
2 AbrepuertasDoor Opener
4 2
4
4
4
2
220 Vac
4
ALIMENTADORPOWER SUPPLY
TF. COMPACTDIGITALDIGITAL COMPACT PH.
TF. COMPACTDIGITALDIGITAL COMPACT PH.
ALIMENTADORPOWER SUPPLY
AbrepuertasDoor Opener
220 Vac
2
ATF-12
2
DIG
ITA
L
4
Port
ero
elec
trn
ico
Tecl
ado
Vide
o -
Fon
aAU
DIO
4
1 ACCESO1 ACCES
2 ACCESOS2 ACCESES
Material y funcionamiento/Material and Functioning
Relacin de Material/List of Materials
COMPONENTES NOMBRE UNIDADES REF.COMPONENTS NAME UNITS
-Telfono Tf. compact DIGITAL (1) 700105 Phone Compact DIGITAL Ph. -Placa Placa DIGITAL (2) 6***** Panel DIGITAL Panel -Caja de empotrar Caja empotrar (2) 50902* Mounting Box Mounting Box -Alimentador ATF-98 (1) 715103 Power Supply Unit ALV - 3.5A (1) 715403 -Alimentador aux. ATF-12 (1) 715203 Aux. Power Supply -Mdulo de control Mdulo de control (1) 600005 Control Module Control Module -Md. filas columnas Md. filas columnas (1) 600002 Rows & Columns Mod. Rows & Columns Mod. -Abrepuertas Abrepuertas (1) 720001 Door Opener Door Opener
(1) Unidades segn instalacin
Units depending on installation
(2) Ver mod., serie y ref. de la placa de calles
See references on catalogue
(3)
Funcionamiento/Functionig
Llamada desde la placa de calle
La llamada en el sistema digital se realiza en dos fases:
1 FASE: Al presionar el pulsador, la placa emite un tono de confirmacin durante el tiempo que lo tengamos presionado.
2 FASE: Al soltar el pulsador se enva el cdigo correspondiente y el telfono genera tonos de llamada durante
un tiempo max. de 30 seg.
En el caso de haber ms de un acceso, estos quedan bloqueados iluminndose en la placa el piloto de "lnea ocupada".
Cabe la posibilidad de rectificar una llamada presionando el pulsador de otra vivienda.
Establecimiento de la comunicacin
Si durante la fase de llamada levantamos el brazo telefnico estableceremos la comunicacin, iluminndose un piloto que nos indica "lnea ocupada" tambin en esta placa.
Durante la comunicacin podremos accionar el abrepuertas del acceso con el que estamos estableciendo la comunicacin, presionando la tecla correspondiente del telfono.
(El programa acciona el abrepuertas durante 2 seg.)
La comunicacin terminar al colgar el brazo telefnico o transcurrir ms de 1 m 30 seg. En ambos casos se apagarn los pilotos de "lnea ocupada" en los telfonos yplacas de calle.
*The power supply unit ALV-DIGITAL 3.5A does not give A/Ccurrent (R-C). So it has to be installed with and ATF-12 powersupply unit to release the electrical strike & to light the cardholder
ATF-98 10
MAX. MAX.
20ALV-3.5A + ATF-12* 4080
*El ALV-3.5A no suministra corriente alterna(R-C) por lo que se debe instalar junto a un ATF-12 paraaccionar el abrepuertas y la iluminacin de los tarjeteros.
Call from the outdoor panel
In the digital system the call is done in 2 phases:
1st phase: Pressing the push-button the panel delivers a confirmation tone.
2nd phase: Releasing the push-button the code is transmitted and the corresponding phone would ring 4 times during 30 seconds.
Traffic LED on the panel. Red LED means line engaged.
The call can be readdressed by pressing another push-button.
Picking up the phone's handset the communication starts. Red LED on the panels means line engaged.
Pressing the door release button at the phone the door will be released.
Communication will be finished by hanging up the hanset or after 90 seconds.
Remark:
The electrical strike is activated by 2 second impulses.
Esquemas Unifilares/Schematic Representation
HASTA/UP TO100 M.
SECCIONESW. SECTIONS
HASTA/UP TO200 M.
Alim. SEPARADASEPARATE Supply( (
EL CABLEADO NO DEBE PASAR CERCA DE LA LINEA ELCTRICATHE WIRING MUST NOT BE RUN CLOSE TO THE ELECTRICAL LINE
1.5 mm (AWG15)1 mm (AWG17)
0.5 mm (AWG20) 1 mm (AWG17)
220 Vac
4 2
3
1
2
220 Vac
1
AbrepuertasDoor Opener
ALIMENTADORPOWER SUPPLY
MONITOR COMPACT DIGITALDIGITAL COMPACT MONITOR
DIG
ITA
L
5
vide
opor
tero
Tecl
ado
Vide
oTe
clad
o Vi
deo
- Fo
na
Tecl
ado
Vide
oVI
DEO
DIG
ITA
L
5
1 ACCESO1 ACCES
2 ACCESOS2 ACCESES
COAXIAL
COAXIALDVC-4S
Material y funcionamiento/Material and Functioning
ESTADOS DEL MONITOR
Apagado: Conmutador de ON/OFF en posicin OFF. El indicador luminoso permanece apagado
Operativo: Conmutador de ON/OFF en posicin ON. El indicador luminoso permanece encendido, de color verde y de manera tenue.
Estado Lnea Ocupada: El indicador luminoso permanece encendido, de color rojo y de manera tenue, indicando que el sistema se encuentra ocupado por una llamada aotra vivienda. Una vez finalizada esta llamada, el monitor vuelve al estado operativo.
LLAMADA. Cuando el monitor recibe una llamada desde la placa, parpadea el indicador luminoso, suena el tono de aviso y se enciende la pantalla para poder observar ala persona que la realiz sin que esta lo advierta. En esta fase se puede cortar la llamada presionando el pulsador ( )
Para establecer una comunicacin de audio, descolgar el brazo telefnico. La duracin mxima de la comunicacin es de 1m 30s
En caso de no descolgar en 30s, cesar el tono de aviso y se apagar la pantalla.
Durante la fase de llamada se puede accionar el abre-puertas ( ) en cualquier momento.
*Monitor auxiliar: En caso de tener un monitor auxiliar, en ste sonar la llamada pero no aparecer video hasta que descuelgue o pulse ( )
AUTOENCENDIDO. Se puede activar y volver a desactivar el vdeo del monitor con la placa sin haber recibido una llamada, pulsando autoencendido ( ).
Durante la fase de autoencendido se puede accionar el abre-puertas ( ) en cualquier momento.
Esta funcin solo ser posible en caso de estar habilitado el autoencendido tanto en la placa de calle como en el monitor.
LLAMADA A CENTRAL. En caso de existir una central de conserjera, se podr establecer una comunicacin de audio con la misma desde el monitor, con una duracinmxima de 1m 30s. Para realizar esta funcin se debe descolgar el brazo telefnico y presionar el pulsador de abrepuertas/llamada a central( ).
Relacin de Material/List of Materials
Funcionamiento/Functioning
Esquemas Unifilares/Schematic Representation
COMPONENTES NOMBRE UNIDADES REF.COMPONENTS NAME UNITS
-Monitor M. compact DIGITAL (1) 702005 Monitor Compact DIGITAL M. -Distribuidor Video DV-4S (1) 750498 Video Distributor DV-4S -Mod. Conex. DIGITAL Mod. Conex. COMPACT DIG. (1) 750299 DIGITAL Bracket DIG. COMPACT bracket -Placa Placa DIGITAL (2) 6***** Panel DIGITAL Panel -Mod. F/V COMPACT Dig. MFV COMPACT DIGITAL (1) DIG. F/V COMPACT Mod. DIGITAL COMPACT MFV -Caja de empotrar Caja empotrar (2) 50902* Mounting Box Mounting Box -Alimentador ATF-98 (1) 715103 Power Supply Unit ALV - 3.5A (1) 715403 -Alimentador aux. ATF-12 (1) 715203 Aux. Power Supply -Mdulo de control Mdulo de control (1) 600005 Control Module Control Module -Md. filas columnas Md. filas columnas (1) 600002 Rows & Columns Mod. Rows & Columns Mod. -Abrepuertas Abrepuertas (1) 720001
(1) Unidades segn instalacin
Units depending on installation
(2) Ver mod., serie y ref. de la placa de calles
See references on catalogue
(3)
*The power supply unit ALV-DIGITAL 3.5A does not give A/Ccurrent (R-C). So it has to be installed with and ATF-12 powersupply unit to release the electrical strike & to light the cardholder
ATF-98 10
MAX. MAX.
20ALV-3.5A + ATF-12* 4080
*El ALV-3.5A no suministra corriente alterna(R-C) por lo que se debe instalar junto a un ATF-12 paraaccionar el abrepuertas y la iluminacin de los tarjeteros.
Call from the outdoor panel
In the digital system the call is done in 2 phases:
1st phase: Pressing the push-button the panel deivers a confirmation tone.
2nd phase: Releasing the push-button the code is transmited and the corresponding phone would ring 4 times during 30 seconds.
Traffic LED on the panel. Green LED means STANDBY state, green LED flashing means calling incoming and Red LED means line engaged.
Call
The screen light ON when a call is recived on the monitor. The monitor would ring 4 times during 30 seconds, after the 30 seconds the monitor would turn off.
The comunication can be cancelled by pressing ( ). Lift the hanset up to get audio.
To release the door press ( )
Auxiliary Monitor
The auxiliary monitor will not get picture but when lift up the handset or doing self-starting.
Self-Starting
Video; press ( ) button, there is no need to lift the handset up.
Audio - Video
Lift the handset up and press ( ) button. Communication time is 90 seconds.
Call to guard porter
Lift the handset up and press ( ) button. Communication time is 90 seconds.
3
4 2 2
2
3
1
2
220 Vac
3
ATF-12
2
MONITOR COMPACT DIGITALDIGITAL COMPACT MONITOR
1
4ALIMENTADORPOWER SUPPLY
AbrepuertasDoor Opener
AbrepuertasDoor Opener
COAXIAL
COAXIALDVC-4S
COAXIAL
HASTA/UP TO100 M.
SECCIONESW. SECTIONS
HASTA/UP TO200 M.
Alim. SEPARADASEPARATE Supply( (
EL CABLEADO NO DEBE PASAR CERCA DE LA LINEA ELCTRICATHE WIRING MUST NOT BE RUN CLOSE TO THE ELECTRICAL LINE
1.5 mm (AWG15)1 mm (AWG17)
0.5 mm (AWG20) 1 mm (AWG17)
Conexin de una placa digital de pulsadores/Digital pannel connection
Example of an audio digital panel connection. The video panel is connected at the same way.
We can connect 3 panels max. (66 push-buttons), over thas we have to use a KEYPAD PANEL.
The Rows & Colums module is NOT needed when we are connecting only 1 panel.
DIG
ITAL
AUDIO
/VID
EO
6
Ejemplo de conexion placas digitales COMPACT. En este ejemplo aparecen con la configuracion de dos placas, se pueden colocar hastatres en el mismo acceso. Si se instala unicamente una placa se ha de prescindir del modulo de filas y columnas y conectar directamentelos latiguillos de placa al modulo de control.
