Sensores Ambientales
Multiparamétricas
Turbidez
Conductividad
Amplia variedad de sensores para el análisis del agua
Monitorización en continuo consistema de adquisición de
datos.
Serie SA 8000 con registro de 8canales (nivel, temperatura,
conductividad, pH, redox, turbidez,oxígeno disuelto, hora y fecha)
Serie SA 8100 4 canales (nivel,temperatura, conductividad, pH)
Control calidad de aguamediante multiparamétrica y PC.
Medida de la turbidez porsistema NTU, hasta 4000 NTU
Conjunto controlador y sondacon sistema de autolimpieza
por aire comprimido.
Sensores y accesorios para lamedida de bajos niveles de
turbidez (< 4 NTU), conresolución de 0,001 NTU.
Método de medidaNefelométrico, con sensor IR
Sensor TU 810
Sensor TU 8182 conautolimpieza
Con 20 modelos de sondas se pueden cubrir todo tipo demedida en canales, ríos, pozos, tuberías, etc...
Modelos para aguas muy puras, alta temperatura y presión.
Sensores con amplificador incorporado con señal de salida aproceso.
Amplia gama desensores con
electrodos ( 2 ó 4) ypor inducción.
Serie TS con salida 4...20 mA
Accesorio TU 910
GUEMISA Sta. Virgilia 29 - local 28033 Madrid Tfno.: 91 7642100 Fax.: 91 7642132Email: [email protected]
Iones
Ph - Redox
Oxigeno disuelto
Controladores
Equipos portàtiles
Amplia variedad de electrodos,transmisores y controladores.
Sondas en epoxy y cristal.
Modelos con sistemas deautolimpieza.
Serie TS salida 4...20 mA
Disponemos de mas de 25 sensores de ionselectivo, faricados en epoxi y cristal para:
Amoníaco (NH3), Amónio (NH4+), Anidrido carbónico(CO2), Bromatos (Br-), Cádmio (Cd2+), Cálcio (Ca2+),
Cianatos(CN-), Cloratos (CI-), Dureza de agua(Ca2+/Mg2+), Fluoroboratos (BF4-), Flúoratos (F-)Iodatos (I-), Lítio (Li+), Nitratos (NO3-), Óxido de
nitrógeno (NOx), Percloratos (CI O4-), Potásio (K+),Cobre (Cu2+), Sódio (Na+), Tensioactivos (X+, X-)....
Sensores y controladorespara tratamiento de aguas,
piscifactorías, etc....
Sistema de autolimpiezamediante aire comprimido.
Sondas polarográficas.
Gama muy completa de instrumentaciónpara las sondas ambientales.
Controladores de 96 x 96 con microprocesador ycompletamente configurable de manera sencilla.
Indicadores y controladores en formato carril DIN.
Controlador para montaje en rack, con escalasy retransmisión de datos.Serie 7685
Serie 565
Serie 3647
Equipos portátiles para sensores ambientales.
Mediante sondas normalizadas podemos medir pH, redox,temperatura, conductividad, oxígeno disuelto, cloro y ozono
disuelto.
También disponemos de simuladores de señal de electrodosde mV y oxígeno disuelto.
Sondas multiparamétricas
Medida y registro de:
Nivel
Temperatura
Conductividad
pH y redox
Oxígeno disuelto
Fecha y hora
Turbidez (opcional)
Sistema de adquisición de datos portiempo o por nivel.
Sumergible hasta 300 metros.Sensores de fácil sustitución.Transmisión RS485 ó RS232D.
Datos mecánicos
Nivel 0…20,000 m.c.a.0…350,00 m.c.a.
Temperatura -5,00…+55,00 ºCConductividad 0…6,000 mS
0…60,000 mSEscala automática
pH 0…14 pHRedox ± 1100,0 mV.Oxígeno disuelto 0…200,00 mmHg
0…200,00 % de aire0…20.000 ppm0…20.000 mg/l
Transmisión RS485 ó RS232DDatos registro 40.000 datos.Canales 8 canales
6 señales + día +hora
Alimentación Ni/Cd recargable1800 mA/h.12 Vcc (sinregistrador)
Identificación 0…32 sondasAdquisición
programada
Por intervalo detiempoPor intervalo denivel
Longitud
Diámetro
510 mm.70 mm.
Peso 2 Kg. Max.Conector IP68 -100 bar
oceanográficoMaterial PVC
Parámetros de registro
interior sonda
Gracias a la utilización de las últimastecnologías con microprocesadores esposible montar un completo sistema deregistro de señales ambientales.El sistema de registro y el software deprogramación permite almacenar los datos(40.000) en continuo, en tiemposprogramados, o a profundidadesprogramadas.A traves del software SA 8000 y un PC, esposible de una manera sencilla la lectura delos datos en tiempo real, transferir los datosdel data logger y procesarlos, ademaspermite entre otras cosas la calibración delos sensores.
GUEMISA Sta. Virgilia 29 local pos. 28033 Madrid Tfno.: 91 764 21 00 Fax.: 91 764 21 32Email: [email protected] Web: www.guemisa.com
Serie SA 860x.xxx (registro 8 canales)Diámetro 70 mm, con sensor de presión absoluta
SA 8145.10x (4 canales)Diámetro 42 mm, con sensor de presión absoluta
SA 8345.106 (4 canales)Diámetro 42 mm, con sensor de presión relativa
Medida de:
Nivel absoluto
Temperatura
Conductividad
pH.
-Para montar en piezometros de 2”-Sumergible hasta 350 metros-Sensores extraibles-Comunicación RS485
-Para montar en piezómetros de 2”-Sumergible hasta 20 metros-Cable con tubo de venteo-Comunicación RS485
Nivel 0…20,000 m.c.a.0…350,00 m.c.a.
Temperatura -5,00…+55,00 ºCConductividad 0…6,000 mS / 0…60,000 mSpH 0…14 pHTransmisión Serie RS485Alimentación 9…14 Vcc externa 35 mAIdentificación 0…32 sondasPresión max. 30 BarLongitud
Diámetro
470 mm.42 mm.
Peso 2 Kg. Max.Conector IP68 -100 bar oceanográficoMaterial PVC/ AISI316
SA 8145.101:
SA 8145.104:
4 sensores (nivel,temperatura, conductividad, pH),profundidad máxima 20 metros,alimentación y comunicación externa.
4 sensores (nivel,temperatura, conductividad, pH),profundidad máxima 350 metros,alimentación y comunicación externa.
SA 8345.106: 4 sensores (nivel,temperatura, conductividad, pH),profundidad máxima 20 metros,alimentación y comunicación externa.El cable dispone de tubo de venteo paracompensar las variaciones de la presiónatmosférica.
SA 8000:
SA 9491:
BC 8582:
Software para PC, almacenamiento de datos en tiempo real, calibración de lossensores, toma de datos por tiempo o por nivel, gráficos y análisis de los datos.
Cable de 5 metros para interconexión de las sondas a PC, con convertidor deRS485 a RS232.
Cargador automático de baterías, alimentación 220 Vac
Sondas multiparamétricas
Medida de:
Nivel relativo
Temperatura
Conductividad
pH.
Conductividad 0….4.000 mS (autorrango)0…. 60.000 mS (autorrango)
Temperatura -5,00…+55,00 ºCCoeficiente de temperatura 0…3,50% /ºCTemperatura de referencia 10….30 ºCTransmisión Serie RS485Alimentación Externa 12 VccIdentificación 0…32 sondasPresión max. 60 BarLongitud
Diámetro
305 mm.40 mm.
Peso 1,1 Kg. Max.Conector IP68 -100 bar oceanográficoMaterial PVC/ AISI316
Sondas multiparamétricas
Medida de:
Temperatura
Conductividad
SA 8126.1xxDiámetro 40 mm
SA 8126.105:
SA 8126.160:
Con 1 conector, máximaprofundidad 600 metros.
Con 2 conectores parapermitir la comunicación de variossensores en red, máxima profundidad600 metros
Sensores sumergibles para la medidade conductividad y temperatura contransmisión digital.El modelo SA 8126.160, con sus dosconectores permite conectar hasta32 sensores en red, con elconsiguiente ahorro de cable.
SA 8000Software para PC Permite entre otras las siguientes funciones:
Conexión en red de los sensoresTransmisión inmediata de los datos y mensajes enpantallaAlmacenamiento e impresión de los datosCalibración de los sensoresProgramación del modo de registro (por nivel o tiempo)Transferencia de los datos del data logger del sensorAnálisis de datos y gráficos.
Sondas multiparamétricas
Monitorización en tiempo realde los valores del agua
mediante PC y el software SA8000.
Mediante el cable SA 9491,convierte la señal RS485 aRS232 para puerto serie.
Volcado de los datosregistrados de el data logger
interno.
SA 8060.101:
SA 8060.104:
SA 8065.101:
SA 8065.104:
091.181:
6 sensores, profundidad máxima 20metros, data logger y batería interna.CON
6 sensores, profundidad máxima 350metros, data logger y batería interna.
6 sensores, profundidad máxima 20metros, data logger y alimentación y comunicaciónexterna.
6 sensores, profundidad máxima 350metros, data logger, alimentación y comunicaciónexterna.
Sensor de turbidez (OPCIONAL), rango0...4000.0 NTU
CON
SIN
SIN
Red de hasta 32 sensorescomunicados por RS485 yconectados al PC mediante
convertidor a RS232
Sistema control y registromediante transmisión GSM o radio
de hasta 32 equipos.
GUEMISA Sta. Virgilia 29 local pos. 28033 Madrid Tfno.: 91 764 21 00 Fax.: 91 764 21 32Email: [email protected] Web: www.guemisa.com
SENSORES DE TURBIDEZ
Sensor para la medida de la
turbidez en LINEA
Método nefelométrico (luz I.R.)
Cable hasta 100 metros con conector IP68Preamplificador incorporado.
TU 810 en PVCTU 8105 en PVDF
Datos mecánicos
Rango 0…4000 NTUResolución 0,001 en 0…4,000 NTU
0,01 en 0…40,00 NTU0,1 en 0…400,0 NTU1 en 0…4000 NTU
Precisión ± 5% en escala 0…400 NTU± 10% en escala 0…4000NTU
Tiempo de
respuesta
10 segundos
Método de
medida
Nefelométrico (ISO 7027 –EN 27027)
Fuente de luz LED I.R. 890 nmPreamplificador IncorporadoAlimentación ±12 Vcc (indicador TU 7685)Temperatura
de trabajo
0…50 ºC
Presión max. 6 bar
Diámetro 40 mm.Material
ventana
Acrílico
Conector IP68 -100 baroceanográfico
Material TU 810 PVCTU 8105 PVDF
Junta NBR (nitrilo)
Características técnicas
GUEMISA Sta. Virgilia 29 local pos. 28033 Madrid Tfno.: 91 764 21 00 Fax.: 91 764 21 32Email: [email protected] Web: www.guemisa.com
TU 810 - TU 8105
TU 910
Accesorio para TU 810 y
TU 8105 para medida en
línea.
Uso Medida en líneaCaudal 0,2…25 l/minTemperatura 0…50 ºCPresión 6 bar max.Material PVCConexión sensor 2 ½” (DN 50)Conexión caudal ¼”
Diseñado para las sondas TU 810 y TU8105.
Adecuado para la medida de turbidezcon bajos caudales y valores.
Diseñado para evitar la formación deburbujas de aire.
Fácil limpieza y calibración.En el suministro se incluye adaptador1892702 y junta NBR 2713118 para
una sencilla instalación.TU 7685
Controlador para sensoresde turbidez , permite
funcionamientoautomático o manual,
salidas analógicas,funciones de alarma,
limpieza, etc...
TU 8182Sensor de turbidez sumergible con sistema deautolimpieza
GUEMISA Sta. Virgilia 29 local pos. 28033 Madrid Tfno.: 91 764 21 00 Fax.: 91 764 21 32Email: [email protected] Web: www.guemisa.com
SENSORES DE TURBIDEZ
Sensor sumergible para la
medida de la turbidez
Con sistema de autolimpieza
El sensor TU 8182 ha sido especialmentediseñado para el funcionamiento sumergido
y dispone de un sistema de autolimpiezapor aire.
El controlador TU 7685 suministra laalimentación al sensor y programa los
ciclos de limpieza.
Rango 0…4000 NTU0…10000 PPM (mg/l)
Resolución 0,001 en 0…4,000 NTU0,01 en 0…40,00 NTU0,1 en 0…400,0 NTU1 en 0…4000 NTU
Precisión ± 5% en escala 0…400 NTU± 10% en escala 0…4000NTU
Tiempo de
respuesta
10 segundos
Método de
medida
Nefelométrico (ISO 7027 –EN 27027)
Fuente de luz LED I.R. 890 nmPreamplificador IncorporadoAlimentación ±12 Vcc (indicador TU 7685)Temperatura
de trabajo
0…50 ºC
Presión max. 6 barSumergible Hasta 25 metrosPresión aire 3 bar max.
Características técnicas
Datos mecánicos
Diámetro 40 mm.Material
ventana
Acrílico
Cable 7,5 metros (opcional otraslongitudes)
Material PVCAutolimpieza IncorporadoMontaje Para tubo 1”Conexión aire ¼” I/E 3/8”
Controlador TU 7685 montado concompresor de aire
Sugerencia de montaje
El conjunto formado por el sensor TU 8182 yel controlador TU 7685, permite controlar demanera continua la turbidez en depósitos,canales y pozos.
Elección de escala por el usuario en MTU oPPM (mg/l) de SiO2.
El método de medida es Nefelométrico(basado en el efecto Tyndall), se hace
,
.
1 unidad nefelométrica de turbidez (NTU) =7,7 ppm de SiO2
Mediante la toma de aire es posible lalimpieza de la lente de una manera eficaz ydesatendida.
Preparado para ser montado en tubosestándar de 1”.
pasarun rayo de luz a través de la muestra semide la luz reflejada por las partículas en unángulo de 90º con respecto al rayo incidente
CONTROLADOR DE TURBIDEZ
Controlador para sensores de
turbidez
Escala seleccionable, operación
manual o automática
Entrada para sensores TU 810 - TU 8105 -TU 8182
Escalas seleccionables (NTU, mg/l de SiO ) yautoescalables
Filtros por softwareDisplay LCD retroiluminado
2
GUEMISA Sta. Virgilia 29 local pos. 28033 Madrid Tfno.: 91 764 21 00 Fax.: 91 764 21 32Email: [email protected] Web: www.guemisa.com
TU 7685
Sensores Admite TU 810 - TU 8105 – TU8182
Modo de
operación
Manual / automático
Unidades de
medida
NTU - mg/l - PPM
Rango 4…400 NTU / 40…4000 NTU9…999 / 99…9999 PPM de SiO2
9…999 / 99…9999 mg/l de SiO2
Resolución 0,05 % de la escalaCero del
sensor
0,0… 10 % f.e.