J4
J4
PLACA DE KIT S2S2 KIT PANEL
1 PLACA 1 PANEL
Si hubiese una tercera placase conectaria aquiPlace to connect the 3 panel
J6
C1C6 ....
1 PLACA 1 PANEL
220 Vac
4 2
4
4
4
2
4
ALIMENTADORPOWER SUPPLY
TF. COMPACTDIGITALDIGITAL COMPACT PH.
AbrepuertasDoor Opener
4 2
3
2
220 Vac
1
ALIMENTADORPOWER SUPPLY
AbrepuertasDoor Opener
MONITOR COMPACT DIGITALDIGITAL COMPACT MONITOR
Material y funcionamiento/Material and Functioning
Relacin de Material/List of Materials
Funcionamiento/FunctioningLlamada desde la placa de calle
Para realizar la llamada a una vivienda deberemos teclear el cdigo de la vivienda y pulsar campana , seguidamente la placa envia el cdigo correspondiente y el telfonoo monitor genera el tono de llamada durante un tiempo max. de 30 seg., en la placa aparece el mensaje "*LLAMANDO* NUEVO COD _ _ _".En caso de error al introducir el cdigo de la vivienda se puede rectificar pulsando la tecla C y repitiendo el proceso.
Establecimiento de la comunicacinSi durante la fase de llamada levantamos el brazo telefnico estableceremos la comunicacin, en la placa de teclado aparecer el mensaje "COMUNICACIN ESTABLECIDA".Durante la comunicacin podremos accionar el abrepuertas del acceso presionando la tecla correspondiente del telfono o monitor.
La comunicacin terminar al colgar el brazo telefnico o transcurrir ms de 1 m 30 seg. En ambos casos desaparecer el
mensaje de "COMUNICACION ESTABLECIDA", aparecer el mensaje "FIN DE LA LLAMADA" y a continuacin el mensaje"INTRODUCIR COD _ _ _"
Funcin del abrepuertas en la placa.Para realizar el accionamiento del abrepuertas mediante el teclado de la placa proceder como se describe seguidamente:
1.- Pulsar y a continuacin introducir el cdigo de cuatro dgitos para la apertura(El cod. por defecto es 0000).
2.- Pulsar de nuevo y se accionar el abrepuertas.
Personalizar el cod. de abrepuertas.Para realizar el accionamiento del abrepuertas mediante le teclado de la placa se proceder como se describe seguidamente:
1.- Pulsar e introducir el cdigo 1664, pulsar .
2.- En la placa aparece el mensaje "ANTIGUO CODIGO _ _ _ _", teclear el cod. antiguo y pulsar .3.- A continuacin aparece el mensaje "NUEVO CODIGO _ _ _ _", teclear el cdigo nuevo y pulsar . El cod. ya est cambiado.
Esquemas Unifilares/Schematic Representation
(1) Unidades segn instalacin
Units depending on installation
(2) Ver mod., serie y ref. de la placa de calles
See references on catalogue
(3)
*The power supply unit ALV-DIGITAL 3.5A does not give A/Ccurrent (R-C). So it has to be installed with and ATF-12 powersupply unit to release the electrical strike & to light the cardholder
ATF-98 10
MAX. MAX.
20ALV-3.5A + ATF-12* 4080
*El ALV-3.5A no suministra corriente alterna(R-C) por lo que se debe instalar junto a un ATF-12 paraaccionar el abrepuertas y la iluminacin de los tarjeteros.
COMPONENTES NOMBRE UNIDADES REF.COMPONENTS NAME UNITS
-Monitor M. compact DIGITAL (1) 702005 Monitor Compact DIGITAL M. -Distribuidor Video DV-4S (1) 750498 Video Distributor DV-4S -Mod. Conex. DIGITAL Mod. Conex. COMPACT DIG. (1) 750299 DIGITAL Bracket DIG. COMPACT bracket -Placa Placa DIGITAL TECLADO (2) 6***** Panel KEYPAD DIGITAL Panel -Mod. F/V COMPACT Dig. MFV COMPACT DIGITAL (1) DIG. F/V COMPACT Mod. DIGITAL COMPACT MFV -Caja de empotrar Caja empotrar (2) 50902* Mounting Box Mounting Box -Alimentador ATF-98 (1) 715103 Power Supply Unit ALV - 3.5A (1) 715403 -Alimentador aux. ATF-12 (1) 715203 Aux. Power Supply -Mdulo de control Mdulo de control (1) 600005 Control Module Control Module -Md. filas columnas Md. filas columnas (1) 600002 Rows & Columns Mod. Rows & Columns Mod. -Abrepuertas Abrepuertas (1) 720001
Call
In the digital system the call is done in 2 phases:
1st phase: Dial the flat number on the keypad and press
2nd phase: The flat number code is transmited and the corresponding phone would ring 4 times during 30 seconds. The message *CALLING* NEW CODE_ _ _ is showed up onthe panel.
The call can be readdressed by repeating 1st phase.
The call can be cancelled by pressing C key.
Communication
Picking up the hanset, the communication starts. The LCD screen would show the message COMMUNICATION ESTABLISHED.
Pressing the door release button at phone, the door will be released.
Communication will be finish by hanging up the hanset or after 90 seconds. The LCD screen will show the message END OF CALL, then the message INTRODUCE CODE_ _ _will be show again.
Remark:
The electrical strike is activated by 2 seconds impulses.
Door opener function on the panel
The door release can be released from the panels keypad:
1st phase: Push and dial the code 0000 (code from factory).
2nd phase: Push again, the door will be released.
How to modify the door release code
1st phase: Push and dial the code 1664, then push again.
2nd phase: The panel will show you the message OLD CODE_ _ _. Dial the old code (0000 if is the first time the code is modified) and push .
HASTA/UP TO100 M.
SECCIONESW. SECTIONS
HASTA/UP TO200 M.
Alim. SEPARADASEPARATE Supply( (
EL CABLEADO NO DEBE PASAR CERCA DE LA LINEA ELCTRICATHE WIRING MUST NOT BE RUN CLOSE TO THE ELECTRICAL LINE
1.5 mm (AWG15)1 mm (AWG17)
0.5 mm (AWG20) 1 mm (AWG17)
31
DIG
ITA
L
7
Port
ero
tecl
ado
DIG
ITA
L
7
TECL
AD
O/K
EYPA
D
654
1 2 3
7 8 9
C 0
1 ACCESO F1 ACCES A
COAXIAL
COAXIAL
654
1 2 3
7 8 9
C 0
1 ACCESO FV1 ACCES AV
Material y funcionamiento/Material and Functioning
Relacin de Material
COMPONENTES NOMBRE UNIDADES REF.
Acceso Principal PD DIGITAL teclado (1) 6*****Mdulo de control Mdulo de control SDL (1) 600007
Accesos interiores PD DIGITAL (1)(2) 6*****Mdulo de control Mdulo de control (1)(2) 60000*Md. filas columnas Md. filas columnas (1) 600002Caja de empotrar Caja empotrar (1)(2) 50902*Selector lneas SDL (1) 730121
Telfono Telfono compact digital (1) 700105Monitor Monitor compact digital (1) 750105
Distribuidor vdeo DVC-4S (1) 750498Alimentador (3) (3) (3)Abrepuertas Abrepuertas (1) 720001
Funcionamiento
CARACTERISTICAS.-El SDL (Selector Digital de Lneas) permite comunicar desde varios accesos comunes exteriores con uno de los edificios interiores,de forma que no afecta al resto de edificios, que pueden mantener su comunicacin de forma simultnea e independiente.
Cada uno de los edificios interiores, puede direccionar un mximo de 254 viviendas y disponer hasta de 15 accesos independientes.
Mediante el SDL podemos por tanto, comunicar desde los accesos exteriores hasta con 254 chalets o viviendas adosadas, con 254edificios de 254 apartamentos cada uno, o una combinacin de ambos.
FUNCIONAMIENTO.-Llamada desde la placa exterior.-
La llamada en el sistema se realiza en tres fases:
1 FASE: Teclear el cdigo del edificio y pulsar campana . En el display aparece "INTRODUZCA COD. VIVIENDA _ _ _"2 FASE: Teclear el cdigo de la vivienda y pulsar campana . (Si a los 10s de haber introducido el cdigo de edificio no introducimos el de vivienda, la placa vuelve a su estado inicial.)
3FASE: La placa enva el cdigo correspondiente y el telfono o monitor genera tonos de llamada en intervalos durante
un tiempo max. de 30 seg. y en la placa aparece el mensaje "*LLAMANDO* C=CANCELAR".En caso de error al introducir el cdigo de la vivienda se puede rectificar pulsando la tecla C y repitiendo la 1 y la 2 fase.Si la vivienda a la que estamos llamando est ocupada, aparecer un mensaje de "*LINEA OCUPADA*" y volver a su estado inicial.
Establecimiento de la comunicacin desde la placa exteriorSi durante la fase de llamada levantamos el brazo telefnico estableceremos la comunicacin. En la placa de teclado aparecer
el mensaje "COMUNICACIN ESTABLECIDA".Durante la comunicacin podremos accionar el abrepuertas del acceso presionando la tecla correspondiente del telfono o monitor.
La comunicacin terminar al colgar el brazo telefnico o transcurridos 1 m 30 seg. En ambos casos desaparecer el
mensaje de "COMUNICACION ESTABLECIDA", aparecer el mensaje "FIN DE LA LLAMADA" y a continuacin el mensaje"INTRODUZCA COD. EDIFICIO _ _ _".
Llamada y establecimiento de la comunicacin desde las placas interiores.-Las placas utilizadas en los accesos interiores son estandar, tanto de pulsadores como de teclado, y su funcionamiento y codificacines el mismo que en una instalacin individual.
Cuando se establece una comunicacin entre un acceso exterior y un edificio interior, la placa del edificio permanecer bloqueadaen estado de lnea ocupada ( Led rojo en Placa Pulsador - Display en Placa Teclado).
Cdigo de acceso.-La funcin del abrepuertas mediante un cdigo desde la placa se realiza en dos fases:
1.- Pulsar y a continuacin introducir el cdigo de cuatro dgitos para la apertura (El cod. por defecto es 0000).
2.- Y al pulsar de nuevo se accionar el abrepuertas.
Personalizar el cod. de abrepuertas.-Para cambiar el cdigo seguir los pasos siguientes:
1.- Pulsar e introducir el cdigo 1664, pulsar .
2.- En la placa aparece el mensaje "ANTIGUO CODIGO _ _ _ _", teclear el cod. antiguo y pulsar .3.- A continuacin aparece el mensaje "NUEVO CODIGO _ _ _ _", teclear el cdigo nuevo y pulsar .
Codificacin de la instalacin.-Los SDL se codifican del 1 al 254 (ver tabla pag.11). El cdigo asignado corresponder al n de edificio.
Ejemplo: Cdigo 1=Edificio 1 Cdigo 254=Edificio 254.