Sensibilidad 80,0…120,0 %Alarmas On / off por reles
Bajo / alto ajuste en toda laescala
Histéresis 0…10 % de la escalaRetardo reles 0,0… 99,9 seg.Potencia reles 5A / 220 VacSalida
analógica
0…20 mA / 4…20 mAaislada ( R.max.600 ohm)Opción 2ª salida (091.3713)
Salida digital Opción (RS232 o RS485)Alimentación 85…285 Vac 5VA max.
9…36 Vcc y 9…24 VacAislamiento 4000 V (IEC 348)Dimensiones 96 x 96 x 155 mm (1/4 DIN)
Características técnicas
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
Escalas seleccionables0...4,000 / 0...40,00 / 0...400,0 / 0...4000NTU0...10,00 / 0...100,0 / 0...1000 / 0...10.000mg/lt de SiO
AutoescalaFiltros por softwareModo de uso manual o automáticoDisplay LCD retroiluminado (16 caracteres)Protección de sobrecarga y reset
Salida analógica programable 0/4...20 mAaislada2 alarmas por relé on / off, con histéresis
ajustable y retardoAlarmas para min /max turbidez, lente sucia,
sensor sin agua, luz exterior demasiado altaChequeo de señal para limpieza de la lente
Relé para sistema de autolimpieza, con ciclosde limpieza
3 niveles de acceso a programación:calibración, configuración y parámetros deproceso.Menús de programación de fácil usoBloque de regletas para conexión extraibles
Montaje en panel 96 x 96Alimentación universal 85...285 Vac / 9...36
Vcc / 9...24 Vac (aislamiento 4000 V)
Salida opcional RS232 / RS485
2
Accesorio TU 910
Sensor TU 810
Sensor TU 8182
SENSORES DE CONDUCTIVIDADTABLA DE SELECCIÓN
MODELO CONSTANTE
CÉLULA
MATERIAL
SENSOR
MATERIAL
CUERPO
RANGO
TEMP. ºC
DIMENSIONES
L X Ø en mm.
PRESIÓN APLICACIÓN
RANGO
USO CONTROLADORES
INDICADORES
SI 301 K=1 2 electrodos316 inox
PVC 0…40 Rosca 1” BSPConector
Max 3 bar De 0…2mS Tuberías C3655 / C3630C7685
SI 3013 K=1 2 electrodos316 inox
POLIPROP. 0…50 Rosca 1” BSPConector
Max 3 bar De 0…2mS Tuberías C3655 / C3630C7685
SI 308T K=0.01 +Pt100
2 electrodos316 inox
PVC 0…50 Rosca 1” BSPCable
Max 3 bar Desde 200,0nS
Aguasultrapuras
C7685.001
SZ 3320.1 K=0.1 +Pt100
2 electrodos316 inox
PEEK 0…205 Rosca ¾ NPTConector
Max 16 bar Desde 2000,0nS
Aguasultrapuras
C7685.001C7615.10
SZ 3330.1 K=1 + Pt100 2 electrodos316 inox
PEEK 0…205 Rosca ¾ NPTConector
Max 16 bar Desde 20 µS Aguasultrapuras
C7685.001C7615.10
SAN 621 K=0.1 +Pt100
2 electrodos316 inox
PEEK 0…121 Tri-Clamp 2”Conector
Max 6 bar Desde 2000,0nS
Agua puraInd. Farmac.
C7685.001C7615.10
SZ 3300.1 K=1 + Pt100 2 electrodosGrafito
PES 0…150 Rosca ¾ NPTConector
Max 16 bar De 200 µShasta 200 mS
Líquidoscontaminados
C3655 / C3630C7685
SC 5 K=1 + NTC10KOHM
2 electrodosTitanio
Inox AISI316
0…100 Rosca ¾ NPTConector
Max 5 bar 0…20 mS TuberíaLiq. Contamin.
C3655 / C3630C7685
SI 311 K=1 + Pt100 4 electrodos316 inox
POLIPROP. 0…80 Rosca 1” BSPCable
Max 3 bar De 200 µShasta 200 mS
TuberíasInmersión
TRANSMISORES080310
SZ 312.4 K=0,7 + NTC10KOHM
4 electrodos316 inox
PVDF 0…80 Rosca ½ ” BSPCable
Max 3 bar De 200 µShasta 200 mS
TuberíasInmersión
C3645
ST 311 K=1 + Pt100 4 electrodos316 inox
POLIPROP. 0…80 Rosca 1” BSPConector
Max 3 bar 0… 2000 mS Tuberías C7685 / C565.2
ST 31011 K=1 + Pt100 4 electrodos316 inox
PVDF 0…100 DN 25Conector
Max 3 bar 0… 2000 mS TuberíasInmersión
C7685 / C565.2
SI 315SI 315.1
K=1 + Pt100 Inductivo PVDF 0…110 DN 40Cable
Max 3 bar De 2000 µShasta 20 S
QuímicoAlimenticio
Trans. 080315C3655
ST 315 K=1 + Pt100 Inductivo PVDF 0…110 DN 40Conector
Max 3,5 bar De 2000 µShasta 20 S
QuímicoAlimenticio
C7685 / C565.2
ST 315.21 K=1 + Pt100 Inductivo PVC 0…40 Rosca 1”Cable
Max 3,5 bar De 2000 µShasta 20 S
Sumergible Con Trans. 080315C7685 / C565.2
ST 3254.X K=1 + Pt100 Inductivo PVC 0…50 Rosca 1½”MNPtCable
Max 10 bar 4 modelos(0…200 mS)
TuberíasInmersión
Bucle 4…20 mA
TS 280 K=1 + Pt100 Inductivo Inox AISI316
0…50 Sumergible50m. Cable
Max 10 bar 2 modelos0..20 / 50 mS
SumergiblePozos
Bucle 4…20 mA
SENSORES DE CONDUCTIVIDAD
Sensor sumergible para la medida de bajos niveles de
conductividad - salinidad
Mediante electrodos de titanio, salida 4...20 mA
Rango 0…200 / 0…2000 / 0…20000 µS
Linealidad ± 1%Señal de salida 0…4 Vcc
0/4… 20 mAAlimentación 9…16 VccTemperatura de
trabajo
-0 ºC…+50 ºC
Material cuerpo Acero inoxidable AISI 316Material sensor 2 electrodos de titanioCable De polietileno 15 metros
Otras longitudes bajo pedidoDimensiones Longitud 270 mm.
Diámetro 38 mm
GUEMISA Sta. Virgilia 29 local pos. 28033 Madrid Tfno.: 91 764 21 00 Fax.: 91 764 21 32Email: [email protected] Web: www.guemisa.com
2 electrodos
Este sensor sumergible hasta 20 m. de profundidad, permite la medición precisa de laconductividad, por medio de electrodos de titanio para bajos rangos.El cuerpo que contiene la electrónica está construido en acero inoxidable AISI 316, y poseeuna salida de 0-4V ó 4-20 mA. Su baja tensión de alimentación, los hace apto para operar conPLC, datalogger, RTU, etc.Un termistor alojado dentro de la cápsula permite la compensación de la conductividad con latemperatura.
Modelo TS 282
Serie SZ 33xxRangos SZ 3320.1 : 20 µS…20 mS
SZ 3330.1 : 200 µS…200 mSSZ 3300.1 : 200 µS…200 mS
Constante célula K cm-1 = 0,1 y 1Material Inox AISI 316Electrodos SZ 3320.1 : PEEK (polímero)
SZ 3330.1 : PEEK (polímero)SZ 3300.1 : Grafíto
Temperatura de
trabajo
SZ 3320.1 : 250 ºC max.SZ 3330.1 : 250 ºC max.SZ 3300.1 : 150 ºC max.
Rosca ¾” NPTPresión 16 bar max. a 25 ºCSensor temp. Pt100
Sensores para muyalta temperatura,
montaje en tuberíaCon compensación de
temperatura Pt100
Para altas temperaturas
Modelo SAN 621-3-1-5SRango 200 µS… 200 mSConstante célula K cm-1 = 1 ( max. 200 mS)
Material Inox AISI 316Electrodos 2 PEEK (polímero)Temperatura de
trabajo
Hasta 150 ºC max. a 10 bar
Rosca Tri-Clamp 2”Presión 16 bar max. a 20 ºCSensor temp. Pt100Conector 4 polos
Para industria farmacéutica
Sensor para aguas puras,montaje tubería, admite
esterilizaciónCon compensación de
temperatura Pt100
SZ 3320.1SZ 3330.1
SZ 3300.1
SENSORES DE CONDUCTIVIDAD
Modelo SI 301
SI 3013
2 ELECTRODOS
Rango 0…2 mSConstante célula K cm-1 = 1 (max. 20mS)Material SI 301 (PVC)
SI 3013 (Polipropileno)Electrodos 2 de inox, AISI 316Temperatura de
trabajo
-10 ºC…+50 ºC
Rosca 1” BSPPresión 3 bar max. a 25 ºC
Sensores diseñados parala medida de bajos valoresde salinidad, montaje en
tubería y bajo coste.
Modelo SI 308T
Rango 0…20 µSConstante célula K cm-1 = 0,01 ( max. 200 µS)
Material PVCElectrodos 2 de inox, AISI 316Temperatura de
trabajo
-10 ºC…+50 ºC
Rosca 1” BSPPresión 3 bar max. a 25 ºCSensor temp. Pt100
Sensor para la medida demuy bajos valores desalinidad (0...20 S),montaje en tubería
Con compensación detemperatura Pt100
µ
Para baja salinidad
Para aguas muy puras
Conexión directa atodos los
controladores
C 7685 c 565.2 C 3630 C 7615.010
SZ 3271:
SZ 3273.1:
SZ 3274.1:
SZ 3273.4:
Dos electrodos de grafito, K=1 cm-1, cuerpo en epoxy, longitud del cuerpo 110mm, diámetro 12 mm, cable de 1,5 metros con conector BCN.
Dos electrodos de grafito, K=1 cm-1, cuerpo en epoxy, longitud del cuerpo110 mm, diámetro 12 mm, cable de 3 metros, con sensor Pt100.
Dos electrodos de grafito, K=1 cm-1, cuerpo en epoxy, longitud del cuerpo110 mm, diámetro 12 mm, cable de 5 metros, con sensor Pt100.
Dos electrodos de grafito, K=1 cm-1, cuerpo en epoxy, longitud del cuerpo110 mm, diámetro 12 mm, cable de 3 metros, con sensor NTC 10 Kohm
Serie SZ 327x
Para conducto, presión máxima 10 bar y 80 ºC, rango: 0....80mS.
SC-5: Dos electrodos de titanio, K=1 cm-1, rango 0...20 mS,cuerpo en inox AISI 316, longitud del cuerpo 86 mm, rosca 3/4NPT, conector, con sensor NTC 10 Kohm, presión máxima 5 bar.
SENSORES DE CONDUCTIVIDAD
Para instalar directamente a proceso, en extensiones de
tuberías, para aplicaciones en inmersión o cámaras de
caudal
Conexión a microtransmisor o controlador
GUEMISA Sta. Virgilia 29 local pos. 28033 Madrid Tfno.: 91 764 21 00 Fax.: 91 764 21 32Email: [email protected] Web: www.guemisa.com
4 ELECTRODOS
Rango Hasta 20 mSConstante célula K cm-1 = 1 (max. 20mS)Material PolipropilenoElectrodos 4 de inox, AISI 316Temperatura de
trabajo
Máximo 80 ºC
Rosca 1” BSPPresión 3 bar max. a 25 ºCSensor de
temperatura
Pt100
Cable 3 metrosControlador (Microtransmisor 080310
+ controlador C7685)C 3630
Modelo SI 311 De aplicación general
Conexión directaal controlador
C3630
+ oConexión a traves del microtransmisor080310 a los controladores C 7685 ó C
565.2
Rango Hasta 20 mSConstante célula K cm-1 = 0,7Material PVDFElectrodos 4 de inox, AISI 316Temperatura de
trabajo
Máximo 80 ºC
Rosca ½” BSP posteriorPresión 3 bar max. a 25 ºCSensor de
temperatura
NTC 10 Kohm
Cable 3 metrosControlador C 3645
Modelo SI 312.4 Para tubería o sumergible
Conexión directaal controlador
C3645
SZ 3252: TRES electrodos en banda de platino negro, K= 1 cm-1, cuerpo deepoxy, cable de 1,5 metros con conector BNC
Equipos portátiles y laboratorios.Aplicación en:
GUEMISA Sta. Virgilia 29 local pos. 28033 Madrid Tfno.: 91 764 21 00 Fax.: 91 764 21 32Email: [email protected] Web: www.guemisa.com
SENSORES DE CONDUCTIVIDAD4 ELECTRODOS
Rango Hasta 2000 mSConstante célula K cm-1 = 1 (max. 2000mS)Material PolipropilenoElectrodos 4 de inox, AISI 316Temperatura de
trabajo
Máximo 80 ºC (sensor)40 ºC microtransmisor
Rosca 1” BSPPresión 3 bar max. a 25 ºCSensor de
temperatura
Pt100
Cable Conector con cableSZ 9481 (10 metros)SZ 9483 (30 metros)
Longitud 210 mm (opción otrasmedidas)
Modelo ST 311 Instalación en tubería
Modelo ST 31011 Para sector alimentario
Conexión directa atodos los
controladores
C 7685 c 565.2 C 3630 C 7615.010
Rango Hasta 2000 mSConstante célula K cm-1 = 1 (max. 2000mS)Material PVDFElectrodos 4 de inox, AISI 316Temperatura de
trabajo
Máximo 100 ºC (sensor)40 ºC microtransmisor
Rosca DN 25Presión 3 bar max. a 25 ºCSensor de
temperatura
Pt100
Cable Conector con cableSZ 9481 (10 metros)SZ 9483 (30 metros)
Longitud 210 mm (opción otrasmedidas)
SENSORES DE CONDUCTIVIDAD
Sensores para la medida de altos niveles de
conductividad - salinidad
Tecnología inductiva
Rango 0…20 mS / 0…50 mSLinealidad < ± 1%Señal de salida 0…4 Vcc
0/4… 20 mAAlimentación 9…16 VccTemperatura de
trabajo
-0 ºC…+50 ºC
Material cuerpo Acero inoxidable AISI 316Material sensor Inductivo, sin electrodosCable De polietileno 15 metros
Otras longitudes bajo pedidoDimensiones Longitud 325 mm.