Las placas interiores son estandar y se codifican de forma independiente (Ver pag.11) pudiendo llevar hasta 254 telfonos o monitorespor acceso interior.
(1) Unidades segn instalacin
Units depending on installation
(2) Ver mod., serie y ref. de la placa de calles
See references on catalogue
(3)
*The power supply unit ALV-DIGITAL 3.5A does not give A/Ccurrent (R-C). So it has to be installed with and ATF-12 powersupply unit to release the electrical strike & to light the cardholder
ATF-98 10
MAX. MAX.
20ALV-3.5A + ATF-12* 4080
*El ALV-3.5A no suministra corriente alterna(R-C) por lo que se debe instalar junto a un ATF-12 paraaccionar el abrepuertas y la iluminacin de los tarjeteros.
Tecl
ado
Vide
o -
Fon
aSD
L
8
Material y funcionamiento/Material and Functioning
COMPONENTS NAME UNITS REF.
Main access PD DIGITAL keyboard (1) 6*****Module of control Module of control SDL (1) 600007
Internal accesses PD DIGITAL (1)(2) 6*****Module of control Module of control (1)(2) 60000*Mod. rows-columns Mod. rows-columns (1) 600002Mounting box Mounting box (1)(2) 50902*Lines selector SDL (1) 730121
Phone Digital compact phone (1) 700105Monitor Digital compact monitor (1) 750105
Video distributor DVC-4S (1) 750498Power supply POWER SUPPLY (3) ******Door opener Door opener (1) 720001
In digital installation and thanks to the SDL is already possible to have multiple communication channels.
The new SDL permits to communicate from several common external accesses to one internal building without affect the rest of internalbuildings, that could maintain simultaneously and independently its communication.
The new SDL is perfect for big condos or housing developments.
Call from the external panel
The call is done in 3 steps:
1st Step: Type the buildings code & press bell . The screen will show INTRODUCE HOUSING
2nd Step: Type the housings code & press bell . (If there is no answer in 10 seconds the panel will back to stand-by)
3rd Step: The panel send the housings code to the housing called. The digital monitor or phone will ring during 30 seconds. The screenwill show *CALLING* C TO CANCEL
In the case of mistake during the housings typing we could rectify by pressing the key C and repeating the steps 1st & 2nd.
If the housing called is engaged the main panel will show the message LINE ENGAGED and will return back on stand-by.
Communication establishment from one external panel
Picking up the handset during the call the communication will be established. We will see on the screen COMMUNICATION ESTABLISHED.
Pressing the corresponding button on the phone or monitor, during the communication, we could release the door opener.
The communication will finish hanging up the handset or 1 m 30 seconds spent. In both cases the message COMMUNICATION ESTABLISHEDwill disappeared and will be shown the message END OF CALL and finally the message INTRODUCE BUILDING.
Calling and communication establishment from the internal panels.-
The internal panels could be either with keypad or push-button. Its configuration will be standard & its functioning and configurationwill be the same as in an individual installation.
When a communication between an external access & an internal building is established, the buildings panel will hold engaged (Redled in Push-button panel - Screen is keypad panel)
Access code
1st Step: Push and dial the code 0000 (code from factory).
2nd Step: Push again the door will be released.
How to modify the door release code1st step: Push and dial the code 1664, then push again.
2nd step: The panel will show you the message OLD CODE_ _ _. Dial the old code (0000 if is the first time the code is modified) and push .
3rd step: The message NEW CODE_ _ _ will be show. Dial the new code and push . The new door release code is activated.
Codification of the installation
The SDL are configured from 1 to 254 (see table page 9). The assigned code will correspond to the building code.
Example: Code 1 = Building 1 Code 254 = Building 254
The internal panels are standard and are codified independently (see digital panel guide). A maximum of 254 monitors or phones couldbe installed per internal access.
(1) Unidades segn instalacin
Units depending on installation
(2) Ver mod., serie y ref. de la placa de calles
See references on catalogue
(3)
*The power supply unit ALV-DIGITAL 3.5A does not give A/Ccurrent (R-C). So it has to be installed with and ATF-12 powersupply unit to release the electrical strike & to light the cardholder
ATF-98 10
MAX. MAX.
20ALV-3.5A + ATF-12* 4080
*El ALV-3.5A no suministra corriente alterna(R-C) por lo que se debe instalar junto a un ATF-12 paraaccionar el abrepuertas y la iluminacin de los tarjeteros.
List of Material
Functionig
Tecl
ado
Vide
oTe
clad
o Vi
deo
- Fo
na
Tecl
ado
Vide
oSD
LD
IGIT
AL
9
a Brazo telefnico/Phone handset
b Multitonos/Multitone
c Volumen llamada/Volume call
d Tecla de cuelgue/Hook switch
e Abrepuertas/Door opener
f Autoencendido/Self starting
g 2 camara (SOLO FUNCIONA CON IMAGEN EN MONITOR) 2nd camera (ONLY WORKS WITH IMAGE AT MONITOR)
h Auxiliar/Auxiliary
i Encendido/On-Off
j Brillo/Brightness
k Contraste/Contrast
a Brazo telefnico/Phone handset
b Multitonos/Multitone
c Volumen llamada/Volume call
d Tecla de cuelgue/Hook switch
e Abrepuertas/Door opener
f Autoencendido/Self starting
g Auxiliar/Auxiliary
MONITOR COMPACT DIGITAL
DIGITAL COMPACT MONITOR
TELFONO COMPACT DIGITAL
DIGITAL COMPACT PHONE
Descripcin y funcionamiento/Description and Functioning
Funcionamiento Bsico/Basic Functioning
(Ver pginas 4-5)(See pages 4-5)
Multitonos/Multitone
El monitor/telefono distingue entre una llamada proveniente de una placa exterior y de una o varias secundarias. Conectando el pulsadordel timbre de la vivienda al monitor/telefono, genera un tono de llamada tambien configurable.
The new digital COMPACT melody monitor phone includes a new selector of tones able to identify from where the monitor/phone is beingcalled. The monitor/phone can distinguish either the call from the external panel or the call from flat's bell.
Seleccin del tono de llamada de la placa de calle/Selection of the calling tone from the external panel
1 Descolgar el mango telefnico y mantener presionada la tecla de cuelgue Pick up the handset pressing the hook
2 Con un objeto punzante(Un palillo, alambre, etc.) pulsar en el agujero para ir cambiando el tonode llamada en el monitor/telfono.
With a little clip push in the selected hole to chage the tone
Seleccin del tono para el pulsador de llamada de la vivienda/Selection of the tone from doorbell1 Descolgar el mango telefnico.
Pick up the handset
2 Con un objeto punzante(Un palillo, alambre, etc.) pulsar en el agujero para ir cambiando el tono de llamada en el monitor/telfono.Al pulsar NO se oye el tono seleccionado
With a clip push in the selected hole. When we are pressig we CAN NOT listen the selected tone
3 Presionar la tecla de cuelgue antes de 5 seg. para oir el tono seleccionado.Press the hook to listen the selected tone
Seleccin del tono de llamada desde la placa/Selection of the tone from outside panel 1 Configurar el mdulo de control de la placa principal con un cdigo par (0, 2, 4, ...) y la otra(s) con un cdigo impar (1, 3, 5, ...)
We have to configure the module of control with a even code (2,4,6,...) or with an odd code (1,3,5,...)
2 Seleccionar el tono de llamada como se indica en apartado: SELECCIN DEL TONO DE LLAMADA DE LA PLACA DE CALLE (Los 2 tonos disponibles llevan asociados otro tono distinto para la llamada desde la(s) placa(s) secundaria(s))
Select a calling code (Selection of the calling tone from external panel)
(Both avaiable tones are linked to another diferent tone when we are making a call from a secondary panel)
Seleccin del volumen de llamada/Selection of the calling volume
1 Presionar para cambiar el volumen de llamada (ALTO-BAJO) Press to change the calling volume (HI-LOW)
1
2
b
a
c
de
f
g
b
a
c
d
e
fg
h
l
i j k
1
Tecl
ado
Vide
o -
Fon
aD
IGIT
AL
10
Codificacin sistema digital placas de pulsadores/Codification of push-button panels in a digital system
1
Situese con la plantilla de cdigos junto a la placa/s y seleccione solo los pulsadores que aparezcan en la placa/s a instalarPut together the panel with the codes pattern and select only the push-buttons that we have in our external panel/s
Suba a cada vivienda con la tabla de cdigos y codifique el telfono/monitor segn el pulsador que llame a esa viviendaCarry out the codes pattern to the flat and set up the codification switch at the monitor/phone with the same push-button code
Tecl
ado
Vide
oTe
clad
o Vi
deo
- Fo
na
Tecl
ado
Vide
oD
IGIT
AL
DIG
ITA
L
11
1*
PLACA CALLE/OUTSIDE PANEL
PASO 1
STEP 1
FUNCIONAMIENTO DEL SISTEMA DIGITAL
DIGITAL SYSTEM FUNCTIONING
PASO 2
STEP 2
COMO ASIGNAR CDIGOS DE LLAMADA
HOW CAN I KNOW MY PUSH-BUTTON CODES
PASO 3
STEP 3
CODIFICACIN MONITOR/TELFONO
MONITOR/PHONE CODIFICATION
CADA PULSADOR DE LA PLACA TIENEASIGNADO UN CDIGO DE LLAMADA
CUANDO PRESIONAMOS UN PULSADORLA PLACA ENVIA ESE CDIGO A LAINSTALACIN, EL MONITOR QUE LO TENGAASIGNADO RESPONDER A ESTA LLAMADA
EACH PUSH-BUT TON HAS ITS OWNCALLING CODE
WHEN WE PRESS ONE PUSH-BUTTONTHE PANEL SENDS THIS CODE TO THEINSTALLATION, THE MONITOR/PHONETHAT WE CONFIGURE WITH THAT CODEWILL ANSWER THE CALL
VISTA POSTERIORREAR SIDE
M/TF EN VIVIENDA / M/PH AT FLAT
EL MONITOR/TF DE LA VIVIENDA SOLO SE ACTIVA CUANDOESTA CODIFICADO Y RECIBE SU CODIGO DE LLAMADA DELPULSADOR DE PLACA CORRESPONDIENTE
FLAT MONITOR/PHONE ONLY COMMUNICATES WHEN WECONFIGURE IT WITH THE CORRECT CODE FROM THE OUTSIDEPANEL PUSHBUTTON
SWITCH DE CONFIGURACIONCONFIGURATION SWITCH
PLACA CALLEOUTSIDE PANEL
PLANTILLA DE CDICOS/CODES PATTERN
ANOTE EN LA PLANTILLAEMPEZANDO POR EL PULSADORMARCADO CON UNA ESTRELLAEL NUMERO DE VIVIENDA
WRITE IN THE CODES PATTERNTHE FLAT NUMBER BESIDE ITSPUSH-BUTTON.STANTING AT THE STAR PICTURE
(VER PLANTILLA CODIGOS BINARIOS)(SEE BINARY CODES PATTERN)
VISTA POSTERIORREAR SIDE
AL MONITOR DE LA VIVIENDA LE CORRESPONDE EL CDIGO 8WE HAVE TO CODIFY CODE 8 AT MONITOR FLAT 2B
EJEMPLO/EXAMPLE
Plantilla de identificacin de cdigos para max. 66 pulsadores/Codes pattern identification for66 pushbuttons max.
Los cdigos de los pulsadores en binario, para codificar los monitores-telfonos, estn en la pgina siguiente.
Tecl
ado
Vide
o -
Fon
aD
IGIT
AL
12
PLANTILLA DE CDIGOSCODES PATTERN
The binary codes to set up the monitors/phones are in the next page.
Identificacin de cdigos del 1 al 254/Codes identification from 1 to 254
Nota: La tabla de cdigos del 1-254 sirve tambin para la codificacin de los SDL (Selector Digital Lneas)
Note: It is possible to use the codes pattern 1-254 to codify SDL (Digital Lines Selector)
En instalaciones con placas decor digitales de teclado exclusivamente, los cdigos se pueden asignar a losmonitores o telfonos libremente, es decir, no es necesario seguir un orden como en las placas de pulsadores.
En las instalaciones con un acceso principal de teclado y placas interiores de pulsador, el cdigo que sedebe marcar para llamar en la placa de teclado es el que le corresponde en el acceso interior en la placade pulsadores.
1 2 3 4 5 6 7 8
CODIGO 1ON
1 2 3 4 5 6 7 8
CODIGO 2ON
1 2 3 4 5 6 7 8
CODIGO 3ON
1 2 3 4 5 6 7 8
CODIGO 4ON
1 2 3 5 6 7 8
CODIGO 5ON
4 1 2 3 4 5 6 7 8
CODIGO 6ON
1 2 3 4 5 6 7 8
CODIGO 7ON
1 2 3 4 5 6 7 8
CODIGO 8ON
1 2 3 4 5 6 7 8
CODIGO 9ON
1 2 3 4 5 6 7 8
CODIGO 10ON
1 2 3 4 5 6 7 8
CODIGO 11ON
1 2 3 4 5 6 7 8
CODIGO 12ON
1 2 3 4 5 6 7 8
CODIGO 24ON
1 2 3 4 5 6 7 8
CODIGO 23ON
1 2 3 4 5 6 7 8
CODIGO 22ON
1 2 3 4 5 6 7 8
CODIGO 21ON
1 2 3 4 5 6 7 8
CODIGO 20ON
1 2 3 4 5 6 7 8
CODIGO 19ON
1 2 3 4 5 6 7 8
CODIGO 18ON
1 2 3 4 5 6 7 8
CODIGO 17ON
1 2 3 4 5 6 7 8
CODIGO 16ON
1 2 3 4 5 6 7 8
CODIGO 15ON
1 2 3 4 5 6 7 8
CODIGO 14ON
1 2 3 4 5 6 7 8
CODIGO 13ON
1 2 3 4 5 6 7 8
CODIGO 25ON
1 2 3 4 5 6 7 8
CODIGO 26ON
1 2 3 4 5 6 7 8
CODIGO 27ON
1 2 3 4 5 6 7 8
CODIGO 28ON
1 2 3 4 5 6 7 8
CODIGO 29ON
1 2 3 4 5 6 7 8
CODIGO 30ON
1 2 3 4 5 6 7 8
CODIGO 31ON
1 2 3 4 5 6 7 8
CODIGO 32ON
1 2 3 4 5 6 7 8
CODIGO 33ON
1 2 3 4 5 6 7 8
CODIGO 34ON
1 2 3 4 5 6 7 8
CODIGO 35ON
1 2 3 4 5 6 7 8
CODIGO 36ON
1 2 3 4 5 6 7 8
CODIGO 46ON
1 2 3 4 5 6 7 8
CODIGO 47ON
1 2 3 4 5 6 7 8
CODIGO 48ON
1 2 3 4 5 6 7 8
CODIGO 57ON
1 2 3 4 5 6 7 8
CODIGO 58ON
1 2 3 4 5 6 7 8
CODIGO 59ON
1 2 3 4 5 6 7 8
CODIGO 60ON
1 2 3 4 5 6 7 8
CODIGO 37ON
1 2 3 4 5 6 7 8
CODIGO 38ON
1 2 3 4 5 6 7 8
CODIGO 39ON
1 2 3 4 5 6 7 8
CODIGO 40ON
1 2 3 4 5 6 7 8
CODIGO 41ON
1 2 3 4 5 6 7 8
CODIGO 42ON
1 2 3 4 5 6 7 8
CODIGO 43ON
1 2 3 4 5 6 7 8
CODIGO 44ON
1 2 3 4 5 6 7 8
CODIGO 45ON
1 2 3 4 5 6 7 8
CODIGO 55ON
1 2 3 4 5 6 7 8
CODIGO 56ON
1 2 3 4 5 6 7 8
CODIGO 49ON
1 2 3 4 5 6 7 8
CODIGO 50ON
1 2 3 4 5 6 7 8
CODIGO 51ON
1 2 3 4 5 6 7 8
CODIGO 52ON
1 2 3 4 5 6 7 8
CODIGO 53ON
1 2 3 4 5 6 7 8
CODIGO 54ON
1 2 3 4 5 6 7 8
CODIGO 61ON
1 2 3 4 5 6 7 8
CODIGO 62ON
1 2 3 4 5 6 7 8
CODIGO 63ON
1 2 3 4 5 6 7 8
CODIGO 64ON
1 2 3 4 5 6 7 8
CODIGO 65ON
1 2 3 4 5 6 7 8
CODIGO 66ON
1 2 3 4 5 6 7 8
CODIGO 67ON
1 2 3 4 5 6 7 8
ONCODIGO 73
1 2 3 4 5 6 7 8
ONCODIGO 74
1 2 3 4 5 6 7 8
ONCODIGO 75
1 2 3 4 5 6 7 8
ONCODIGO 76
1 2 3 4 5 6 7 8
ONCODIGO 77
1 2 3 4 5 6 7 8
ONCODIGO 78
1 2 3 4 5 6 7 8
CODIGO 79ON
1 2 3 4 5 6 7 8
ONCODIGO 85
1 2 3 4 5 6 7 8
ONCODIGO 86
1 2 3 4 5 6 7 8
ONCODIGO 87
1 2 3 4 5 6 7 8
ONCODIGO 88
1 2 3 4 5 6 7 8
ONCODIGO 89
1 2 3 4 5 6 7 8
ONCODIGO 90
1 2 3 4 5 6 7 8
CODIGO 91ON
1 2 3 4 5 6 7 8
CODIGO 68ON
1 2 3 4 5 6 7 8
CODIGO 69ON
1 2 3 4 5 6 7 8
CODIGO 70ON
1 2 3 5 6 7 8
CODIGO 71ON
4 1 2 3 4 5 6 7 8
CODIGO 72ON
1 2 3 4 5 6 7 8
CODIGO 84ON
1 2 3 4 5 6 7 8
CODIGO 83ON
1 2 3 4 5 6 7 8
CODIGO 81ON
1 2 3 4 5 6 7 8
CODIGO 80ON
1 2 3 4 5 6 7 8
CODIGO 92ON
1 2 3 4 5 6 7 8
CODIGO 82ON
1 2 3 4 5 6 7 8
CODIGO 96ON
1 2 3 4 5 6 7 8
CODIGO 95ON
1 2 3 4 5 6 7 8
CODIGO 94ON
1 2 3 4 5 6 7 8
CODIGO 93ON
1 2 3 4 5 6 7 8
ONCODIGO 97
1 2 3 4 5 6 7 8
ONCODIGO 98
1 2 3 4 5 6 7 8
ONCODIGO 99
1 2 3 4 5 6 7 8
ONCODIGO 100
1 2 3 4 5 6 7 8
ONCODIGO 101
1 2 3 4 5 6 7 8
ONCODIGO 102
1 2 3 4 5 6 7 8
CODIGO 103ON
1 2 3 4 5 6 7 8
CODIGO 104ON
1 2 3 4 5 6 7 8
CODIGO 105ON
1 2 3 4 5 6 7 8
CODIGO 106ON
1 2 3 4 5 6 7 8
CODIGO 107ON
1 2 3 4 5 7 8
CODIGO 108ON
6
1 2 3 4 5 6 7 8
CODIGO 120ON
1 2 3 4 5 6 7 8
CODIGO 119ON
1 2 3 4 5 6 7 8
CODIGO 118ON
1 2 3 4 5 6 7 8
CODIGO 117ON
1 2 3 4 5 6 7 8
CODIGO 116ON
1 2 3 4 5 6 7 8
CODIGO 128ON
1 2 3 4 5 6 7 8
CODIGO 140ON
1 2 3 4 5 6 7 8
CODIGO 129ON
1 2 3 4 5 6 7 8
CODIGO 130ON
1 2 3 4 5 6 7 8
CODIGO 131ON
1 2 3 4 5 6 7 8
CODIGO 132ON
1 2 3 4 5 6 7 8
CODIGO 141ON
1 2 3 4 5 6 7 8
CODIGO 142ON
1 2 3 4 5 6 7 8
CODIGO 143ON
1 2 3 4 5 6 7 8
CODIGO 144ON
1 2 3 4 5 6 7 8
CODIGO 152ON
1 2 3 4 5 6 7 8
CODIGO 153ON
1 2 3 4 5 6 7 8
CODIGO 154ON
1 2 3 4 5 6 7 8
CODIGO 155ON
1 2 3 4 5 6 7 8
CODIGO 156ON
1 2 3 4 5 6 7 8
CODIGO 164ON
1 2 3 4 5 6 7 8
CODIGO 165ON
1 2 3 4 5 6 7 8
CODIGO 166ON
1 2 3 4 5 6 7 8
CODIGO 167ON
1 2 3 4 5 6 7 8
CODIGO 168ON
1 2 3 4 5 6 7 8
CODIGO 176ON
1 2 3 4 5 6 7 8
CODIGO 177ON
1 2 3 4 5 6 7 8
CODIGO 178ON
1 2 3 4 5 6 7 8
CODIGO 179ON
1 2 3 4 5 6 7 8
CODIGO 180ON
1 2 3 4 5 6 7 8
CODIGO 188ON
1 2 3 4 5 6 7 8
CODIGO 189ON
1 2 3 4 5 6 7 8
CODIGO 190ON
1 2 3 4 5 6 7 8
CODIGO 191ON
1 2 3 4 5 6 7 8
CODIGO 192ON
1 2 3 4 5 6 7 8
CODIGO 200ON
1 2 3 4 5 6 7 8
CODIGO 201ON
1 2 3 4 5 6 7 8
CODIGO 202ON
1 2 3 4 5 6 7 8
CODIGO 203ON
1 2 3 4 5 6 7 8
CODIGO 204ON
1 2 3 4 5 6 7 8
CODIGO 212ON
1 2 3 4 5 6 7 8
CODIGO 213ON
1 2 3 4 5 6 7 8
CODIGO 214ON
1 2 3 4 5 6 7 8
CODIGO 215ON
1 2 3 4 5 6 7 8