Diámetro 38 mmToroide 58 mm
GUEMISA Sta. Virgilia 29 local pos. 28033 Madrid Tfno.: 91 764 21 00 Fax.: 91 764 21 32Email: [email protected] Web: www.guemisa.com
Modelo TS 280
INDUCTIVOS
Sensor hasta 50 m. de profundidad, permite la medición precisa de laconductividad, por metodos inductivos, para rangos medios y altos. Construido en aceroinoxidable AISI 316, posee una salida de 0-4V ó .Dispone de sensor de temperatura para compensación.
sumergible
4-20 mA
Rango ST 3254.1=0…10mSST 3254.2=0…100 mSST 3254.3=0…1000 mSST 3254.5=0…200 mS
Linealidad < ± 1%Presión Max. 10 barToma a proceso Sumergible
1 ½” MNPR (las dos roscas)Temperatura de
trabajo
-0 ºC…+50 ºC
Material cuerpo PVC-CMaterial sensor Inductivo, sin electrodosConexión Cable 3 metrosDimensiones Longitud 207 mm.Señal de salida 4…20 mA (600 ohm a 24Vcc)
Modelo ST 3254.x Para tubería o sumergible
Control de laconductividad, señal de
salida 4...20 mA, diseñadopara su uso en tubería o
sumergido.Muy buena relación
calidad precio.Al no disponer de
electrodos sumantenimiento es casinulo y no se produce elnatural deterioro de los
electrodos.
Una célula de medición inductiva consiste en dos bobinas, una transmisora y otrareceptora. Ambas bobinas se montan una junto a la otra . La zona de las bobinas sesumerge en el líquido y este pasa a través de los agujeros de las bobinas toroidales. Acontinuación se aplica una tensión alterna sinusoidal a la bobina transmisora. Estoproduce una corriente en el fluido proporcional a su conductividad. A su vez, estacorriente induce una tensión en la bobina receptora. La conductividad se determinamidiendo esta segunda tensión y conociendo la constante de la célula. El sistemaintegra también un sensor de temperatura que permite aplicar correcciones detemperatura.
Al no existir contaminación ni polarización de electrodos, la lectura es mas fiable yprecisa.
Para uso en pozos, canales y rios
GUEMISA Sta. Virgilia 29 local pos. 28033 Madrid Tfno.: 91 764 21 00 Fax.: 91 764 21 32Email: [email protected] Web: www.guemisa.com
SENSORES DE CONDUCTIVIDADINDUCTIVOS
Modelo ST 315.21
Rango 20 mS…40 SMaterial PVCElectrodos Inductivo, sin electrodosTemperatura de
trabajo
40 ºC max.
Rosca Posterior 1”Presión 3 bar max. a 25 ºC (IP68)Sensor temp. Pt100Conexión 3,5 m*. de cable al
microtransmisor 080315Coeficiente
temperatura
+ 0,3% / ºC del líquido
Para instalar sumergido
Sensor inductivo para altos valores de conductividad (max. 20 S)Con compensación de temperatura Pt100
* Opción con 10 y 30 metros de cable y conector IP67 para el cable
Modelo ST 315Rango 2000 µ…20 SConstante célula K cm-1 = 1Electrodos Inductivo, sin electrodosTemperatura de
trabajo
110 ºC max. a 1 bar
Rosca DN40 (con accesorio SZ 724)Presión 3,5 bar max. a 25 ºC (IP68)Sensor temp. Pt100Conexión SZ 9481 10 m. cable + conector
SZ 9483 30 m. cable + conector
Dimensiones Longitud 255 mmDiámetro 34 mm
Material PVDF, contacto con el líquido
Sector alimentación, galvanización
Modelo SI 315Rango 2000 µ…20 SConstante célula K cm-1 = 1Electrodos Inductivo, sin electrodosTemperatura de
trabajo
110 ºC max. a 1 bar
Rosca DN40 (con accesorio SZ 724)Presión 3,5 bar max. a 25 ºC (IP68)Sensor temp. Pt100Conexión Cable 3 metrosDimensiones Longitud 200 mm
Diámetro 34 mmMaterial PVDF, contacto con el líquido
Sector alimentación, química
SI 315.1
SI 315
Conexión directaal controlador
C3655
Conexión directa a loscontroladores C 7685 ó C
565.2
Conjunto formado por el sensor SI 315 y el microtransmisor 080315
Conexión directa a loscontroladores C 7685 ó C
565.2
+ oConexión a traves del
microtransmisor 080310a los controladores C
7685 ó C 565.2
SZ 724 Accesoriomontaje DN 40
parasensores SI 315 y
ST 315
SI 315.1
C 7685E.Conductivity controller
Add the following to the common Features/Specificationsof the 7685 Series shown overleaf
• Applications:- deionized water- drinking water- food industry- surface treatment
• Selectable input from:- 2 electrodes- 4 electrodes pre-amplified cell- electrodeless pre-amplified cell
• Scales: from 0.2 mS to 40 Siemens• Autoranging• Conversion in % - gr/l - Bè• Temperature readout• Filter software
• Calibration parameters display• Dual set-point and alarm conditions display• Automatic or manual Temperature compensation• Automatic or manual acquisition of the temperature
compensation table
• Isolated output:- 0/20 mA or 4/20 mA selectable- programmable input on the span
• Automatic or manual operation• Dual Set-point with hysteresis, delay, and min/max
programmable functions
• Alarm:- min/max and delay programmable- on Set-points timing
• Automatic overload protection and reset• Extractable terminal block• 96x96 (1/4 DIN) housing
Specifications
Input* From 2-electrode E.C. cell* From 08310 4-electrode microtransmitter* From 08315 electrodeless microtransmitterFrom RTD Pt100 3 wires
Scales* See tables Scales vs. K* Autoranging: on/off* Indirect scale: on/offZero adjustment: 0/5 %Sens. adjustment: 60/160 %* Temp. reference: 10/99 °C* Table /coeff. ATC selection* ATC coefficient: 0/5 %/°C* Software filter 90% RT: 0.4/50.0 sDisplay resolution: 1/1000 at 20 °C
TemperatureInput: RTD Pt100 2/3 wires connectionMeasuring and compensation range: -10/+110 °CResolution: +/- 0.1 °CZero adjustment: +/- 1 °CManual Temp. comp: -10/+110 °C
OptionsThe following options are available:091.3713 dual analog programmable and isolated output.
The operator may select an output for Temperature.091.701 RS232 isolated output.
The output sends the data (E.C., °C) to the serial portfof the computer.
091.404 24 Vac power supply
An option dual line display for E.C. and temperature readout isavailable on request.
The technical specifications may be changed without notice
SENSORES DE CONDUCTIVIDADControladores
C 7685.001E.Conductivity - Resistivity controller
Add the following to the common Features/Specificationsof the 7685 Series shown overleaf
• Applications:- high purity water- micro electronics industry- electroplating- pharmaceutical industry
• Scales in nS and Mohm• Autoranging• Temperature readout• Filter software
• Calibration parameters display• Dual set-point and alarm conditions display• Automatic or manual Temperature compensation• Table of high purity water stored into the microcomputer• Isolated output:
- 0/20 mA or 4/20 mA selectable- programmable input on the span
• Automatic or manual operation• Dual Set-point with hysteresis, delay, and min/max
programmable functions
• Alarm:- min/max and delay programmable- on Set-points timing
• Automatic overload protection and reset• Extractable terminal block• 96x96 (1/4 DIN) housing
Input from 2-electrode cells
Accessories
See SI 308T, SZ 3320.1, SZ 3330.1 probes
K cm -1 0,01 0,10 1,00 10,0
Range 200nS 2000nS 20,00µS
200,0nS 2000nS 20,00µS 200,0µS
2000ns 20,00µS 200,0µS 2000µS
20,00µS 200,0µS 2000µS 20,00mS
Specifications
Operating modeAutomatic/Manual
E.C. Cells* K = 0.01/0.10/1.0/10 cm-1
* Input scales: 200.0 nS/20.00 mS (see table)readout in Mohm
* Autoranging: ON/OFFZero adjustment: +/- 10 %Sens. adjustment: 60/160 %
* Temp. reference: 10/25 °C* ATC coefficient: 0/3.50 %/°C* Software filter 90%RT: 0.4/50.0 sDisplay resolution: 1/1000 at 20 °C
TemperatureInput: RTD Pt100 2/3 wires connectionMeasuring and compensation range: 0/+100 °CResolution: +/- 0.1 °CZero adjustment: +/- 2 °CManual Temp. comp: 0/100 °C
OptionsThe following options are available:091.3713 dual analog programmable and isolated output.
The operator may select an output for temperature.091.701 RS232 isolated output.
The output sends the data (E.C., °C) to the serial port ofthe computer.
091.404 24 Vac power supply
An option dual line display for E.C. and temperature readout isavailable on request.
The technical specifications may be changed without notice
SENSORES DE CONDUCTIVIDADControladores
SENSORES DE CONDUCTIVIDADControladores
C 565.2Conductivity controller
• Input 2-electrodes cell4-electrodes preamplified cellelectrodeless preamplified cell
• Selectable scales• Temperature and Temperature Coefficient display• Manual and automatic Temperature compensation
General informationsThis instrument presents all the advantages of a modern and reliablemeasurement of electrical conductivity in industrial plants.In just this one instrument there are all the conductivity ranges necessaryto undertake measurements in ultra-pure waters and in solutions with avery high ionic content.It features a scale selector and there are two independent on-off regulatorswith the possibility of selecting the min/max function by rear switches andalso the possibility to insert a delay function for each set-point.The cell factor K may be adjusted over a wide range by means of a coarseand fine control.
It also features the automatic and manual compensation of the temperatureby means of the Pt100 sensor with the display of the temperature coefficientand a digital readout of the solution’s temperature. The controller providesan output of 0/20 or 4/20 mA selectable proportional to the meter reading,for driving a recorder or remote readout having a non-grounded input.A unique characteristic of this instrument is the possibility to connect theConductivity cell for measurement in microSiemens range,the 4-electrodes cell + microtransmitter type 080310 and the electrodelesscell + microtransmitter 080315 for measurement in mSiemens range.
SpecificationsAdd the following to the common Specifications shown overleaf
Input: from conductivity cell (2 electrodes)from microtransmitter mod. 080310 for 4-electrodes cellfrom microtransmitter mod. 080315 for electrodeless cellfrom RTD Pt100
Scales with 2-electrodes cell installed: 0/1.999 0/19.990/199.9 0/1999 microSiemensScales with 080310 or 080315 microtrasmitter installed:0/1.999 0/19.99 0/199.9 0/1999 milliSiemensTemperature readout: 0/100.0 °COperating Frequency: 200 Hz 800 Hz 4.500 Hz selectableTemp. compensation: manual and automatic 0/100 °CTemp. Coefficient: 0 to 5.5 %/°CTemperature sensor: RTD Pt 100K adjustment: 0 to 2 (coarse)
C 125.2E.ConductivityTemperature meter
� High accuracy and reliability� LCD display� Temperature visualization� Automatic or manual Temperature compensation� Temperature coefficient visualization� Corrosion resistant
This instrument is designed for field applications in waste water, swimmingpools, chemical, electroplating and food industries.By pressing any key the instrument will switch on or will extend theoperation for about 5 minutes.
The Temperature compensation on the E.C. readout is automatic ormanual. The operator may select the temperature coefficient for thecompensation.The zero and sensitivity adjustment allows a very accurate calibration ofthe meter.
The plastic case with the policarbonate membrane provide a corrosionresistance in field applications.
Accessories and sensorsto be ordered separatelyBC 921: carrying caseSZ 3252: E.C. sensor, K=1 black platinum electrodesSP 51501 - SP 51511: suggested temperature sensors
Specifications
Display: LCD 3 1/2 digit
Scales: 0/199.9 µS - 1999 µS - 0/19.99 mS - -20.0/+120.0 °C
Zero: adjustable
Sensitivity: adjustable
Input: from 2-electrodes cell, BNC connectors
from Pt1000, jack connector
Power:9 V battery
Battery life: 100 hours operation
Dimensions: 92 x 155 x 33 mm
Weight: 300 g
Portátiles
SENSORES DE CONDUCTIVIDADTransmisores
MICROTRANSMITTERSfor industrial probes
• Suitable for 7685 Series and 565 Series• IP 65 water-tight protection• Water-tight output connector• For immersion and in-line probes• Easy installation and maintenance
080310E. Conductivity microtransmitter
This miniature preamplifier is realised in a water-tight enclosure with awaterproof connector for a shielded 7-wire cable for the transmission ofConductivity and Temperature signals.
Normally, as an input, a four-electrode cell with a temperaturecompensation element is connected, while as an output, the modelsC 7685 or C 565.2 are connected and automatically assume measuringscales in mS.The connection between the microtransmitter and the controller is madeusing a 7-pin waterproof connector (cod. 2231520).
SpecificationsInput: for 4 electrodes cell and Pt 100Conductivity range: 0/20 SAdjustment: zero and sensitivity
AccessoriesSee accessories for 080315.
080315Electrodeless Conductivity microtransmitter
This miniature preamplifier is realised in a water-tight enclosure with awaterproof connector for a shielded 7-wire cable for the transmission ofconductivity and temperature signals.
Normally, as an input, an electrodeless cell model SI 315 with atemperature compensation element is connected, while as an output,the models C 7685 or C 565.2 are connected.By means of this microtransmitter the above standard conductivitycontrollers can be used as electrodeless conductivity controllers andassume measuring scales in mS.
The connection between the microtransmitter is made using a 7-pinwaterproof connector (cod. 2231520).
SpecificationsInput: from electrodeless probeRecommended cable: 7 x 0.25 mm shieldedConductivity range: 0/40 SAdjustment: zero and sensitivity
AccessoryStandard cables with connector are also available:SZ 9481: 2231520 + cable length 10 m (33 feet)SZ 9483: 2231520 + cable length 30 m (100 feet)SZ911 for unfixed mounting
SENSORES DE CONDUCTIVIDADTransmisores
C 3630E.Conductivity Transmitter
• Two wire 4/20 mA Operation• Isolated Current loop output• LCD Display• 3 selectable scales• Accepte 2 or 4 electrodes E.C. cell• Automatic or Manual Temperature Compensation• Temperature Display• Frequency selectable• Decimal point selectable• 10/30 Vdc Power Supply• Direct Connection to PC’s• Din Rail mounting• Detachable terminal block connectors
General informations
The conductivity transmitter incorporates a large LCD display which iseasily readable even from considerable distances.
The transmitter will display temperature values of manual or automaticTemperature compensation devices.
Automatic Temperature Compensation is achieved with use of a 100 ohmplatinum RTD, with temperature coefficient display.
The transmitter is powered by an external power supply from 10 to 30 Vdc.The same two wires which provide power to the transmitter also carry the4/20 mA output conductivity signal.
Zero and sensitivity (span) calibration adjustments are located on the frontpanel and are easily accessible.
The 4/20 mA output is isolated for input into recorders or other devicesrequiring a 4/20 mA input signal.