CODIGO 216ON
1 2 3 4 5 6 7 8
CODIGO 224ON
1 2 3 4 5 6 7 8
CODIGO 228ON
1 2 3 4 5 6 7 8
CODIGO 227ON
1 2 3 4 5 6 7 8
CODIGO 226ON
1 2 3 4 5 6 7 8
CODIGO 225ON
1 2 3 4 5 6 7 8
CODIGO 237ON
1 2 3 4 5 6 7 8
CODIGO 238ON
1 2 3 4 5 6 7 8
CODIGO 239ON
1 2 3 4 5 6 7 8
CODIGO 240ON
1 2 3 4 5 6 7 8
CODIGO 175ON
1 2 3 4 5 6 7 8
CODIGO 187ON
1 2 3 4 5 6 7 8
CODIGO 199ON
1 2 3 4 5 6 7 8
CODIGO 211ON
1 2 3 4 5 6 7 8
CODIGO 223ON
1 2 3 4 5 6 7 8
CODIGO 222ON
1 2 3 4 5 6 7 8
CODIGO 210ON
1 2 3 4 5 6 7 8
CODIGO 198ON
1 2 3 4 5 6 7 8
CODIGO 186ON
1 2 3 4 5 6 7 8
CODIGO 174ON
1 2 3 4 5 6 7 8
CODIGO 173ON
1 2 3 4 5 6 7 8
CODIGO 185ON
1 2 3 4 5 6 7 8
CODIGO 197ON
1 2 3 4 5 6 7 8
CODIGO 209ON
1 2 3 4 5 6 7 8
CODIGO 221ON
1 2 3 4 5 6 7 8
CODIGO 233ON
1 2 3 4 5 6 7 8
CODIGO 232ON
1 2 3 4 5 6 7 8
CODIGO 220ON
1 2 3 4 5 6 7 8
CODIGO 208ON
1 2 3 4 5 6 7 8
CODIGO 196ON
1 2 3 4 5 6 7 8
CODIGO 184ON
1 2 3 4 5 6 7 8
CODIGO 172ON
1 2 3 4 5 6 7 8
CODIGO 171ON
1 2 3 4 5 6 7 8
CODIGO 183ON
1 2 3 4 5 6 7 8
CODIGO 195ON
1 2 3 4 5 6 7 8
CODIGO 207ON
1 2 3 4 5 6 7 8
CODIGO 219ON
1 2 3 4 5 6 7 8
CODIGO 231ON
1 2 3 4 5 6 7 8
CODIGO 229ON
1 2 3 4 5 6 7 8
CODIGO 230ON
1 2 3 4 5 6 7 8
CODIGO 217ON
1 2 3 4 5 6 7 8
CODIGO 218ON
1 2 3 4 5 6 7 8
CODIGO 205ON
1 2 3 4 5 6 7 8
CODIGO 206ON
1 2 3 4 5 6 7 8
CODIGO 193ON
1 2 3 4 5 6 7 8
CODIGO 194ON
1 2 3 4 5 6 7 8
CODIGO 181ON
1 2 3 4 5 6 7 8
CODIGO 182ON
1 2 3 4 5 6 7 8
CODIGO 170ON
1 2 3 4 5 6 7 8
ONCODIGO 109
1 2 3 4 5 6 7 8
ONCODIGO 110
1 2 3 4 5 6 7 8
ONCODIGO 111
1 2 3 4 5 6 7 8
ONCODIGO 112
1 2 3 4 5 6 7 8
ONCODIGO 113
1 2 3 4 5 6 7 8
ONCODIGO 114
1 2 3 4 5 6 7 8
CODIGO 115ON
1 2 3 4 5 6 7 8
ONCODIGO 121
1 2 3 4 5 6 7 8
ONCODIGO 122
1 2 3 4 5 6 7 8
ONCODIGO 123
1 2 3 4 5 6 7 8
ONCODIGO 124
1 2 3 4 5 6 7 8
ONCODIGO 125
1 2 3 4 5 6 7 8
ONCODIGO 126
1 2 3 4 5 6 7 8
CODIGO 127ON
1 2 3 4 5 6 7 8
ONCODIGO 133
1 2 3 4 5 6 7 8
ONCODIGO 134
1 2 3 4 5 6 7 8
ONCODIGO 135
1 2 3 4 5 6 7 8
ONCODIGO 136
1 2 3 4 5 6 7 8
ONCODIGO 137
1 2 3 4 5 6 7 8
ONCODIGO 138
1 2 3 4 5 6 7 8
CODIGO 139ON
1 2 3 4 5 6 7 8
CODIGO 145ON
1 2 3 4 5 6 7 8
CODIGO 146ON
1 2 3 4 5 6 7 8
CODIGO 147ON
1 2 3 4 5 6 7 8
CODIGO 148ON
1 2 3 4 5 6 7 8
CODIGO 149ON
1 2 3 4 5 6 7 8
CODIGO 150ON
1 2 3 4 5 6 7 8
CODIGO 151ON
1 2 3 4 5 6 7 8
CODIGO 157ON
1 2 3 4 5 6 7 8
CODIGO 158ON
1 2 3 4 5 6 7 8
CODIGO 159ON
1 2 3 4 5 6 7 8
CODIGO 160ON
1 2 3 4 5 6 7 8
CODIGO 161ON
1 2 3 4 5 6 7 8
CODIGO 162ON
1 2 3 4 5 6 7 8
CODIGO 163ON
1 2 3 4 5 6 7 8
CODIGO 169ON
1 2 3 4 5 6 7 8
CODIGO 241ON
1 2 3 4 5 6 7 8
CODIGO 242ON
1 2 3 4 5 6 7 8
CODIGO 243ON
1 2 3 4 5 6 7 8
CODIGO 244ON
1 2 3 4 5 6 7 8
CODIGO 245ON
1 2 3 4 5 6 7 8
CODIGO 253ON
1 2 3 4 5 6 7 8
CODIGO 254ON
1 2 3 4 5 6 7 8
CODIGO 234ON
1 2 3 4 5 6 7 8
CODIGO 246ON
1 2 3 4 5 6 7 8
CODIGO 235ON
1 2 3 4 5 6 7 8
CODIGO 247ON
1 2 3 4 5 6 7 8
CODIGO 236ON
1 2 3 4 5 6 7 8
CODIGO 248ON
1 2 3 4 5 6 7 8
CODIGO 249ON
1 2 3 4 5 6 7 8
CODIGO 252ON
1 2 3 4 5 6 7 8
CODIGO 251ON
1 2 3 4 5 6 7 8
CODIGO 250ON
Tecl
ado
Vide
oTe
clad
o Vi
deo
- Fo
na
Tecl
ado
Vide
oD
IGIT
AL
DIG
ITA
L
13
In installations with digital dcor panels up to 254 monitors or digital decor phones can be used for eachpanel. The codification system is different to the system with push-button due to it does not use the rowsand columns method.
Kit fonia S1/Audio S1 kit
HASTA/UP TO100 M.
SECCIONESW. SECTIONS
HASTA/UP TO200 M.
Alim. SEPARADASEPARATE Supply( (
EL CABLEADO NO DEBE PASAR CERCA DE LA LINEA ELCTRICATHE WIRING MUST NOT BE RUN CLOSE TO THE ELECTRICAL LINE
1.5 mm (AWG15)1 mm (AWG17)
0.5 mm (AWG20) 1 mm (AWG17)
ATF-1
2
220Vac
Tecl
ado
Vide
o -
Fon
aAU
DIO
14
Kit fonia S1 (Hasta 16 accesos)/Audio S1 kit (Up 16 accesses)
ATF
-98
CODIFICACIN TELFONOPHONE CONFIGURATION
ABREPUERTASDOOR RELEASE
PULSADORAUXILIAR
ABREPUERTASDOOR RELEASE
AUXILARYPUSHBUTTON
CODIFICATION PANEL
AVAILABLE UNAVAILABLE
AVAILABLE UNAVAILABLE
CODE CODE CODE
external panel code
SCHEMATICREPRESENTATION
PULSADORAUXILIAR
ABREPUERTASDOOR RELEASE
AUXILARYPUSHBUTTON
ATF
-98
CODIFICACIN TELFONOPHONE CONFIGURATION
ABREPUERTASDOOR RELEASE
ABREPUERTASDOOR RELEASE
PLACAPRINCIPAL
MAINPANEL
PUENTEINTERIOR
INTERNALJUMPER
PLACASECUND.
SECOND.PANEL
PUENTEINTERIOR
INTERNALJUMPER
CODIFICATION PANEL
AVAILABLE UNAVAILABLE
AVAILABLE UNAVAILABLE
CODE CODE CODE
external panel code
SCHEMATICREPRESENTATION
CODIFICATION PANEL
AVAILABLE UNAVAILABLE
AVAILABLE UNAVAILABLE
CODE CODE CODE
external panel code
SCHEMATICREPRESENTATION
PULSADORAUXILIAR
ABREPUERTASDOOR RELEASE
AUXILARYPUSHBUTTON
Max. TF/PHLlamada Simul.
Same call
ATF-98
ALV-3.5A 4
2
Una puerta de acceso/One access
HASTA/UP TO100 M.
SECCIONESW. SECTIONS
HASTA/UP TO200 M.
Alim. SEPARADASEPARATE Supply( (
EL CABLEADO NO DEBE PASAR CERCA DE LA LINEA ELCTRICATHE WIRING MUST NOT BE RUN CLOSE TO THE ELECTRICAL LINE
1.5 mm (AWG15)1 mm (AWG17)
0.5 mm (AWG20) 1 mm (AWG17)
*The power supply unit ALV-DIGITAL 3.5A does not give A/Ccurrent (R-C). So it has to be installed with and ATF-12 powersupply unit to release the electrical strike & to light the cardholder
ATF-98 10
MAX. MAX.
20ALV-3.5A + ATF-12* 4080
*El ALV-3.5A no suministra corriente alterna(R-C) por lo que se debe instalar junto a un ATF-12 paraaccionar el abrepuertas y la iluminacin de los tarjeteros.
HASTA/UP TO100 M.
SECCIONESW. SECTIONS
HASTA/UP TO200 M.
Alim. SEPARADASEPARATE Supply( (
EL CABLEADO NO DEBE PASAR CERCA DE LA LINEA ELCTRICATHE WIRING MUST NOT BE RUN CLOSE TO THE ELECTRICAL LINE
1.5 mm (AWG15)1 mm (AWG17)
0.5 mm (AWG20) 1 mm (AWG17)
Dos puertas de acceso (Hasta 16 accesos)/Two accesses (Up to 16 Accesses)
C R-- +Vi -b ViaVob
Voa C R
MDULO
CONTROL
C4 23 1 PAL
1 2 3 4 5 876
ON
++
R
-
-
C
22
0V
- +
+-
ATF
-12
220Vac
C R-- +Vi -b ViaVob
Voa C R
C4 23 1 PAL
1 2 3 4 5 876
ON
+-
- +
C R-- +Vi -b ViaVob
Voa C R
MDULO
CONTROL
C4 23 1 PAL
1 2 3 4 5 876
ON
CONTROL
MODULE
CONTROL
MODULE
MDULO
CONTROLCONTROL
MODULE
CODIFICACIN DE MODULO DE CONTROL
REPRESENTACIN
ESQUEMTICA
ON
1 2 3 4 5 6 7 8
4 3 2 1 L C A P
1
4
CDIGO
34ON
21
2
3
A P
7 85 6
CL
4 3 2 1: (1,2,3,4), cdigo de placa de calle
C: (6), LLAMADA A CENTRAL: ACT DES
A: (7), AUTOENCENDIDO: ACT DES
P: (8), PLACA: PRINCIPAL SECUNDARIA
MODULE OF CONTROL CONFIGURATION
Panel code
L: (5), IDIOMA (TECLADO): ES/PT IN/FR LANGUAGE (KEYPAD) SP/PT EN/FR
C.C.I. CALL ON OFF
SELFSTARTING ON OFF
PANEL MAIN SLAVE
SCHEMATIC
REPRESENTATION
CODIFICACIN DE MODULO DE CONTROL
REPRESENTACIN
ESQUEMTICA
ON
1 2 3 4 5 6 7 8
4 3 2 1 L C A P
1
4
CDIGO
34ON
21
2
3
A P
7 85 6
CL
4 3 2 1: (1,2,3,4), cdigo de placa de calle
C: (6), LLAMADA A CENTRAL: ACT DES
A: (7), AUTOENCENDIDO: ACT DES
P: (8), PLACA: PRINCIPAL SECUNDARIA
MODULE OF CONTROL CONFIGURATION
Panel code
L: (5), IDIOMA (TECLADO): ES/PT IN/FR LANGUAGE (KEYPAD) SP/PT EN/FR
C.C.I. CALL ON OFF
SELFSTARTING ON OFF
PANEL MAIN SLAVE
SCHEMATIC
REPRESENTATION
Tecl
ado
Vide
oTe
clad
o Vi
deo
- Fo
na
Tecl
ado
Vide
oAU
DIO
DIG
ITA
L
15
ATF
-98
ABREPUERTASDOOR RELEASE
PULSADORAUXILIAR
ABREPUERTASDOOR RELEASE
AUXILARYPUSHBUTTON
BATERIABATTERY
ABREPUERTASDOOR RELEASE
ABREPUERTASDOOR RELEASE
La instalacin con placas de teclado esexactamente igual que con placas depulsadores. Solamente cambia el modelode mdulo de control.
654
1 2 3
7 8 9
C 0
The keypad installationi s t h e s ame a spushbutton system, onlywe have to change themodule of contro lreference
ATF-98
1 Acc. Gen. teclado y hasta 15 secundarios/1 Outer keypad acc. and up to 15 inner acc.
HA
STA
/U
P T
O1
00
M.
SECC
ION
ESW
. SECTIO
NS
HA
STA
/U
P T
O2
00
M.
Ali
m.
SE
PA
RA
DA
SE
PA
RA
TE
Su
pp
ly(
(
EL C
ABLE
AD
O N
O D
EBE
PASA
R CE
RCA
DE
LA L
INEA
EL
CTRI
CATH
E W
IRIN
G M
UST N
OT B
E R
UN
CLOSE T
O T
HE E
LECTRIC
AL L
INE
1.5
mm
(A
WG1
5)
1 m
m
( AW
G1
7)
0.5
mm
(A
WG2
0)
1 m
m
(AW
G1
7)
*The
pow
er sup
ply
unit
ALV
-DIG
ITAL
3.5A
doe
s no
t give
A/C
curre
nt (
R-C
). S
o it
has to
be in
stalled
with
and
ATF
-12
power
supp
ly u
nit t
o releas
e th
e elec
trica
l stri
ke &
to ligh
t the
car
dholde
r
ATF-
9810
MAX
.M
AX.
20ALV
-3.5
A +
ATF
-12*
4080
*El
ALV
-3.5
A
no
sum
inis
tra
corr
iente
alt
ern
a(R
-C)
por lo
que
se
debe
ins
tala
r ju
nto
a un
ATF
-12
para
accion
ar e
l abr
epue
rtas
y la
ilu
min
aci
n de
los ta
rjet
eros
.
HA
STA
/U
P T
O1
00
M.
SECC
ION
ESW
. SECTIO
NS
HA
STA
/U
P T
O2
00
M.
Ali
m.
SE
PA
RA
DA
SE
PA
RA
TE
Su
pp
ly(
(
EL C
ABLE
AD
O N
O D
EBE
PASA
R CE
RCA
DE
LA L
INEA
EL
CTRI
CATH
E W
IRIN
G M
UST N
OT B
E R
UN
CLOSE T
O T
HE E
LECTRIC
AL L
INE
1.5
mm
(A
WG1
5)
1 m
m
( AW
G1
7)
0.5
mm
(A
WG2
0)
1 m
m
(AW
G1
7)
CR
--
+V
i-
bV
i aV
o bV
o aC
R
C4
23
1P
AL
12
34
58
76
ON
ATF-12
CR
--
+V
i-
bV
i aV
o bV
o aC
R
C4
23
1P
AL
12
34
58
76
ON
CR
--
+V
i-
bV
i aV
o bV
o aC
R
C4
23
1P
AL
12
34
58
76
ON
CR
--
+V
i-
bV
i aV
o bV
o aC
R
C4
23
1P
AL
12
34
58
76
ON
CO
DIF
ICA
CI
N D
E M
OD
ULO
DE
CO
NTR
OL
RE
PR
ES
EN
TA
CI
N
ES
QU
EM
TIC
A
ON 1
23
45
67
8
43
21
LC
AP
1 4
C
DIG
O 34 ON
21
2 3
AP
78
56C
L
4 3
2 1
: (1
,2,3
,4),
c
dig
o d
e p
lac
a d
e c
all
e
C
: (6
), L
LA
MA
DA
A C
EN
TR
AL
: A
CT D
ES
A
: (7
), A
UTO
EN
CE
ND
IDO
: A
CT D
ES
P
: (8
), P
LA
CA
: P
RIN
CIP
AL
SE
CU
ND
AR
IA
MO
DU
LE
OF
CO
NTR
OL C
ON
FIG
UR
ATIO
N
Pa
ne
l c
od
e
L
: (5
), I
DIO
MA
(TE
CL
AD
O):
ES
/P
T
I
N/
FR
L
AN
GU
AG
E (
KE
YP
AD
) S
P/P
T
E
N/F
R
C
.C.I
. C
ALL
ON
OF
F
S
ELF
STA
RTIN
G O
N
O
FF
P
AN
EL M
AIN
S
LA
VE
SC
HE
MA
TIC
RE
PR
ES
EN
TA
TIO
N
M
DU
LO
CO
NTR
OL
CO
NTR
OL
MO
DU
LE
M
DU
LO
CO
NTR
OL
CO
NTR
OL
MO
DU
LE
M
DU
LO
CO
NTR
OL
CO
NTR
OL
MO
DU
LE
M
DU
LO
CO
NTR
OL
CO
NTR
OL
MO
DU
LE
Tecl
ado
Vide
o -
Fon
aAU
DIO
16
220V
R C
22
0V
ac
PL
AC
A S
EC
UN
D.
INN
ER
PA
NE
L
CO
D.
1
65
412
3
78
9
C0
ATF-98
220VR C
65
412
3
78
9
C0
La i
nst
alac
in c
on p
laca
s de
tec
lado
es
exac
tam
ente
igual
que
con p
laca
s de
puls
adore
s. S
ola
men
te c
ambia
el m
ode
lode
mdu
lo d
e co
ntr
ol.
65
412
3
78
9
C0
The
keyp
ad inst
alla
tion
is
the
sa
me
as
push
butt
on s
yste
m, on
lyw
e hav
e to
chan
ge t
he
modu
le
of
con
trol
refe
rence
En e
ste
tipo
de
sist
ema
(SIN
SD
L) s
olo
exis
te u
na l
inea
de c
omunic
aci
n.
Por
lo t
anto
, cu
ando
se
real
iza
una
llam
ada/
auto
ence
ndi
do e
n a
lgn a
cces
o, e
l re
sto
del
sist
ema
perm
anec
e oc
upad
o du
rant
e un
tie
mpo
mx
imo
de90
seg
undo
s.That
kin
d o
f co
nfi
gura
tion (
WIT
HOU
T S
DL) o
nly
allow
s to
have one com
unic
ati
on li
ne.
When a call
/se
lfst
art
ing is
done t
he s
yst
em
sta
y b
usy
for
90 s
eco
nds
Para
su c
onfi
gura
cin
se
deber
an t
ener
en c
uen
ta l
osc
digo
s de
los
pul
sado
res
y pl
acas
de
tecl
ado.
Se
han
de h
acer
coi
ncid
ir c
on e
l ac
ceso
gen
eral
y q
ue n
o se
rep
itan
entr
e el
los.
For
the s
yst
em
confi
gura
tion w
e m
ust
consi
der
all t
he c
odes
at
push
butt
ons
and k
eypad p
anels
.W
e
need
to
connect
all
the
panels
w
ithout
repeat
any c
ode.
ABREP
UER
TAS
DO
OR
RE
LEA
SE
ABREP
UER
TAS
DO
OR
RE
LEA
SE
ABREP
UER
TAS
DO
OR
RE
LEA
SE
ABREP
UER
TAS
DO
OR
RE
LEA
SE
BATERIA
BA
TT
ER
Y
PL
AC
A S
EC
UN
D.
INN
ER
PA
NE
L
CO
D.
2
PL
AC
A S
EC
UN
D.
INN
ER
PA
NE
L
CO
D.
15
PL
AC
A G
EN
ER
AL
OU
TE
R P
AN
EL
CO
D.
0
1 Acc. exterior y hasta 254 Interiores/1 Ext. access and up to 254 Internal accesses
ATF-98
ATF-98
ALV 3.5A
*The
pow
er sup
ply
unit
ALV
-DIG
ITAL
3.5A
doe
s no
t give
A/C
curre
nt (
R-C
). S
o it
has to
be in
stalled
with
and
ATF
-12
power
supp
ly u
nit t
o releas
e th
e elec
trica
l stri
ke &
to ligh
t the
car
dholde
r
ATF-
9810
MAX
.M
AX.
20ALV
-3.5
A +
ATF
-12*
4080
*El
ALV
-3.5
A
no
sum
inis
tra
corr
iente
alt
ern
a(R
-C)
por lo
que
se
debe
ins
tala
r ju
nto
a un
ATF
-12
para
accion
ar e
l abr
epue
rtas
y la
ilu
min
aci
n de
los ta
rjet
eros
.
HA
STA
/U
P T
O1
00
M.
SECC
ION
ESW
. SECTIO
NS
HA
STA
/U
P T
O2
00
M.
Ali
m.