The input/output isolation also allows input into Personal Computersaccepting 4/20 mA inputs.
A common power supply may be used to power other transmitters withoutinterference from other measurement devices or sensors.
All plastic construction provides maximum resistance to corrosion.
Detachable terminal block connectors and Din Rail mounting provide foreasy field installation.
SpecificationsDisplay: LCD
Inputs: 2-electrodes E.C. cell 4-electrodes E.C. cell
RTD Pt 100 2 or 3 wire
Output: 4/20 mA isolated
Scales: 0/199.9 µS 0/1999 µS 0/19.99 mS -10.0/120.0 °C
Temperature Compensation: manual or automatic
Temperature Compensation Coefficient: 0/4.0 %/°C adjustable
Temperature Compensation Reference: 20 °C
Zero: adjustable ±15%
Sensitivity: adjustable from 86% to 112% narrow range
adjustable 0/160% wide range
Operating Temperature: 0/50 °C
Operating Humidity: 0/95% R.H. non-condensing
Power supply: 10/30 Vdc
Isolation: 500 V input to output
Terminal block: detachable
Net Weight: 200 g
Dimensions: 105 x 95 x 58 mm (6 modules)
Mounting: DIN Rail (35 x 7.5 mm Rail)
The technical specifications could be changed without notice.
3630
+ _
+ _
+
_
10/30 VLOOP SUPPLY DC
LOADS
INDICATORRECORDERCOMPUTER
ALARMS
3630
+
+
+
_
_
_
3630
+ _3630
+ _
+ _10/30 VLOOP SUPPLY DC
LOAD
1
+_
LOAD
1
+_
LOAD
2
SENSORES DE CONDUCTIVIDADTecnología
La conductividad eléctrica, se define como la capacidad que tienen las salesinorgánicas en solución ( electrolitos ) para conducir la corriente electrica.
El agua pura, practicamente no conduce la corriente, sin embargo el agua con salesdisueltas conduce la corriente eléctrica. Los iones cargados positiva y negativamenteson los que conducen la corriente, y la cantidad conducida dependerá del número deiones presentes y de su movilidad.
En la mayoría de las soluciones acuosoas, cuanto mayor sea la cantidad de salesdisueltas, mayor será la conductividad, este efecto continúa hasta que la solución estátan llena de iones que se restringe la libertad de movimiento y la conductividad puededisminuir en lugar de aumentar, dándose casos de dos diferentes concentraciones conla misma conductividad.
Temperatura de la muestra 25 ° C Conductividad, µS/cm
Agua ultrapura 0.05
Agua de alimentación a calderas 1 a 5
Agua potable 50 a 100
Agua de mar 53.000
5 % NaOH 223.000
50 % NaOH 150.000
10 % HCl 700.000
32 % de HCl 700.000
31 % HNO3 865.000
Algunas sustancias se ionizan en forma más completa que otras y porconducen mejor la corriente. Cada ácido, base o sal tienen su curva característica deconcentración contra conductividad.
los ácidos, bases y sales inorgánicas: HCl, NaOH, NaCl,Na CO ....etc.
: Las moléculas de sustancias orgánicas que por la naturalezade sus enlaces son no iónicas: como la sacarosa, el benceno, los hidrocarburos, loscarbohidratos.... etc, estas sustancias, no se ionizan en el agua y por lo tanto noconducen la corriente eléctrica.
Un aumento en la temperarura, disminuye la viscosidad del agua y permite que losiones se muevan más rapidamente, conduciendo más electricidad. Este efecto de latemperatura es diferente para cada ion, pero tipicamente para soluciones acuosasdiluidas, la conductividad varía de 1 a 4 % por cada ° C.Conociendo estos factores, la medición de la conductividad nos permite tener unaidea muy aproximada de la cantidad de sales disueltas.
2 3
esta razón
Son buenos conductores :
Son malos conductores
La conductividad eléctrica es lo contrario de la resistencia en ohms, medida entre las carasopuestas de un cubo de 1.0 cm de una solución acuosa a una temperatura especificada. Estasolución se comporta como un conductor eléctrico donde se pueden aplicar las leyes físicas de laresistencia eléctrica.Las unidades de la conductividad eléctrica son el Siemens/cm ( las unidades antiguas, erán losmhos/cm que son numéricamente equivalentes al S/cm ).En la práctica no se mide la conductividad entre electrodos de 1 cm sino con electrodos dediferente tamaño, rectangulares o cilíndricos, por lo que al hacer la medición, en lugar de laconductividad, se mide la conductancia, la cual al ser multiplicada por una constante ( k ) de cadacelda en particular, se transforma en la conductividad en S/cm.
Conductividad = Conductancia de la muestra * kk = d/A
k: Constante de la celdad: distancia de la separación de los electrodosA: Area de los electrodosAsí, un electrodo de 1 cm de separación y con una
area de 1 cm , tendrá una k = 1
La medición eléctrica se efectúa mediante un puente de Wheastone para medir resistencias.Las resistencias R1 y R2 son fijas y su valor va de acuerdo al intervalo de conductividad que sepretende medir. La resistencia Rx es la que proporciona la solución a la cual se le va a medir laconductividad. La resistencia R3 se varía en forma continua hasta poner en equilibrio el puente, detal forma que no pase corriente hacia el medidor.
3
INTERFERENCIAS EN LA MEDIDASustancias no disueltas o materiales que precipiten lentamente en la muestra, puedencausar ensuciamiento en la superficie de los electrodos y causar lecturas erroneas.El ensuciamiento por sustancias orgánicas, bioensuciamientos y corrosión de loselectrodos, causan lecturas inestables o erroneas.El factor de correlación para obtener los valores cuantitativos de los sólidos totalesdisueltos solo es válido cuando la muestra tiene un pH entre 5 y 8, a valores mayoreso menores de pH, los resultados no serán confiables.
GUEMISA Sta. Virgilia 29 local pos. 28033 Madrid Tfno.: 91 764 21 00 Fax.: 91 764 21 32Email: [email protected] Web: www.guemisa.com
CONDUCTIVIDAD INDUCTIVA
Una célula de medición inductiva consiste en dosbobinas, una transmisora y otra receptora. Ambasbobinas están integradas en un alojamientohueco. El alojamiento se sumerge en el fluido, queinunda su interior. A continuación se aplica unatensión alterna sinusoidal a la bobina transmisora.Esto produce una corriente en el fluidoproporcional a su conductividad. A su vez, estacorriente induce una tensión en la bobinareceptora. La conductividad se determinamidiendo esta segunda tensión y conociendo laconstante de la célula. El sistema integra tambiénun sensor de temperatura que permite aplicarcorrecciones de temperatura.
Muy adecuada para entornos agresivos.
SENSORES DE pHEpoxy y cristal
Robustez y facilidad de manejo, bajomantenimiento, no precisan relleno deelectrolito.Diagrama interno para la protección delelemento de referencia frente acontaminaciones.Disponemos de sensores para todo tipo deaplicación, aguas puras, piscinas, aguas muycontaminadas, equipos portátiles, uso enlaboratorios, alta temperatura y presión,agricultura, etc...
Electrodos pH cuerpo en epoxi
SZ 142:
SZ 145:
SZ 1021:
SZ 1025:
Cable de 1,5 metros con conectorBNC tipo Phoenix 2732526.005B
Aguas limpias, instrumentosportátiles y piscinas.
Cable de 9 metros con conectorBNC tipo Phoenix 2732526.005B
Aguas limpias a temperaturaambiente, uso industrial hasta 7 bar.
Cable de 1 metro con conectorBNC, bajo coste
Equipos portátiles (10 unid.pedido mínimo).
Cable de 9 metros, bajo costeAguas limpias a temperatura
ambiente, uso industrial hasta 7 bar. (10unid. pedido mínimo)
Aplicación en:
Aplicación en:
Aplicación en:
Aplicación en:
Electrodos para pH combinados de vidrio/ referencia gel, en plástico.
SZ 151: Doble combinación, cable de 1,5metros con conector BNC.
Aguas muy contaminadas oalta temperatura.Aplicación en:
SZ 1075: Electrodo de antimonio, cable de9 metros
Líquidos ácidos con HF(requiere controlador pH 7685.010)Aplicación en:
SZ 1131: Sensor pH para pinchar,diafragma de PTFE, cable de 1 metro conconector BNC.
Invernaderos, agricultura.Aplicación en:
SZ 1093: Electrodo pH hidropónico,longitud 85 mm, cable de 3 metros conconector BNC.
Invernaderos, agricultura yuso industrial en línea hasta 7 bar.Aplicación en:
GUEMISA Sta. Virgilia 29 local pos. 28033 Madrid Tfno.: 91 764 21 00 Fax.: 91 764 21 32Email: [email protected] Web: www.guemisa.com
TS 284: Electrodos planos autolimpiantes,longitud 370 mm, diámetro 38 mm, cablede 15 metros, presión máxima 2 bar.
Pozos, canales y depósitosAplicación en:
SumergibleSalida 4...20 mA0....14 pH
SENSORES DE pHEpoxy y cristal
Electrodos pH cuerpo en cristal
Electrodos para pH combinados de vidrio/ referencia gel, cuerpo en cristal.
SZ 161: Combinación cristal/ referencia,cuerpo de cristal, ranura anular, cable de1,5 metros con conector BNC.
Líquidos contaminados,instrumentos portátiles, laboratorio. Presiónen linea hasta 10 bar.
Aplicación en:
SZ 165: Combinación cristal/ referencia,cuerpo de cristal, ranura anular, cable de 9metros.
Uso general, uso industrialhasta 10 bar de presión.Aplicación en:
SZ 160: Combinación cristal/ referencia,cuerpo de cristal, ranura anular, conconector coaxial S7.
líquidos contaminados,instrumentos portátiles, laboratorios.Aplicación en:
SZ 171: Combinación cristal/ referencia,cuerpo de cristal, doble ranura anular, cablede 1,5 metros con conector BNC.
Líquidos contaminados,instrumentos portátiles, uso industrial.Aplicación en:
SZ 173: Combinación cristal/ referencia,cuerpo de cristal, doble ranura anular, cablede 9 metros.
Líquidos contaminados, usoindustrial en linea hasta 10 bar de presión ycondiciones extremas.
Aplicación en:
SZ 191: Combinación cristal/ referencia,cuerpo de cristal, doble ranura anular conGel para alta temperatura, cable de 1,5metros con conector BNC.
Líquidos alta temperatura,OEM.Aplicación en:
SZ 195.1: Combinación cristal/ referencia,cuerpo de cristal, bulbo en cúpula, dobleranura anular, bajo error alcalino, cable de9 metros.
Líquidos contaminados y altatemperatura, uso industrial en linea hasta10 bar de presión y condiciones extremas.
Aplicación en:
SZ 1031: Combinación rellenable de cristal/referencia, cuerpo de cristal, cable de 1,5metros con conector BNC.
Líquidos muy contaminados,instrumentos portátiles, laboratorio.Aplicación en:
Electrodos pH autolimpiablesEstos electrodos son la nueva generación de los tradicionales electrodos lisos, que mantienen
las características autolimpiantes por el efecto del flujo tangencial del fluido.Pueden utilizarse en tubería o sumergidos.
Electrodo doble con electrolito sellado, no necesita mantenimiento y garantiza un prolongadofuncionamiento con líquidos que contienen amoniaco, cloro, sulfatos, cianatos y otros
contaminantes.
SZ 1140:
SZ 947
Gel polimero, rango 0...12 pH,temperatura de uso 0.. 100 ºC, máximapresión 10 bar, cuerpo de PVDF, conector tipoDL, rosca 3/4” NPT, longitud de 140 mm (45mm sumergidos)Cable: accesorio con 9 metros.
SZ 1150:
SZ 9441
Gel polimero, con sensor Pt 100,rango 0...12 pH, temperatura de uso 0...100ºC, máxima presión 10 bar, cuerpo de PVDF,conector tipo DL, rosca 3/4” NPT, longitud de140 mm (45 mm sumergidos), cable: accesorio
con 10 metros y conector IP67
Epoxy O.R.P. electrodes
SZ 240 Gold/Reference combination electrode. Sealed Gel, epoxy body,S7 connector.Applications: clean water, portable instruments, laboratory.
SZ 250 Platinum/Reference combination electrode. Sealed Gel,epoxy body, S7 connector.Applications: clean water, portable instruments, laboratory.
SZ 245 Gold/Reference combination electrode. Sealed Gel, epoxy body,cable 9 m.Applications: cyanide treatment, industrial instruments.In-line up to 7 bar.
SZ 2011 Platinum wire/Reference combination electrode. Sealed Gel,epoxy body, cable 1.5 m with BNC connector.O.E.M. low cost version. (10 pcs. minimum order)Applications: Swimming pools, portable and industrialinstruments. In-line up to 7 bar.
SZ 2055 Platinum/Reference combination electrode. Sealed Gel,epoxy body, cable 9 m, bulk.O.E.M. low cost version. (10 pcs. minimum order)Applications: clean water, swimming pools, industrialinstruments. In-line up to 10 bar.
SZ 251 Platinum/Reference combination electrode. Sealed Gel,epoxy body, cable1.5 m with BNC connector.Applications: clean water, swimming pools, portable instruments,laboratory. In-line up to 7 bar.
SZ 255 Platinum/Reference combination electrode. Sealed Gel,epoxy body, cable 9 m.Applications: clean water, swimming pools, industrialinstruments. In-line up to 7 bar.
SZ 2035 ORP electrode Band-Platinum/Ref. combination, epoxy body,Gel sealed, cable 9 m. Low cost (10 pcs minimum order).Applications: clean water, industrial instruments.In-line up to 7 bar.
Glass O.R.P. electrodes
SZ 265 Gold/Reference combination electrode. Sealed Gel, glass body,cable 9 m.Applications: cyanide treatment, industrial instruments.In-line up to 10 bar.
SZ 275 Platinum/Reference combination electrode. Sealed Gel, glassbody, cable 9 m.Applications: general purpose, chromate treatment, swimmingpools, industrial instruments. In-line up to 10 bar.