SE
PA
RA
DA
SE
PA
RA
TE
Su
pp
ly(
(
EL C
ABLE
AD
O N
O D
EBE
PASA
R CE
RCA
DE
LA L
INEA
EL
CTRI
CATH
E W
IRIN
G M
UST N
OT B
E R
UN
CLOSE T
O T
HE E
LECTRIC
AL L
INE
1.5
mm
(A
WG1
5)
1 m
m
(AW
G1
7)
0.5
mm
(A
WG2
0)
1 m
m
(AW
G1
7)
CR
--
+V
i-
bV
i aV
o bV
o aC
R
C4
23
1P
AL
12
34
58
76
ON
CR
--
+V
i-
bV
i aV
o bV
o aC
R
C4
23
1P
AL
12
34
58
76
ON
CR
--
+V
i-
bV
i aV
o bV
o aC
R
C4
23
1P
AL
12
34
58
76
ON
ATF-12
M
DU
LO
CO
NTR
OL
CO
NTR
OL
MO
DU
LE
M
DU
LO
CO
NTR
OL
CO
NTR
OL
MO
DU
LE
CO
DIF
ICA
CI
N D
E M
OD
ULO
DE
CO
NTR
OL
RE
PR
ES
EN
TA
CI
N
ES
QU
EM
TIC
A
ON 1
23
45
67
8
43
21
LC
AP
1 4
C
DIG
O 34 ON
21
2 3
AP
78
56C
L
4 3
2 1
: (1
,2,3
,4),
c
dig
o d
e p
lac
a d
e c
all
e
C
: (6
), L
LA
MA
DA
A C
EN
TR
AL
: A
CT D
ES
A
: (7
), A
UTO
EN
CE
ND
IDO
: A
CT D
ES
P
: (8
), P
LA
CA
: P
RIN
CIP
AL
SE
CU
ND
AR
IA
MO
DU
LE
OF
CO
NTR
OL C
ON
FIG
UR
ATIO
N
Pa
ne
l c
od
e
L
: (5
), I
DIO
MA
(TE
CL
AD
O):
ES
/P
T
I
N/
FR
L
AN
GU
AG
E (
KE
YP
AD
) S
P/P
T
E
N/F
R
C
.C.I
. C
ALL
ON
OF
F
S
ELF
STA
RTIN
G O
N
O
FF
P
AN
EL M
AIN
S
LA
VE
SC
HE
MA
TIC
RE
PR
ES
EN
TA
TIO
N
Tecl
ado
Vide
oTe
clad
o Vi
deo
- Fo
na
Tecl
ado
Vide
oAU
DIO
DIG
ITA
L
17
SD
L P
LU
S
(Ed
ific
io/
Bu
ild
ing
1)
12
34
56
78
A
CC
ES
O
EX
TE
RIO
R
EXTERNAL
ACCESS
220 V
ac
Va
Vb
Vb
Va
VID
EO I
NVI
DEO
OU
T
Va
Vb
Vb
Va
PLA
CABAJA
NTE
SD
L P
LU
S
12
34
56
78
Va
Vb
Vb
Va
VID
EO I
NVI
DEO
OU
T
Va
Vb
Vb
Va
PLA
CABAJA
NTE
65
412
3
78
9
C0
65
412
3
78
9
C0
BU
S SD
LSD
L B
US
La i
nst
alac
in c
on p
laca
s de
tec
lado
es
exac
tam
ente
igual
que
con p
laca
s de
puls
adore
s. S
ola
men
te c
ambia
el m
ode
lode
mdu
lo d
e co
ntr
ol.
65
412
3
78
9
C0
The
keyp
ad inst
alla
tion
is
the
sa
me
as
push
butt
on s
yste
m, on
lyw
e hav
e to
chan
ge t
he
modu
le
of
con
trol
refe
rence
PL
AC
A P
RIN
CIP
AL
MA
IN P
AN
EL
CO
D.
0
ABREP
UER
TAS
DO
OR
RE
LEA
SE
(Ed
ific
io/
Bu
ild
ing
25
4)
A
CC
ES
O
INT
ER
IOR
INTERNAL
ACCESS
ABREP
UER
TAS
DO
OR
RE
LEA
SE
PL
AC
A P
RIN
CIP
AL
MA
IN P
AN
EL
CO
D.
0 A
CC
ES
O
INT
ER
IOR
INTERNAL
ACCESS
ABREP
UER
TAS
DO
OR
RE
LEA
SE
PL
AC
A P
RIN
CIP
AL
MA
IN P
AN
EL
CO
D.
0
SIEM
PRE
PLACA
TEC
LAD
OALW
AYS K
EYPAD
PAN
EL
BATERIA
BA
TT
ER
Y
2 Acc. ext.(Hasta 16) y hasta 254 Int./2 Ext. acc.(Up to 16)and up to 254 Int. acc.)
ATF-98
ALV 3.5A
*The
pow
er sup
ply
unit
ALV
-DIG
ITAL
3.5A
doe
s no
t give
A/C
curre
nt (
R-C
). S
o it
has to
be in
stalled
with
and
ATF
-12
power
supp
ly u
nit t
o releas
e th
e elec
trica
l stri
ke &
to ligh
t the
car
dholde
r
ATF-
9810
MAX
.M
AX.
20ALV
-3.5
A +
ATF
-12*
4080
*El
ALV
-3.5
A
no
sum
inis
tra
corr
iente
alt
ern
a(R
-C)
por lo
que
se
debe
ins
tala
r ju
nto
a un
ATF
-12
para
accion
ar e
l abr
epue
rtas
y la
ilu
min
aci
n de
los ta
rjet
eros
.
HA
STA
/U
P T
O1
00
M.
SECC
ION
ESW
. SECTIO
NS
HA
STA
/U
P T
O2
00
M.
Ali
m.
SE
PA
RA
DA
SE
PA
RA
TE
Su
pp
ly(
(
EL C
ABLE
AD
O N
O D
EBE
PASA
R CE
RCA
DE
LA L
INEA
EL
CTRI
CATH
E W
IRIN
G M
UST N
OT B
E R
UN
CLOSE T
O T
HE E
LECTRIC
AL L
INE
1.5
mm
(A
WG1
5)
1 m
m
(AW
G1
7)
0.5
mm
(A
WG2
0)
1 m
m
(AW
G1
7)
ATF-98ATF-98
CR
--
+V
i-
bV
i aV
o bV
o aC
R
C4
23
1P
AL
12
34
58
76
ON
CR
--
+V
i-
bV
i aV
o bV
o aC
R
C4
23
1P
AL
12
34
58
76
ON
ATF-12
M
DU
LO
CO
NTR
OL
CO
NTR
OL
MO
DU
LE
M
DU
LO
CO
NTR
OL
CO
NTR
OL
MO
DU
LE
CR
--
+V
i-
bV
i aV
o bV
o aC
R
C4
23
1P
AL
12
34
58
76
ON
CR
--
+V
i-
bV
i aV
o bV
o aC
R
C4
23
1P
AL
12
34
58
76
ON
M
DU
LO
CO
NTR
OL
CO
NTR
OL
MO
DU
LE
M
DU
LO
CO
NTR
OL
CO
NTR
OL
MO
DU
LE
Tecl
ado
Vide
o -
Fon
aAU
DIO
18
La i
nst
alac
in c
on p
laca
s de
tec
lado
es
exac
tam
ente
igual
que
con p
laca
s de
puls
adore
s. S
ola
men
te c
ambia
el m
ode
lode
mdu
lo d
e co
ntr
ol.
65
412
3
78
9
C0
The
keyp
ad inst
alla
tion
is
the
sa
me
as
push
butt
on s
yste
m, on
lyw
e hav
e to
chan
ge t
he
modu
le
of
con
trol
refe
rence
22
0 V
ac
SD
L P
LU
S
12
34
56
78
Va
Vb
Vb
Va
VID
EO I
NVI
DEO
OU
T
Va
Vb
Vb
Va
PLA
CABAJA
NTE
SD
L P
LU
S
12
34
56
78
Va
Vb
Vb
Va
VID
EO I
NVI
DEO
OU
T
Va
Vb
Vb
Va
PLA
CABAJA
NTE
65
412
3
78
9
C0
BU
S SD
LSD
L B
US
BATERIA
BA
TT
ER
Y
A
CC
ES
O
INT
ER
IOR
INTERNAL
ACCESS
A
CC
ES
O
INT
ER
IOR
INTERNAL
ACCESS
ABREP
UER
TAS
DO
OR
RE
LEA
SE
ABREP
UER
TAS
DO
OR
RE
LEA
SE
(Ed
ific
io/
Bu
ild
ing
1)
(Ed
ific
io/
Bu
ild
ing
25
4)
PL
AC
A P
RIN
CIP
AL
MA
IN P
AN
EL
CO
D.
0
PL
AC
A P
RIN
CIP
AL
MA
IN P
AN
EL
CO
D.
0
65
412
3
78
9
C0
65
412
3
78
9
C0
A
CC
ES
O
EX
TE
RIO
R
EXTERNAL
ACCESS
ABREP
UER
TAS
DO
OR
RE
LEA
SE
A
CC
ES
O
EX
TE
RIO
R
EXTERNAL
ACCESS
ABREP
UER
TAS
DO
OR
RE
LEA
SE
SIEM
PRE
PLACA
TEC
LAD
OALW
AYS K
EYPAD
PAN
EL
SIEM
PRE
PLACA
TEC
LAD
OALW
AYS K
EYPAD
PAN
EL
PL
AC
A P
RIN
CIP
AL
MA
IN P
AN
EL
CO
D.
0
PL
AC
A S
EC
UN
D.
SE
CO
ND
. P
AN
EL
CO
D.
1
C.C.I. Audio/Audio C.C.I.
HASTA/UP TO100 M.
SECCIONESW. SECTIONS
HASTA/UP TO200 M.
Alim. SEPARADASEPARATE Supply( (
EL CABLEADO NO DEBE PASAR CERCA DE LA LINEA ELCTRICATHE WIRING MUST NOT BE RUN CLOSE TO THE ELECTRICAL LINE
1.5 mm (AWG15)1 mm (AWG17)
0.5 mm (AWG20) 1 mm (AWG17)
Tecl
ado
Vide
oTe
clad
o Vi
deo
- Fo
na
Tecl
ado
Vide
oAU
DIO
DIG
ITA
L
19
ATENCIN
Conector Programacin
Los mdulos de control DECOR + (600009) y DIRECTORIO (600010),asi como la CENTRAL de conserjeria COMPACT INTEGRADA,necesitan ser programados/a con la base de datos de los vecinospara su funcionamiento.Esta operacion puede realizarse manualmente desde la propia placade calle/central de conserjeria, siguiendo los menus, o bienremotamente, via BLUETOOTH o PC. En ambos casos es necesarioel kit de programacin PC (Ref:167041)
SOFTWAREPROGRAMACIN
auta
WARNING
Programming Connector
The module of control DECOR + (600009), DIRECTORY (600010),and the digital INTEGRATED COMPACT SWITCHBOARD,must be programmed with the data base of the tenants for itcorrect working.We can do that operation, manually, from the panel/switchboardfollowing the settings menus, and remotely, by PC or BLUETOOTH.In both cases we must use the PC programming kit. (Ref:167041)
auta
PROGRAMMING SOFTWARE
OK
ALBUS GENERAL
TOGENERAL BUS
C.C.I. AUDIOAUDIO C.C.I.
A PLACATO PANEL
CAM
ARA
SOLO
VID
EOVID
EO O
NLY
Kit Video S1/S1 Video Kit
HASTA/UP TO100 M.
SECCIONESW. SECTIONS
HASTA/UP TO200 M.
Alim. SEPARADASEPARATE Supply( (
EL CABLEADO NO DEBE PASAR CERCA DE LA LINEA ELCTRICATHE WIRING MUST NOT BE RUN CLOSE TO THE ELECTRICAL LINE
1.5 mm (AWG15)1 mm (AWG17)
0.5 mm (AWG20) 1 mm (AWG17)
Kit Video S1 (Hasta 16 accesos)/Video S1 kit (Up to 16 accesses)
ATF-1
2
220Vac
Tecl
ado
Vide
o -
Fon
aVI
DEO
COA
X
20
ATF
-98
ABREPUERTASDOOR RELEASE
PULSADORAUXILIAR
ABREPUERTASDOOR RELEASE
AUXILARYPUSHBUTTON
CODIFICATION PANEL
AVAILABLE UNAVAILABLE
AVAILABLE UNAVAILABLE
CODE CODE CODE
external panel code
SCHEMATICREPRESENTATION
PULSADORAUXILIAR
ABREPUERTASDOOR RELEASE
AUXILARYPUSHBUTTON
ATF
-98
ABREPUERTASDOOR RELEASE
ABREPUERTASDOOR RELEASE
PLACAPRINCIPAL
MAINPANEL
PUENTEINTERIOR
INTERNALJUMPER
PLACASECUND.
SECOND.PANEL
PUENTEINTERIOR
INTERNALJUMPER
CODIFICATION PANEL
AVAILABLE UNAVAILABLE
AVAILABLE UNAVAILABLE
CODE CODE CODE
external panel code
SCHEMATICREPRESENTATION
CODIFICATION PANEL
AVAILABLE UNAVAILABLE
AVAILABLE UNAVAILABLE
CODE CODE CODE
external panel code
SCHEMATICREPRESENTATION
PULSADORAUXILIAR
ABREPUERTASDOOR RELEASE
AUXILARYPUSHBUTTON
CONFIGURACIN MONITORMONITOR CONFIGURATION
DISTRIBUCIN EN SERIECASCADE DISTRIBUTION
AVANT
ON
C150
75
VaVi
-Vb
AVANT
ON
C150
75
VaVi
-Vb
Max. MON.Llamada Simul.
Same call
ATF-98
ALV-3.5A 4
2
Kit Video S1 (Hasta 16 accesos)/Video S1 kit (Up to 16 accesses)
HASTA/UP TO100 M.
SECCIONESW. SECTIONS
HASTA/UP TO200 M.
Alim. SEPARADASEPARATE Supply( (
EL CABLEADO NO DEBE PASAR CERCA DE LA LINEA ELCTRICATHE WIRING MUST NOT BE RUN CLOSE TO THE ELECTRICAL LINE
1.5 mm (AWG15)1 mm (AWG17)
0.5 mm (AWG20) 1 mm (AWG17)T
ATF-1
2
220Vac
Tecl
ado
Vide
oTe
clad
o Vi
deo
- Fo
na
Tecl
ado
Vide
oVI
DEO
COA
XD
IGIT
AL
21
DISTRIBUCIN EN ESTRELLASTAR DISTRIBUTION
PULSADORAUXILIAR
ABREPUERTASDOOR RELEASE
AUXILARYPUSHBUTTON
ATF
-98
ABREPUERTASDOOR RELEASE
ABREPUERTASDOOR RELEASE
PLACAPRINCIPAL
MAINPANEL
PUENTEINTERIOR
INTERNALJUMPER
PLACASECUND.
SECOND.PANEL
PUENTEINTERIOR
INTERNALJUMPER
CODIFICATION PANEL
AVAILABLE UNAVAILABLE
AVAILABLE UNAVAILABLE
CODE CODE CODE
external panel code
SCHEMATICREPRESENTATION
CODIFICATION PANEL
AVAILABLE UNAVAILABLE
AVAILABLE UNAVAILABLE
CODE CODE CODE
external panel code
SCHEMATICREPRESENTATION
PULSADORAUXILIAR
ABREPUERTASDOOR RELEASE
AUXILARYPUSHBUTTON
+T-T P1a P1b P2a P2b Sa Sb
P1
P2
S
+T-T P1a P1b P2a P2b Sa Sb
AVANT
ON
C150
75
Max. MON.Llamada Simul.
Same call
ATF-98
ALV-3.5A 4
2
VaVi
-Vb
Una puerta de acceso/One access
Dos puertas de acceso, 1 video y otra de fona/Two accesses, 1 Video & 1 Audio
HASTA/UP TO100 M.
SECCIONESW. SECTIONS
HASTA/UP TO200 M.
Alim. SEPARADASEPARATE Supply( (
EL CABLEADO NO DEBE PASAR CERCA DE LA LINEA ELCTRICATHE WIRING MUST NOT BE RUN CLOSE TO THE ELECTRICAL LINE
1.5 mm (AWG15)1 mm (AWG17)
0.5 mm (AWG20) 1 mm (AWG17)
*The power supply unit ALV-DIGITAL 3.5A does not give A/Ccurrent (R-C). So it has to be installed with and ATF-12 powersupply unit to release the electrical strike & to light the cardholder
ATF-98 10
MAX. MAX.
20ALV-3.5A + ATF-12* 4080
*El ALV-3.5A no suministra corriente alterna(R-C) por lo que se debe instalar junto a un ATF-12 paraaccionar el abrepuertas y la iluminacin de los tarjeteros.
C R-- +Vi -b ViaVob
Voa C R C R-- +
Vi -bVia
Vob
Voa C R
ATF
-12
220Vac
C4 23 1 PAL
1 2 3 4 5 876
ON
C4 23 1 PAL
1 2 3 4 5 876
ON
C R-- +Vi -b ViaVob
Voa C R
++
R
-
-
C
22
0V
C4 23 1 PAL
1 2 3 4 5 876
ON
ATF
-98
CODIFICACIN DE MODULO DE CONTROL
REPRESENTACIN
ESQUEMTICA
ON
1 2 3 4 5 6 7 8
4 3 2 1 L C A P
1
4
CDIGO
34ON
21
2
3
A P
7 85 6
CL
4 3 2 1: (1,2,3,4), cdigo de placa de calle
C: (6), LLAMADA A CENTRAL: ACT DES
A: (7), AUTOENCENDIDO: ACT DES
P: (8), PLACA: PRINCIPAL SECUNDARIA
MODULE OF CONTROL CONFIGURATION
Panel code
L: (5), IDIOMA (TECLADO): ES/PT IN/FR LANGUAGE (KEYPAD) SP/PT EN/FR
C.C.I. CALL ON OFF
SELFSTARTING ON OFF
PANEL MAIN SLAVE
SCHEMATIC
REPRESENTATION
MDULO
CONTROLCONTROL
MODULE
CODIFICACIN DE MODULO DE CONTROL
REPRESENTACIN
ESQUEMTICA
ON
1 2 3 4 5 6 7 8
4 3 2 1 L C A P
1
4
CDIGO
34ON
21
2
3
A P
7 85 6
CL
4 3 2 1: (1,2,3,4), cdigo de placa de calle
C: (6), LLAMADA A CENTRAL: ACT DES
A: (7), AUTOENCENDIDO: ACT DES
P: (8), PLACA: PRINCIPAL SECUNDARIA
MODULE OF CONTROL CONFIGURATION
Panel code
L: (5), IDIOMA (TECLADO): ES/PT IN/FR LANGUAGE (KEYPAD) SP/PT EN/FR
C.C.I. CALL ON OFF
SELFSTARTING ON OFF
PANEL MAIN SLAVE
SCHEMATIC
REPRESENTATION
CODIFICACIN DE MODULO DE CONTROL
REPRESENTACIN
ESQUEMTICA
ON
1 2 3 4 5 6 7 8
4 3 2 1 L C A P
1
4
CDIGO
34ON
21
2
3
A P
7 85 6
CL
4 3 2 1: (1,2,3,4), cdigo de placa de calle
C: (6), LLAMADA A CENTRAL: ACT DES
A: (7), AUTOENCENDIDO: ACT DES
P: (8), PLACA: PRINCIPAL SECUNDARIA
MODULE OF CONTROL CONFIGURATION
Panel code
L: (5), IDIOMA (TECLADO): ES/PT IN/FR LANGUAGE (KEYPAD) SP/PT EN/FR
C.C.I. CALL ON OFF
SELFSTARTING ON OFF
PANEL MAIN SLAVE
SCHEMATIC
REPRESENTATION
MDULO
CONTROLCONTROL
MODULE
MDULO
CONTROLCONTROL
MODULE
DISTRIBUCIN DE VIDEO(Ver pginas 28 y 29)
VIDEO DISTRIBUTION(See pages 28 and 29)
DISTRIBUCIN DE VIDEO(Ver pginas 28 y 29)
VIDEO DISTRIBUTION(See pages 28 and 29)
Tecl
ado
Vide
o -
Fon
aVI
DEO
COA
X
22
ABREPUERTASDOOR RELEASE
La instalacin con placas de teclado esexactamente igual que con placas depulsadores. Solamente cambia el modelode mdulo de control.
654
1 2 3
7 8 9
C 0
The keypad installationi s t h e s ame a spushbutton system, onlywe have to change themodule of contro lreference
ABREPUERTASDOOR RELEASE
ABREPUERTASDOOR RELEASE
BATERIABATTERY
Max. AVANTLlamada Simul.
Same call
Max. AVANTLlamada Selec.Diferent call
ATF-98
ALV-3.5A 4
2 8
35
Dos puertas de acceso (Hasta 16 accesos)/2 Accesses (Up to 16 accesses)
HASTA/UP TO100 M.
SECCIONESW. SECTIONS
HASTA/UP TO200 M.
Alim. SEPARADASEPARATE Supply( (
EL CABLEADO NO DEBE PASAR CERCA DE LA LINEA ELCTRICATHE WIRING MUST NOT BE RUN CLOSE TO THE ELECTRICAL LINE
1.5 mm (AWG15)1 mm (AWG17)
0.5 mm (AWG20) 1 mm (AWG17)T
*The power supply unit ALV-DIGITAL 3.5A does not give A/Ccurrent (R-C). So it has to be installed with and ATF-12 powersupply unit to release the electrical strike & to light the cardholder
ATF-98 10
MAX. MAX.
20ALV-3.5A + ATF-12* 4080
*El ALV-3.5A no suministra corriente alterna(R-C) por lo que se debe instalar junto a un ATF-12 paraaccionar el abrepuertas y la iluminacin de los tarjeteros.
Dos puertas de acceso (Hasta 16 accesos)/2 Accesses (Up to 16 Accesses)
DISTRIBUCIN DE VIDEO(Ver pginas 28 y 29)
VIDEO DISTRIBUTION(See pages 28 and 29)