Specifications
Type Metal Temperature Length Diameter Reference°C mm mm
SZ 240 Gold 0 / 60 110 12 Ag/AgClSZ 245 Gold 0 / 60 110 12 Ag/AgClSZ 250 Platinum 0 / 60 110 12 Ag/AgClSZ 251 Platinum 0 / 60 110 12 Ag/AgClSZ 255 Platinum 0 / 60 110 12 Ag/AgClSZ 2035 Platinum 0 / 60 110 12 Ag/AgClSZ 265 Gold -5 / 110 110 12 Ag/AgClSZ 275 Platinum -5 / 110 110 12 Ag/AgClSZ 2011 Platinum 0 / 60 110 12 Ag/AgClSZ 2055 Platinum -5 / 130 110 12 Ag/AgCl + KNO3
SENSORES DE O.R.P.Epoxy y cristal
ORP autoclean flat electrodes
SZ 2060ORP electrode, double junction, polymeric gel.Electrode: Platinum diskTemperature: 0/100 ºCPressure: 10 barBody: in PVDF, DL connector, 3/4” NPT threadLength: 140 mm (45 mm in immersion)Cable: SZ 947, L=8 m (not included)
PH 7685pH/ORP controller
Add the following to the common Features/Specificationsof the 7685 Series shown overleaf
• Applications:- water treatment- food industry- drinking water- swimming pool- biotechnology
• Temperature readout• Calibration parameters display• Set-point and alarm conditions display
• Automatic or manual Temperature compensation• Operating mode: automatic and manual
• 0/20 mA or 4/20 mA programmable isolated output• Dual set-points with hysteresis, delay and min/max
programmable functions• Min/max and set-points timing alarm relay
• EEPROM parameter storage• Automatic overload protection and reset• Extractable terminal blocks• 96X96 (1/4” DIN) housing
AccessoriesThis instrument may use all pH and ORP sensors and amplified probesfrom B&C Electronics catalogue.
Specifications
Sensors typeGlass pH - Antimony pH - ORP - 080102 preamplifierRTD Pt 100 3 wires
Glass electrodeZero: 0.0 mV at pH 7 ±2 pH adjustmentSlope: 59.16 mV/pH at 25 °C 80/110 % adjustment
Antimony electrodeZero: -325 mV at pH 7 ±2 pH adjustmentSlope: 50 mV/pH at 25 °C 70/140 % adjustment
ORP electrodeZero adjustment: ±100 mVSens. adjustment: 80/110 %
Input scales* pH: 0.00/14.00 ±0.01 pH* ORP: -1000/+1000 mV ±1 mV* Software filter: 0.4/50.0 s
TemperatureMeasuring and compensation range: -10/+110 °CResolution: +/- 0.1 °CZero adjustment: ±2 °CManual Temp. comp: -10.0/110.0 °C
Option 091.211Set-point A/B selectable actions: ON/OFF - PFM - PWM
PFM actionProportional band: 0.00/1.50 pH (0/150 mV)Pulse frequency: 0/120 pulse/minFunction: Min/Max
PWM actionProportional band: 0.00/1.50 pH (0/150 mV)Pulse Period: 0/99.9 sFunction: Min/Max
Option 091.3711Dual isolated output.The user may select the temperature output
The technical specifications could be changed without notice.
SENSORES DE pH Y O.R.P.Controladores
pH 7685.010pH+ORP controller
Add the following to the common Features/Specificationsof the 7685 Series shown overleaf
• Applications:- pH + ORP measuring- chromate and cyanide treatment plants- swimming pool- autoclean sensors- PFM / PWM regulations
• Dual input from:- pH electrode (Glass or Antimony)- ORP electrode
• Input from Pt100 3 wires• pH/mV/Temperature readout• Software filter• Operating mode: automatic and manual• Calibration parameters display• Set-point and alarm conditions display• Automatic or manual Temperature compensation
• Dual isolated output:- 0/20 mA or 4/20 mA selectable- pH/ORP/°C selectable
• Dual set-points (pH/ORP selectable) with selectable action:- ON/OFF- PFM proportional Pulse Frequency Modulation- PWM proportional Pulse Width Modulation
with hysteresis, delay and min/max programmablefunctions
• Min/max and set-points timing alarm relay• Autoclean relay
• EEPROM parameter storage• Automatic overload protection and reset• Extractable terminal blocks• 96X96 (1/4” DIN) housing Accessories
This instrument may use all pH and ORP sensors from B&C Electronicscatalogue.
Specifications
Sensor typeGlass pH/Antimony pH/ ORP
Glass electrodeZero: 0.0 mV at pH 7 ±2 pH adjustmentSlope: 59.16 mV/pH 25 °C 80/110 % adjustment
Antimony electrodeZero: -325 mV at pH 7 ±2 pH adjustmentSlope: 50 mV/pH 25 °C 70/140 % adjustment
ORP electrodeZero adjustment: ±1000 mVSens. adjustment: 80/110 %
Input scales* pH: 0.00/14.00 ±0.01 pH* ORP: -1000/+1000 mV ±1 mV* Software filter: 0.4/50.0 s
TemperatureInput: RTD Pt100 2/3 wires connectionMeasuring and compensation range: -10/+110 °CZero adjustment: ±2 °C
Set point A and B* ON/OFF action 0.00/14.00 pH -1000/1000 mVHysteresis: 0.00/1.50 pH 0/150 mVDelay: 0.0/99.9 s* Function: Min/Max
PFM actionProportional band: 0.00/1.50 pH 0/150 mVPulse frequency: 0/120 pulse/min* Function: Min/Max
PWM actionProportional band: 0.00/1.50 pH 0/150 mVPulse Period: 0/99.9 sec* Function: Min/Max
Relay contactsSPDT 220 V 5 A (Resistive load)
Analog output N° 1 and N° 2* Input corresponding to the analog output : pH/mV/°C* Output range: 0-20/4-20 mA (it can be made to represent anysegment of the measuring scale)
Option091.701 RS 232 isolated output.
The output sends the data (pH, mV, °C) to theserial port of the computer.
091.404 24 Vac power supply
The technical specifications could be changed without notice
SENSORES DE pH Y O.R.P.Controladores
SENSORES DE pH Y O.R.P.Controladores
PH 565.2pH controller
• Input from pH electrodes and microtransmitters• Temperature display• Manual and automatic Temperature compensation
General informations
This instrument has all the advantages of a modern and reliable pHmeasurement and regulation for use in industrial plants and isparticularly suitable for use in fermentation processes.
Input comes directly from pH electrodes or from microtransmitters.The controller provides a digital readout of pH.
Automatic or manual Temperature compensation from 0° to 100°C isprovided with the Pt 100 device.It also features digital readings of the solution’s Temperature.The manual Temperature compensation operates when the automaticcompensation is excluded (RTD non connected).The Temperature readout, both in manual and automatic Temperatureoperation, is obtained by pushing a button on the front panel.
There are two independent on-off A and B regulators that are programmedby a front-panel control to trigger at any level within the range of themeter.The two set points have the feature of being changeable by rear selectorsand can be delayed up to 5 seconds.
The controller provides an output of 0/20 or 4/20 mA selectableproportional to the meter reading, for driving a recorder or remote readouthaving a non grounded input.
MV 545.2O.R.P. controller
• Input from O.R.P. electrodes and microtransmitters• Scale -1.999 / 1.999 mV• Regulators scale 0 / 1000 mV
General informations
This instrument, together with a probe and a microtransmitter, make upthe most advanced system in the field of ORP measurement/regulation inindustrial plants.
The controller provides a digital readout of ORP.Input comes directly from an electrode or from a microtransmitter.
There are two independent on-off A and B regulators with the possibility ofselecting the min/max function by rear selectors and also the possibility toinsert a delay function from 0 to 5 Secondsfor each set-point.
The controller provides an output of 0/20 or 4/20 mA selectable andproportional to the meter reading, for driving a recorder or remote readouthaving a non-grounded input.
SpecificationsAdd the following to the common Specifications shown overleaf
Input from: pH electrodemicrotransmitter mod. 080102RTD Pt100
Scale: 0.00/14.00 pHTemperature readout: 0/100.0 °CTemp. compensation: automatic and manual 0/100 °CTemperature sensor: RTD Pt100Input Current: < 2 pA at 20 °CInput Impedance: > 10 exp 12 ohm
SpecificationsAdd the following to the common Specifications shown overleaf
Input: from electrodefrom microtransmitter mod. 080102
Display scale: ±1999 mVRegulators scale: ±1000 mV (others as requested)Input Current: < 2 pA at 20 °CInput Impedance: > 10 exp 12 ohm
SENSORES DE pH Y O.R.P.Controladores
3647 ModelsDual set-point
PH 3647PH controller
• LCD Display• Automatic Temperature Compensation• Dual set points• Set point values display• HI/LO selectable limits• Adjustable relay time delay• 4/20 mA output• DIN Rail mounting• Detachable terminal block connectors
General informations
The pH controller incorporates a large LCD display which is easily readableeven from considerable distances.
The controller will display set point values by depressing a button on thefront panel next to the corresponding adjustment potentiometer.
The HI/LO function may be selected for each relay.
Dead Band relay adjustment allows relay activation to be delayed from0/40 Seconds.
Automatic Temperature Compensation is achieved with use of a NTC 10K.
The 4/20 mA output is available for input into recorders or other devicesrequiring a 4/20 mA input signal.
Zero and sensitivity (span) calibration adjustments are located on the frontpanel and are easily accessible.
The controller may be powered by an external power supply 110/220 Vac.
All plastic construction prevides maximum resistance to corrosion.
Detachable terminal block connectors and DIN Rail mounting provide foreasy field installation.
Accessories
See Series 3000 accessories.
Specifications
Display: LCD
Input: pH electrodeNTC 10 Kohm
Output: 4/20 mA dc 300 ohm max.
Scale: 0.00/14.00 pH
Temperature Compensation: automatic 0/80 °Cerror < ± 0.2 pH
Zero: adjustable ± 10 %
Sensitivity: adjustable from -5% to +15%
Input Current: < 2 pA
Input Resistance: > 1012 ohm
Set points: dual
Relays contacts: SPST 220 Vac 5 A (resistive load)
Hysteresis: ± 0.4 %
Relay Time Delay: adjustable 0/40 s
Operating Temperature: 0/50 °C
Operating Humidity: 0/95% R.H. non-condensing
Power Supply: 110/220 V 50/60 Hz 3 VA
Terminal block: detachable
Net Weight: 265 g
Dimensions: 105 x 95 x 58 mm (6 modules)
Mounting: DIN Rail (35 x 7.5 mm Rail)
Option 091.403: 24 Vac power supply
The technical specifications could be changed without notice.
SENSORES DE pH Y O.R.P.Controladores
MV 3647O.R.P. controller
• LCD Display• Dual set points• Set point values display• HI/LO selectable limits• Adjustable relay time delay• 4/20 mA output• DIN Rail mounting• Detachable terminal block connectors
General informations
The O.R.P. controller incorporates a large LCD display which is easilyreadable even from considerable distances.
The controller will display set point values by depressing a button on thefront panel next to the corresponding adjustment potentiometer.
The HI/LO function may be selected for each relay.
Dead Band relay adjustment allows relay activation to be delayed from0/40 Seconds.
The 4/20 mA output is available for input into recorders or other devicesrequiring a 4/20 mA input signal.
Zero and Sensitivity (Span) calibration adjustments are located on the frontpanel and are easily accessible.
The controller may be powered by an external power supply 110/220 Vac.
All plastic construction prevides maximum resistance to corrosion.
Detachable terminal block connectors and DIN Rail mounting provide foreasy field installation.
Accessories
See Series 3000 accessories.
Specifications
Display: LCD
Input: O.R.P. electrode
Output: 4/20 mA dc 300 ohm max.
Scale: 0/1000 mV
Zero: adjustable ± 10 %
Sensitivity: adjustable from -5% to +15%
Input Current: < 2 pA
Input Resistance: > 1012 ohm
Set points: dual
Relays contacts: SPST 220 Vac 5 A resistive
Hysteresis: ± 0.4 %
Relay Time Delay: adjustable 0/40 Seconds
Operating Temperature: 0/50 °C
Operating Humidity: 0/95% R.H. non-condensing
Power Supply: 110/220 V 50/60 Hz 3 VA
Terminal block: detachable
Net Weight: 265 g
Dimensions: 105 x 95 x 58 mm (6 modules)
Mounting: DIN Rail (35 x 7.5 mm Rail)
Option 091.403: 24 Vac Power supply
The technical specifications could be changed without notice.
SENSORES DE pH Y O.R.P.Transmisores
3630 ModelsTwo-wire transmitters
PH 3630pH Transmitter
MV 3630O.R.P. Transmitter
• Two wire 4/20 mA operation• Isolated current loop output• LCD display• Automatic or Manual Temperature Compensation (pH)• Temperature display (pH)• 10/30 Vdc power supply• Direct connection to PC’s• Din Rail mounting• Detachable terminal block connectors
General informations
pH and O.R.P. transmitters incorporate a large LCD display which is easilyreadable even from considerable distances.
Transmitters are powered by an external power supply from 10 to 30 Vdc.The same two wires which provide power to the transmitter also carry the4/20 mA output pH signal.
Zero and Sensitivity (span) calibration adjustments are located on the frontpanel and are easily accessible.
The 4/20 mA output is isolated for input into recorders or other devicesrequiring a 4/20 mA signal.The input/output isolation also allows input into PLC, DCS or PersonalComputers accepting 4/20 mA signals.
A common power supply may be used to power other transmitters withoutinterference from other measurement devices or sensors.
All plastic construction provides maximum resistance to corrosion.Detachable terminal block connectors and Din Rail mounting provide foreasy field installation.
The PH 3630 transmitter will display temperature values of manual orautomatic temperature compensation devices.Automatic Temperature Compensation is achieved with use of a 100 ohmplatinum RTD.
SpecificationsDisplay: LCD
Inputs pH 3630: pH electrode Pt100 3 wire
Input MV 3630: O.R.P. electrode
Output: 4/20 mA dc isolated
Scales PH 3630: 0/14.00 pH -10.0/120.0 °C
Scale MV 3630: 0/1000 mV
Temperature Compensation: manual or automatic (PH 3630 only)
Zero: adjustable ± 15%
Sensitivity: adjustable from 86% to 112%
Input Current: < 2 pA
Input Resistance: > 1012 ohm
Operating Temperature: 0/50 °C
Operating Humidity: 0/95% R.H. non-condensing
Power supply: 10/30 Vdc
Isolation: 500 V input to output
Terminal block: detachable
Net Weight: 200 g
Dimensions: 105 x 95 x 58 mm (6 modules)
Mounting: DIN Rail (35 x 7.5 mm Rail)
The technical specifications could be changed without notice.
3630
+ _
+ _
+
_
10/30 VLOOP SUPPLY DC
LOADS
INDICATORRECORDERCOMPUTER
ALARMS
3630
+
+
+
_
_
_
3630
+ _3630
+ _
+ _10/30 VLOOP SUPPLY DC
LOAD
1
+_
LOAD
1
+_
LOAD
2
MICROTRANSMITTERSfor industrial probes
• Suitable for 7685 Series and 565 Series• IP 65 water-tight protection• Water-tight output connector• For immersion and in-line probes• Easy installation and maintenance
080102.1pH and O.R.P. microtransmitter
The microtransmitter is a differential preamplifier enclosed in a water-tighthousing and makes the characteristics of the measuring electrodes signalcompatible to those of a normal connection cable.
With this technically advanced solution it is possible to make connectionsat considerably long distances between the measuring probe and thecontrol panel without the use of a shielded cable maintaining a high signalresponse speed and the complete absence of interferences, thereforegreater precision.
The connection between the microtransmitter and the panel regulator ismade using a 4-pin waterproof connector type SZ 9490 and a normal4-wire cable.
The accessory type SZ 9491 consisting of SZ 9490 + 10 m marked cable isavailable.
The microtransmitter is protected against eventual connection inversions.It is mounted in the usual way on ST type probes.
For unfixed mounting, the SZ 911 accessory must be used.Recommended cable: 4 x 0.5 mm or 4 x 0.75 mm non shielded.
AccessoriesSZ 9490 IP 67 connector for cableSZ 9491 10 mt cable and SZ 9490 connectorSZ 911 Stopper
New
SENSORES DE pH Y O.R.P.Transmisores
PH 125.2pH - ORP - °Cmeter
• High accuracy and reliability• LCD display• Temperature visualization• Automatic or manual Temperature compensation• Corrosion resistant
This instrument is designed for field applications in waste water, swimmingpools, chemical, electroplating and food industries.By pressing any key the instrument will switch on or will extend theoperation for about 5 minutes.
The temperature compensation on the pH readout is automatic or manual.The zero and sensitivity adjustment allows a very accurate calibration ofthe meter.
The plastic case with the policarbonate membrane provide a corrosionresistance in field applications.
Accessories and sensorsto be ordered separatelyBC 921: carrying caseSZ 959: buffer solutions 4/7/9 pH 50 cc.SZ 142 - SZ 161 - SZ 1031: suggested pH electrodesSZ 251: suggested ORP electrodeSP 51501 - SP 51511: suggested temperature sensors
Specifications
Display: LCD 3 1/2 digit
Scales: 0/14.00 pH ±1000 mV -20.0/+120.0 °C
Zero:± 15 %
Sensitivity: ± 20 % (pH only)
Input: from pH/ORP electrodes, BNC connectors
from Pt1000, jack connector
Power:9 V battery
Battery life: 100 hours operation
Dimensions: 92 x 155 x 33 mm
Weight: 300 g
Portátiles
SENSORES DE pHTABLA DE SELECCIÓN
MODELO MEMBRANA
CUERPO
R. MΩ
a 25 ºC
RANGO
en pH
RANGO
TEMP.
DIMENSIONES
L X Ø en mm.
REFERENCIA APLICACION USO CONTROLADORES
INDICADORES
SZ 142 GX2Epoxy
50 0…13 0…60 110 X 121,5 m conector
Ag/AgCl Agua limpia,piscinas
Equiposportátiles
PH 125.2PORTATIL
SZ 145 GX2Epoxy
50 0…13 0…60 110 X 129 m cable
Ag/AgCl Agua limpia,Industrial
En línea, < 7bar
PH 65.2 / PH3647 /PH3630
SZ 1021 GX2Epoxy
50 0…13 0…60 110 X 121 m cable
Ag/AgCl Agua limpia,piscinas
Equiposportátiles
PH125.2PORTATIL
SZ 1025 GX2Epoxy
50 0…13 0…60 110 X 129 m cable
Ag/AgCl Agua limpia,Industrial
En línea, < 7bar
PH565.2 / PH3647/ PH3630
SZ 151 GX2Epoxy
100 0…13 -5…130 110 X 121,5 m conector
Ag/AgClY KN03
Líquidos muycontaminados
Altatemperatura
TODOS +TRANSMISORES
SZ 160 GX2Cristal
50 0…13 0…100 110 X 12Conector SZ
Ag/AgCl Líquidoscontaminados
Equiposportátiles
PH 125.2PORTATIL
SZ 161 GX2Cristal
50 0…13 0…100 110 X 121,5 m conector
Ag/AgCl Líquidoscontaminados
Equiposportátiles
PH 125.2PORTATIL
SZ 165 GX2Cristal
50 0…13 0…100 110 X 129 m cable
Ag/AgCl Propósitogeneral
Estándar usoindustrial
TODOS +TRANSMISORES
SZ 171 GX2Cristal
50 0…13 0…100 110 X 121,5 m conector
Ag/AgClY KN03
Líquidoscontaminados
Equiposportátiles
PH 125.2PORTATIL
SZ 173 GX2Cristal
50 0…13 0…100 110 X 129 m cable
Ag/AgClY KN03
Líquidoscontaminados
Estándar usoindustrial
TODOS +TRANSMISORES
SZ 191 GX2Cristal
100 0…13 5…130 110 X 121,5 m conector
Ag/AgClY KN03
Altatemperatura
O.E.M. TODOS +TRANSMISORES
SZ 195.1 GX3 domeCristal
200 0…14 -5…130 110 X 129 m cable
Ag/AgClY KN03
Líquidoscontaminados
Altatemperatura
TODOS +TRANSMISORES
SZ 1031 GX2Cristal
50 0…13 0…80 110 X 121,5 m conector
Ag/AgCl Líquidos muycontaminados
Electrodorellenable
PH 125.2PORTATIL
SZ 1075 AntimonioCristal
-- 2…11 -5…100 110 X 129 m cable
Ag/AgCl Líquidosácidos con HF
Industrial PH7685 /PH7685.010
SZ 1093 GX2Epoxy
50 0…13 0…80 80 X 123 m conector
Ag/AgCl InvernaderosAgricultura
Hidropónico TODOS +TRANSMISORES
SZ 1131 GX1Epoxy
300 0…12 -5…100 110 x 9,51 m conector
Ag/AgCl InvernaderosAgricultura
Para pinchar TODOS +TRANSMISORES
SZ 1140 GX2PVDF
50 0…12 0…100 140 X ¾” NPT8 m conector
Ag/AgClY KN03
Líquidoscontaminados
AUTOLIMPIABLEUso industrial
TODOS +TRANSMISORES
SZ 1150 GX2PVDF
50 0…12+Pt100
0…100 140 X ¾” NPT8 m conector
Ag/AgClY KN03
Líquidoscontaminados
AUTOLIMPIABLEUso industrial
TODOS +TRANSMISORES
TS 284 GX2 50 0…14 0…100 370 X 38 Ag/AgCl Sumergible Pozos, rios 4…20 mA
Electrode P/N Director Measurement Range Slope pH Temperature range °C Response time Interferences
mV/decade range not sec. (95%, in 1x10-2 M)
Molar PPM at 25°C continuous continuous
Ammonia (NH3) NH31501 1.0 - 5x10-7 17,000-0.01 56±3 > 11 0-50 - 30 Volatile amines
Ammonium (NH4+) NH41501/NH41502 1.0 - 5x10-6 18,000-0.1 56± 2 4-10 0-50 - 30 K+
Bromide (Br-) BRO1501/BRO1502 1.0 - 5X10-6 79,900-0.40 57±2 2-14 0-80 0-100 20 I-, CN-, S2-, elevate conc. di Cl-, NH3
Cadmium (Cd2+) CD21501/CD21502 1x10-1 - 1x10-7 11,200-0.01 27±2 2-12 0-80 0-100 20 Ag+, Hg2+, Cu2+, elevate conc. di Pb2+, Fe2+
Calcium (Ca2+) CAL1501/CAL1502 1.0 - 5x10-6 40,000-0.2 27±2 3-10 0-50 - 30 Pb2+, Hg2+,Cu2+, Ni2+
Carbon dioxide (CO2) CO21501 1x10-2 - 1x10-4 440-4.4 56±3 4.8-5.2 0-50 - 30 Volatile weak acids
(Carbonate CO32-)
Chloride (Cl-) CLO1501/CLO1502 1.0 - 5x10-6 35,500-1.8 56±2 2-12 0-80 - 20 S2-, I-, CN-,Br -,
Copper (Cu2+) CU01501/CU01502 1x10-1 - 1x10-8 6,350-6.4x10-4 27±2 0-12 0-80 0-100 20 Ag+, Hg2+, elevate conc. di Cl-, Br -, Fe2+
Cyanide (CN-) CNO1501/CNO1502 1X10-2 - 5X10-6 260-0.13 57±2 11-13 0-80 0-100 20 S2-, I-, Br -, Cl-
Fluoride (F-) FOO1501/FOO1502 Saturated - 1x10-6 Saturated -0;02 57±2 5-8 0-80 0-100 20 OH-
Fluoroborate (BF4-) BF45101 1.0 - 7x10-6 10,800-0,1 57±2 2.5-11 0-50 - 30 Cl O4
-, I, CN-
BF41502 (as B) 56±2
Iodide (I-) IOO1501/IOO1502 1.0 - 5x10-8 127,000-6x10-3 57±2 0-14 0-80 0-100 20 S2-, CN-, NH3, S2O32-, Cl-,Br -
Lead (Pb2+) PB21501/PB21502 1x10-1 - 1x10-6 20,700-0.2 25±2 3-8 0-80 0-100 20 Ag+, Hg2+, elevate conc. di Cd2+ e di Fe2+
Lithium (Li +) LIT1501/LIT1502 1.0 - 1x10-5 6,900-0.7 56±2 5-10 0-50 - 30 Na+, K+,Ca2+
Nitrate (NO3-) NO31501/NO31502 1.0 - 7x10-6 62,000-0.5 57±2 2.5-11 0-50 - 30 Cl 04
-, I, CN-, BF4-
Nitrogen Oxide (NOx) NOX1501 5x10-3 - 5x10-6 220-0.2 56±3 1.1-1.7 0-50 - 30 SO2 - HF, CH3 COOH
Perchlorate (Cl O4-) PER1501/PER1502 1.0 - 7x10-6 98.000-0,7 56±2 2.5-11 0-50 - 30 No significant interference
Potassium (K+) KOO1501/KOO1502 1.0 - 1x10-6 39,000-0.04 56±2 2-12 0-40 0-50 30 Cs+, NH4+
Silver/Sulfide (Ag+/S2-) AGS1501 Ag+=1.0 - 1x10-7 107,900-0.01 57±2 2-12 0-80 0-100 20 Hg2+, Hg+
AGS1502 S2-=1.0 - 1x10-7 32,100-0.003 27
Sodium (Na+) NA71501/NA71502 1.0 - 1x10-5 23,000-0.2 56±2 5-12 0-80 - 20 K+, Li+,H+,Ag+,Cs+
Surfactant (X+, X-) SUR1501/SUR1502 5x10-2, 1x10-5 12,000-1.0 for titration 2-12 0-50 - 30 Similar types of Surfactants
Water Hardness WHA1501/WHA1502 1.0 - 1x10-5 40,00-0.4 26±3 5-10 0-50 - 20 Cu2+, Zn2+, Ni2+, Fe2+
(Ca2+/Mg2+) (as Ca)
Models 1501 are mono, 1502 are combined glass body, 1503 are combined epoxy body
SENSORES DE ION SELECTIVOEpoxy y cristal
Ion Selective ElectrodesB&C Electronics offers a wide range of IonSelective Electrodes including:
1. Polymer Membrane Electrodes2. Solid State Electrodes3. Gas Sensing Electrodes4. Glass Membrane Electrodes
Ion Selective Electrodes are available ashalf-cells (mono) or as glass or epoxycombination electrodes.Measurements with half-cell electrodesrequire the use of an additional referenceelectrode.
Ask our sales department in order to selectthe suitable ISE for continuous operationwith our IC 7685 - IC 7685.010Ion Concentration Controlles.
IC 7685Ion Concentration controller
Add the following to the common Features/Specificationsof the 7685 Series shown overleaf
• Applications:- with ISE electrodes- water softeners- drinking water- electroplating industry- Aluminum surface coating- CO2 in biotechnology
• Input from any ISE and CO 2 electrodes• Input form Pt100 3 wires
• Measuring unit: PPM - mg/l - gr/l - mbar - mmHg• Measuring range from 0.01 to 1000• Autoranging• Up to 5 points calibration
• Temperature readout• Calibration parameters display• Dual set-point and alarm conditions display• Automatic or manual temperature compensation• Filter software (2 levels)
• Isolated output:- 0/20 mA or 4/20 mA selectable- programmable input on the span- dual output as option
• Automatic or manual operation• Dual set-point with hysteresis, delay, and min/max
programmable functions
• Alarm:- min/max and delay programmable- on set-points timing
Accessories
This instrument may use all the ISE sensors for continuous operation
Specifications
Operating modeAutomatic/manual
ISE input* Ion type X- -, X-, X+, X++
Measuring scales: 5 decades from 0.01 to 1000
* Scales10.00 - 100.0 - 1000 autoranging2 level of software filter for small/large variations
CalibrationUp to 5 points over all the measuring rangeZero adjustment: ± 100.0 mVRange: ± 1100 mV
TemperatureInput: RTD Pt1000 3 wiresMeasuring range:-10.0/110.0 °CResolution: ± 0.1 °CZero: ± 2 °CManual Temperature: -10/110 °C
Temperature compensationSelectable: able/disableCompensation range: -10/110 °CReference Temperature: 20 °C
The technical specifications may be changed without notice
Example of applications
SENSORES DE ION SELECTIVOControladores
GUEMISA Sta. Virgilia 29 local pos. 28033 Madrid Tfno.: 91 764 21 00 Fax.: 91 764 21 32Email: [email protected] Web: www.guemisa.com
IC 7685.010Ion concentration controller with auto calibrationand auto cleaning functions.
• Applications:- combined with ISE electrodes- softener- galvanic industry
• Input for all ISE electrodes• Readout: PPM – mg/l – g/l – mbar - mmHg• Measuring range: from 0.01 to 1000• Selectable scale: 10.00 - 100.0 - 1000• Auto ranging• 5 calibration points• Temperature input with Pt100 3 wires• Temperature readout• Manual and automatic temperature compensation• Set-point and alarm conditions display• Alphanumeric back-lighted LCD• Dual software filter• Analog output: 0/20 - 4/20 mA isolated• Input field configurable in output range• Automatic and manual operations• 1 or 2 set point with programmable hysteresis, delay, min/max• Alarm relay• Auto calibration function• Auto clean function• Terminal blocks extractable• Dimensions 96x96 DIN 43700• Software:
- easy to use- 3 access levels- keyboard lock- access code numbers- watch dog control system
This model includes the auto calibration and auto cleaning functions of thesensor, done by external devices activated by the instruments.For this, customers can make reliable and affordable ISE analyzers,through the use of ISE electrodes, which in continues applications, requirefrequent calibration and cleaning operations.
Specifications(add common to the 7685 specifications)
Operating ModeAutomatic/ Manual
ISE electrodes input* Type of Ion: X- -, X-, X+, X++
Measuring field: 5 decades from 0.01 to 1000
* Scale10.00 – 1000 with auto rangingSoftware filter 90%RT: two levels from 0.4/20.0seconds for large/small variations
CalibrationUp to 5 points on the entire scaleZero adjustment: ±100.0 mVRange mV: ±1100.0 mV
TemperatureInput: RTD Pt100 3 wiresMeasuring field: -10/100°CResolution: ±0.1°CZero correction: ±2°CManual temperature: -10/100°C
Thermo compensationCompensation field: -10/110°CRef. temperature: 20°C
* Auto calibration functionDisabled – Manual – Automatic + manual* Repetition time: 1/999 hours* Calibration time: 0.1/19.0 minutes* Restoring time: 0.1/19.0 minutes* Standard solutions: 0.01/1000 PPM
* Auto cleaning functionDisabled – Manual – Automatic + manual* Repetition time: 1/999 hours* Cleaning time: 0.5/60.0 seconds* Restoring time: 0.1/19.0 minutes
Technical specifications could be changed without notice
New
SENSORES DE ION SELECTIVOControladores
Gas sensing analyzersResidual Sulfite, D. Sulfide, Total Residual Chlorine
This Monitor series takes a unique approach to the measurement of ionconcentration. In operation a small amount of sample is pumped into thesystem and mixed with a suitable reagent.The mixed sample flows into a special chamber where the ion is convertedin a gas stripped from the sample.A sensor located in the gas stream measures the gas concentration anddisplays the results in terms of equivalent ion concentration.
Monitors consist of two separate components:
- a chemistry module where the sample is conditioned properly to make themeasurement
- an electronic readout module containing the measuring display, analogoutput, and alarm contacts.This module is the S 7685 for Sulfite/Sulfide, and the CL 7685.010 for theTotal Chlorine.
A 25 foot sensor cable is supplied to connect the two modules together, andthe separation can be increased to 100 feet by the use of a junction box andadditional signal cable.
A sample inlet overflow block is provided on the left side of the chemistrymodule.Systems are extremely easy to operate and maintain, with the reagentusage limited to one liter every 10 days at standard flow rate.Sample and reagent are pumped using long life peristaltic pump tubingthat requires replacement approximately every 6 months.The sensor requires no maintenance other than an occasional visualinspection to insure that no deposits have collected due to airborneparticulates.
Chemistry module
Applications
Residual Sulfite: Dechlorination plants, Textile, Chemical, and Sulfurraw material industries.Dissolved Sulfide: Spa, Drinking water, Tanneries, and Waste waterplants.Total Chlorine: Pulp and Paper, Chemical, and waste water industries
Measuring principle
Sensor
Reactor
Air
Samplepump
Reagentpump
SENSORES DE ION SELECTIVOControladores
Dissolved OxygenAutoclean system
• Applications:- water treatment- activated sludge- de-nitrification- fish pond
The on-line monitoring system is designed for the continuousmeasurement of oxygen gas in solution.
The full scale operating range of the system may be selected by the userfor 0-20.00 PPM or 0-40.00 PPM, and the sensing system will operateon water streams with temperature from 0 to 50 °C.
The measured dissolved oxygen concentration is displayed on a backlitliquid crystal display on the front of the instrument. The D.O. monitor iswell suited for wastewater treatment aeration tanks, effluent monitoring,or stream monitoring.
The basic sensing element used in the D.O. monitor is a galvanicmembraned sensor assembly that automatically delivers high pressureair to the tip of the sensor to effectively blast accumulated growth fromthe membrane.
The system includes two main components and fittings:
• OD 8112 D.Oxygen assembling with cleaner
• OD 8182 D.Oxygen sensor with cleaner nozzle
• Installation accessories
• Spares
For special applications, the D.O monitor can be supplied without thecleaner, and the customer will provide the pressure air to the sensor.
Submersible sensors are designed for direct immersion in an aeration tankor flowing stream.
A 15 m cable is potted into the top section of the sensor assembly, andconnects directly to the D.O. monitor,.A separate tubing connection located at the top of the sensor assembly isprovided for connection of a 15 m length of plastic tubing between thesensor and the monitor.
The D.O. sensor assembling is mounted to a 1" pipe using a specialmounting adapter.The 1" pipe is attached to the tank handrail with a bracket assembly thatholds the sensor at a slight angle in the tank.
Once installed and placed into operation, the Autoclean D.O. sensor willprovide months of reliable D.O. measurement in almost any application.Sensor should be checked for build-up after the first 3 months to verify thatthe cleaner is keeping the membrane clean.However, sensor maintenance intervals of 6 months or more are likely inmost aeration tanks.
The sensor cleaning frequency is user programmable, and units are shippedwith a default cleaning frequency of once every 24 hours.This frequency has proven sufficient for most aeration applications, but canbe increased if needed for a specific application.A cleaning frequency of more than every 2 hours is not recommended.
System installationThe installation of the auto-clean D.oxygen system is quick and simple.A special mounting adapter connects the sensor to standard 1" conduit orpipe, and another adapter provides secure connection of the pipe to astandard handrail system.
OXIGENO DISUELTOSistema autolimpiable
Install & forget
GUEMISA Sta. Virgilia 29 local pos. 28033 Madrid Tfno.: 91 764 21 00 Fax.: 91 764 21 32Email: [email protected] Web: www.guemisa.com
OD 8112Autoclean D.Oxygen monitor
In this control box are installed the OD 7685.010 monitor and the cleanerconsisting of compressor, reservoir and solenoid.
Air pressure: 3 barDimensions: 376 x 306 x 207 mmProtection: IP 65Power: 220 Vac 50/60 Hz 150 VA
OD 7685.010 specifications are described on the page related to theinstrument.
OD 8182Autoclean D.Oxygen probe
The probe is equipped with a galvanic membraned sensor and a RTDtemperature element.A titanium nozzle injects the pressure air for the membrane cleaning.
The package includes the connecting cable and:
0012.020007 DO sensor0012.040003 Assembled Lead electrode0012.050001 Kit of 10 membranes 5 mils0012.090007 Electrolyte bottle 120 cc. (4 OZ)0012.050014 Screw and OR Kit0012.440040 33 m PVC tubing
Specifications
Submersible type with top holder and screw-in sensorResponse time 90% in 180 s with 5 mil membraneTemp. sensor Pt100 integral to sensorTemp. limits -5 to +55 °CConnections 5 wires cable, 15 m (150 m max)
15 m flexible tubing 1/4"-3/8"Materials Noryl and stainless steel
AccessoriesChoose one of the following accessory for the installation
0012.450043Adapter for extension pipe
0012.000624Swivel mounting including 0012.450043 adapter
Typical installation of the immersion probe
OXIGENO DISUELTOSistema autolimpiable
OD 7685.010Autoclean Dissolved Oxygen controller
Add the following to the common Features/Specificationsof the 7685 Series shown overleaf
• Applications:- water treatment- activated sludge- de-nitrification- fish pond
• Input from galvanic cell• Scales: PPM - mg/l - % air sat. - mmHg• Autoranging
• Temperature readout in °C or °F• Dual filter software
• Calibration parameters display• Dual set-point and alarm conditions display
• Autocalibration in air• Automatic or manual temperature compensation• Pressure, R.H., salinity compensation
• Dual isolated output:- 0/20 mA or 4/20 mA selectable- programmable input on the span
• Automatic or manual operation• Dual set-point with hysteresis, delay, and min/max
programmable functions
• Autoclean relay and holding function for input and outputs
• Automatic overload protection and reset• Extractable terminal block• 96x96 (1/4 DIN) housing
Probes and accessories
This instrument uses the OD 8182 dissolved oxygen probe.
It is normally installed in the OD 8112 autoclean assembly
Specifications
* Galvanic cellmembrane: 1 mil - 2 mil - 5 mil (5 mil standard)cable length: 15 m
* Scales0/400 - 0/200.0 - 0/20.00 mmHg0/400 - 0/200.0 - 0/20.00 % air saturation0/40.0 - 0/20.0 PPM - 0/2000 PPB0/40.0 - 0/20.00 mg/lt - 0/2000 µgr/lt
* Software filter 90% RT: 0.4/50.0 sZero: ± 1 mVSensitivity: 62.5/212.5 %
Temperaturemeasuring and compensation range: +2/+52 °C or 28,4/125,5 °FZero: ± 2 °C or ±3,6 °FInput: Pt100 3 wires
Temperature compensationInternal table for each membrane typeReference temperature: 20 °C or 68 °FManual compensation: 0/50.0 °C or 32/122 °F
Secondary parametersPressure: 500/800 mmHgSalinity: 0/60,000 PPMRelative humidity: 0/100 %
Analog outputsDual isolated for D.O and temperature
Set pointsDual with ON/OFF programmable functions
* Autoclean functionDisable - manual - auto + manual* Repetition cycle: 0.1/24 hours* Number of cycles: from 1 to 10* Compressor time: 0.5/60.0 sec.* Discharge time: 0.5/10.0 sec.* Holding time: 0/20.0 min. (for measuring, outputs, relays)
The technical specifications may be changed without notice
New
OXIGENO DISUELTOControlador
AH
Dissolved Oxygen cells
SZ 641.2 Polarographic D.O. cell with built-in Pt1000.250 nA. Current in air at 20 °C, Temperature 0/45 °C.Epoxy body L=110 mm, D=12 mm,cable 1.5m with BNC/Jack connectors.Ship with spare membrane and electrolyte.Applications: portable instruments.
SZ 654.1 Polarographic D.O. cell with built-in Pt100.250 nA. Current in air at 20 °C, Temperature 0/45 °C.Epoxy body L=110 mm, D=12mm, cable 5 m.Ship with spare membrane and electrolyte.Applications: immersion and in-line, water treatment,industrial instruments.SZ 659.R1 spare membrane/electrolyte.
SZ 664.2 Polarographic D.O. cell with built-in Pt1000.250 nA. Current in air at 20 °C, Temperature 0/60 °C.Epoxy body L=125 mm, D=21.5 mm, cable 5 m with BNC/Jack connectors.Ship with spare membrane and electrolyte.Applications: submersible, portable instruments in watertreatment.SZ 669.R1 spare membrane/electrolyte.
pH/ORP electrodes - D.O 2/CO2 cells - Sterilizable for Biotechnology
ask for the specific catalog
Pressurizable andsterilizable probes
SI 683D.Oxygen probe with polarographic sensor type SZ 654.1. L. 1170 mm.
ST 683D.Oxygen probe with polarographic sensor type SZ 654.1 andmicrotranmitter 080610.2. Length 1200 mm.
SpecificationsBody: PVCDiameter: 34 mm.Depth: adjustableOperating Temperature: 40 °C max.Options: special materials and length
OXIGENO DISUELTOSensores
OD 7685Dissolved Oxygen controller
Add the following to the common Features/Specificationsof the 7685 Series shown overleaf
• Applications:- water treatment- drinking water- fish pond- food industry- biotechnology
• Selectable input from:- polarographic high/low current cells- galvanic cells- 080610.2 preamplifier
• Scales: PPM - mg/l - % air sat. - mmHg• Autoranging
• Temperature readout• Dual filter software
• Calibration parameters display• Dual set-point and alarm conditions display
• Autocalibration in air• Automatic or manual temperature compensation• Pressure, R.H., salinity compensation
• Isolated output:- 0/20 mA or 4/20 mA selectable- programmable input on the span
• Automatic or manual operation• Dual set-point with hysteresis, delay, and min/max
programmable functions
• Alarm:- min/max and delay programmable- on set-points timing
• Autoclean relay and holding function for input and outputs
Specifications
Polarographic CellLow Current cell: 25/75 nAHigh Current cell: 140/510 nA* Polarization: 0/1250 mV
Galvanic CellInput: 17/51 mV
Selectable scales0/200.0 mmHg D.O. partial pressure0/200.0 % air saturation0/20.00 PPM0/20.00 mg/l* Software filter 90% RT: 0.4/50.0 sec.Zero adjustment: +/- 10%Sensitivity adjustment: 80/170 %Display resolution at 20°C: 1/1000
Secondary parametersPressure: 500/800 mmHgSalinity: 0/60,000 PPMRelative Humidity: 0/100 %
TemperatureInput: RTD Pt100 2/3 wires connectionMeasuring and compensation range: -2/+52 °CResolution: ±0.1 °CZero adjustment: ±2 °CManual temp. comp: 0/50 °C
OptionsThe following options are available:091.3713 dual analog programmable and isolated output.
The operator may select an output for temperature.091.701 RS232 isolated output.
The output sends the data (E.C., °C) to the serial port ofthe computer.
091.404 24 Vac power supply
The technical specifications may be changed without notice
OXIGENO DISUELTOControlador
- OD 7635 Dissolved Oxygen
OD 3630Dissolved Oxygen transmitter
OXIGENO DISUELTOControlador
OD 565.2Dissolved Oxygen controller
• Input polarographic cellgalvanic cell (option)microtransmitter
• Scales PPM - % air saturation - % O 2 - mmHg• Temperature and Temperature Coefficient display• Manual and automatic Temperature compensation
General informationsThis instrument presents all the advantages of a modern and reliablemeasurement of dissolved oxygen in industrial plants.
Input comes either from a polarographic cell or from a microtransmitter(Galvanic cell as option).
It also features manual and automatic temperature compensation by meansof a Pt100 sensor and the display and the adjustment of the temperaturecoefficient.
The temperature value is adjusted by the trimmer on the front panel.The temperature readout, both in manual and automatic temperatureoperation, is obtained by pushing a button on the front panel.
The two set-points are independent and programmable by a front-panelcontrol with the possibility of selecting the min/max function by rearselectors and also the possibility to insert a delay up to 5 seconds.
The controller provides an output of 0/20 or 4/20 mA selectable,proportional to the meter reading, for driving a recorder or remote readouthaving a non-grounded input.
SpecificationsAdd the following to the common Specifications shown overleaf
Input: from polarographic O2 cellfrom microtransmitter mod. 080610from RTD Pt100from galvanic cell (option)
Scales: 0 to 199.9 % O2 (in air value 20.9)0 to 199.9 % (in air value 100.0)0 to 199.9 mmHg (in air value 155.5)0 to 19.99 mg/l (in air value 9.20)
Temperature readout: 0/100.0 °CTemp. compensation: manual and automatic 0/100 °CTemp. Coefficient: 0 to 5.5 %/°CTemperature sensor: RTD Pt 100Cell Current in air: 30 nA (others as requested)
MICROTRANSMITTERSfor industrial probes
• Suitable for 7685 Series and 565 Series• IP 65 water-tight protection• Water-tight output connector• For immersion and in-line probes• Easy installation and maintenance
080610.2Dissolved Oxygen microtransmitter
This miniature preamplifier is realised in a water-tight enclosure with awaterproof connector for a shielded 7-wire cable for the transmission ofdissolved oxygen and temperature signals.
Input comes from polarographic cells and from Pt100 devices.It is used together with the OD 7685 or OD 565.2 models in cases wherethere are long distances between the oxygen cell and the controller.
The transmitter can be adjusted as far as the zero point, the sensitivityand the cell polarization is concerned.The connection between the microtransmitter and the panel regulator ismade using a 7-pin waterproof connector (cod. 2231520).
SpecificationsStandard cables with connector are also available:SZ 9481: 2231520 + cable length 10 m (33 feet)SZ 9483: 2231520 + cable length 30 m (100 feet)Recommended cable:7 x 0.25 mm shielded
AccessoriesSee accessories for 080315.
OXIGENO DISUELTOEquipos portátiles
OD 125.2Dissolved OxygenTemperature meter
• High accuracy and reliability• LCD display• Temperature visualization• Automatic or manual Temperature compensation• Corrosion resistant
This instrument is designed for a reliable D. Oxygen measuring in wastewater and in field applications.
By pressing any key the instrument will switch on or will extend theoperation for about 5 minutes.
The temperature compensation on the readout is automatic or manual.The zero and sensitivity adjustment allows a very accurate calibration ofthe meter.
The plastic case with the policarbonate membrane provide a corrosionresistance in field applications.
Accessories and sensorsto be ordered separatelyBC 921: carrying caseSZ 641.2: polarographic cell with built-in Pt1000SP 51501 - SP 51511: suggested temperature sensors
Specifications
Display: LCD 3 1/2 digitScales: 0/19.99 PPM 0/100 % air sat. -20.0/+120.0 °CZero:± 15 % Sensitivity: ± 20 %Input: from polarographic cell, BNC connectors
from Pt1000, jack connectorLiquid speed: 0.3 / 0.7 m/sResponse time: 15 s at 95%Compensation: error ±1% f.s. for ±5 °C
from the calibration temperaturePower:9 Vdc batteryBattery life: 100 hours operationDimensions: 92 x 155 x 33 mm Weight: 300 g
SIMULATORS
OD 105.1Dissolved Oxygen Simulator
This instrument is designed to calibrate the D.Oxygen meters and to checkthe D.Oxygen polarographic cells.
By selecting the CELL function the instrument provides the polarizationvoltage to the cell under test and it measures the delivered current.
By selecting the AMP function the instrument measures the polarizationvoltage and provides an adjustable current to test the input circuits of theD.Oxygen meter.
All data are visualized on the display.
Specifications
Display: LCD 3 1/2 digitPolarization Voltage (output): 0/1000 mVPolarization Voltage (input): 0/1000 mVOutput Current: 0/199.9 nA - 0/1999 nAInput Current: 0/199.9 - 0/1999 nAConnectors: BNCPower:9 Vdc batteryBattery life: 100 hours operationDimensions: 92 x 155 x 45 mmWeight: 300 g
GUEMISA Sta. Virgilia 29 local pos. 28033 Madrid Tfno.: 91 764 21 00 Fax.: 91 764 21 32Email: [email protected] Web: www.guemisa.com
SZ 283Potentiostatic electrode
This sensor is made for the measurement of Free Chlorine, Chlorinedioxide and D.Ozone in water.
The potentiostatic method is an “amperometric” measure with constantpotential, made through 2 metal electrodes and a reference electrodedipped in a cell.
The current running through the cell consumes Chlorine or Ozonecontents, therefore they must be renewed through a constant liquid flow.
In the traditional amperometric measurement it results difficult tomaintain a constant relation between cell current and Chlorine (Ozone)concentration, especially near the zero, because of the ORP and liquidresistance effects. As result frequent zero and sensitivity calibration areneeded.
In the potentiostatic measuring, the electrodes potential is electronicallycontrolled in relation to the liquid, providing a linear relationshipcurrent/concentration and a very stable zero value in oxidative absence.
The sensor is shaped so that it is easy to clean and replace.
It is suggested to place the sensor in a measurement cell SZ 7231or SZ 7233 provided with overflow in order to maintain the sample flowconstant.If placed in different types of cells or in a pipe-line, in order to avoid aninstable measurement, it is necessary for the flow to be constant.
Specifications
Electrodes: 2 Platinum ringsReference: gel with annular junctionBody: glassCable: 3 mMax pressure: 10 bar at 20°CDimensions: 110x12 mm
SZ 7231 – SZ 7233Flow cells
This series of cells is made for the measurement of Residual Chlorine witha potentiostatic method.
The cell’s manufacturing characteristics allow the sample to run throughthe potentiostatic electrode site with a constant velocity.The in-flow can be regulated through a check valve.
The SZ 7231 cell is for the potentiostatic electrode only, while the SZ 7233cell is also for additional pH and O.R.P. electrodes and for a temperaturesensor.
The package includes a 1/4" fitting, 2 meters of 4x6 plastic tubing for thesample drawing and 2 screws for wall fastening.
Specifications
Material: clear acrylic resinInlet: 1/4" fittingOutlet: fitting for 10x14 mm tubingConnection tubing: 2 m 4x6 tubingFlow: about 10/30 litre/hour approxTemperature: 0/50°CSZ 7233 dimensions: 150 x 120 x 40 mmSZ 7231 dimensions: 150 x 90 x 40 mmSensors site: diameter 12 mm for pH/ORP/Cl
diameter 5 mm for temperatureSuggested sensors: pH = SZ 165
ORP = SZ 275Cl = SZ 283°C = SP 514
SENSORES DE CLORO Y OZONOlibre en agua
GUEMISA Sta. Virgilia 29 local pos. 28033 Madrid Tfno.: 91 764 21 00 Fax.: 91 764 21 32Email: [email protected] Web: www.guemisa.com
This cell is designed for the in-line or in-flow continuous measurement ofResidual Chlorine or Dissolved Ozone in solution.
The measuring sensor is inserted in the holder of the cell, which protectsthe body and places the sensing part in the right position into the cell.
The sample inlet flow will create a continuous movement of the internalballs whose contact with the sensing part of the sensor will perform a selfcleaning action.
The package includes:
- plastic tube for the connection to the sample- fixing clamp- spare balls.
The sample inlet pressure must be constant in order to get a continuousflow necessary to obtain stable and reliable measuring.
Specifications
Transparent body: acrylicHolder: PVCO Ring: NBR and fluoridated elastomerFittings: polypropyleneTubing: polytheneBalls: N° 20 into the bodyInlet/outlet: 1/8 " fittingsDiameter: 40 mm max.Length: 150 mm max.Flow: 15/40 liter/hour constantTemperature: 0/50 °CConnecting tubing: Diameter 4X6 mm. L=5 mSensor: to be order separately depending on the application
The selective membrane polarografic sensor is inside a flow cell withoverflow, for measurements with CL 7685.010 or CL 7685.001.
CL 7901For Free Chlorine measurement.
The package contains:- 0012.000066 Free Chlorine sensor- 0012.030029 a 7 m cable- 0012.000043 flow cell- 0012.090011 electrolyte 125 cc- 0012.050005 kit of 10 membranes- 0012.050004 kit of screws and OR
OZ 7901For D.Ozone measurement.
The package contains- 0012.000042 D. Ozone sensor- 0012.030029 a 7 m cable- 0012.000043 flow cell- 0012.090008 electrolyte 125 cc- 0012.050002 kit of 10 membranes- 0012.050004 kit of screws and OR
Specifications
Response time: 90% in 60 sTemperature sensor: RTD Pt100 built in the sensorTemperature limits: 5/+55 °CMaterial: Noryl and stainless steel
Type of cell: overflow systemMaterial: clear acrylicInlet: 25/110 litre/hourInlet fitting: 1/4"Outlet fitting: 1/2"
Sensors for combined Chlorine and in-line measurements are available.
New
SENSORES DE CLORO Y OZONOlibre en agua
SZ 7251Auto clean flow cellsfor Residual Chlorine/D.Ozone
CL 7901 – OZ 7901Flow cells and sensorsfor Free Chlorine/D.Ozone
CLORO Y OZONOControladores
CL 7685Potentiostatic controller forFree Chlorine, Chlorine dioxide, D. Ozone
Add the following to the common Features/Specificationsof the 7685 Series shown overleaf
• Applications:- drinking water- bottling industry
• Input from:- potentiostatic sensor- Pt100 3 wires
• Ranges: 0/2 PPM and 0/20 PPM autoranging• Filter software• Calibration mode: immediate or postponed
• Calibration parameters display• Dual set-point and alarm conditions display• Automatic or manual temperature compensation
• Isolated output:- 0/20 mA or 4/20 mA selectable- programmable input on the span
• Automatic, manual or simulated operation• Dual set-point:• Selectable actions
- ON/OFF- PFM Pulse frequency modulation- PWM Pulse width modulation- hysteresis, delay, and min/max programmable functions
• Alarm:- min/max and delay programmable- on Set-points timing
• Autoclean relay- auto + manual/manual action- holding function for input and outputs
• Automatic overload protection and reset• Extractable terminal block• 96x96 (1/4 DIN) housing
Accessories
SZ 283Potentiostatic electrode
SZ 7231Flow cell for SZ283
SZ 7233Flow cell for 3 sensors: SZ283, pH, ORP
SZ 7251Autoclean flow cell
Specifications
Input Current2 µA/PPM at 20 °C
* Scales0/2.000 PPM - 0/20.00 PPM(Cl2, ClO2, D.O3)Zero adjustment: ± 2 µACell sensitivity: 12.5/250 %* Polarization: -200 mV (0/-1250 mV)* Temperature coefficient: 0/4.0 %/°C* Filter software: 0.6/99.9 s
TemperatureInput: Pt100 3 wiresMeasuring and compensation range: -2/52 °CResolution: 0.1 °CZero adjustment: ± 1 °C
Set-point A and B* Selectable action: ON/OFF - PFM - PWM
PFM/PWM actionProportional band: 0/10 % of the scalePulse frequency: 0/120 pulse/minPulse width: 0/99.9 s
Option 091.3711Dual analog outputThe user may select the temperature output
The technical specifications may be changed without notice
CL 7685.010Residual Chlorine - D.Ozone controllerfor selective membraned sensors
Add the following to the common Features/Specificationsof the 7685 Series shown overleaf
• Applications:- drinking water- water treatment- bottling industry- OEM
• Input from selective membraned sensors:- Free Chlorine, Chlorine dioxide, Combined Chlorine, D.Ozone- Total Chlorine gas sensing method
• Input from Pt100 3 wires
• Ranges: 0/2 PPM - 0/20 PPM - 0/200 PPM autoranging• Filter software• Calibration mode: immediate or postponed
• Calibration parameters display• Dual set-point and alarm conditions display• Temperature display• Automatic or manual Temperature compensation
• Isolated output:- 0/20 mA or 4/20 mA selectable- PPM or °C programmable input on the span
• Automatic, manual or simulated operation• Dual Set-point:
- Selectable actionsON/OFFPFM pulse frequency modulationPWM pulse width modulation
- hysteresis, delay, and min/max programmable functions
• Automatic overload protection and reset• Extractable terminal block• 96x96 (1/4 DIN) housing
Accessories
CL 7901Flow cell and sensor for Free Chlorine
OZ 7901Flow cell and sensor for D. Ozone
Sensors availableFor Combined Chlorine, Sulfite.For Total Chlorine gas sensing method.
Specifications
Input current160 nA/PPM at 20 °C
* Scales0/2.000 PPM - 0/20.00 PPM -0/200.0 PPM(Cl2, ClO2, D.O3, SO3
2-)Zero adjustment: ± 200 nACell sensitivity: 12.5/250 %* Polarization: -200 mV (0/-1250 mV)* Temperature coefficient: 0/4.0 %/°C* Filter software: 0.6/99.9 s
TemperatureInput: Pt100 3 wiresMeasuring and compensation range: -2/52 °CResolution: 0.1 °CZero adjustment: ± 1 °C
Set-point A and B* Selectable action: ON/OFF - PFM - PWM
PFM/PWM actionProportional band: 0/10 % of the scalePulse frequency: 0/120 pulse/minPulse width: 0/99.9 s
Option 091.3711Dual analog outputThe user may select the temperature output
The technical specifications may be changed without notice
CLORO Y OZONOControladores
CL 7685.001PID controller forD.Ozone, Residual Chlorine
Add the following to the common Features/Specificationsof the 7685 Series shown overleaf
• Applications:- Ozone generators- drinking water- water treatment- bottling industry- OEM
• Input from- Potentiostatic sensor- Polarographic selective membraned sensors:- Total Chlorine gas sensing method
• Input from Pt100 3 wires
• Ranges: 0/2 PPM - 0/20 PPM - 0/200 PPM autoranging• Filter software (2 levels)• Calibration mode: immediate or postponed
• Calibration parameters display• Dual set-point and alarm conditions display• Temperature display• Automatic or manual temperature compensation
• Isolated output:- 0/20 mA or 4/20 mA selectable- programmable input on the span
• PID output:- 0/20 mA or 4/20 mA isolated output- dual relay for stepping motor
• Automatic or manual operation• Alarm on set-point deviation
• Automatic overload protection and reset• Extractable terminal block• 96x96 (1/4 DIN) housing
Compatible accessories
SZ 283Potentiostatic measuring sensor
SZ 7231Flow cell for Chlorine and D. Ozone
SZ 7233Flow cell for Chlorine / D. Ozone, pH, ORP sensors
SZ 7251Autoclean flow cell
CL 7901Flow cell and sensor for Free Chlorine
OZ 7901Flow cell and sensor for D. Ozone
Specifications
* Measuring: D.Ozone/Residual Chlorine* Measuring cell: Potentiostatic/Polarographic
Polarographic cellCurrent: 160 nA/PPM at 20 °C
* Scales: 0/2.000 PPM - 0/20.00 PPM -0/200.0 PPMZero adjustment: ± 200 nACell sensitivity: 12.5/250 %
Potentiostatic cell* Scales: 0/2.000 PPM - 0/20.00 PPM
Zero adjustment: ± 2 µACell sensitivity: 12.5/250 %
* Polarization: -200 mV (0/-1250 mV)* Filter software: 0.6/99.9 s (large/small)
TemperatureInput: Pt100 3 wiresMeasuring and compensation range: -2/52 °CManual temperature: -2/52 °CResolution: 0.1 °CZero adjustment: ± 1 °C
* Temperature coefficient: 0/4.0 %/°C
Regulation:* 4/20 mA or 0/20 mA/Stepping motor* Motor time: 10/120.0 s* Dead time: 0/20.0 s
Manual starting position: 0/100.0 %
Set-point: any value in the measuring range* Dead band: 0.2/20.0 % (stepping motor)
Proportional band: 0.1/400.0 %* Derivative: 0/1200 s* Integral: 0/3600 s
The technical specifications may be changed without notice
CLORO Y OZONOControladores
CL 7615Potentiostatic Chlorine controller
This unit, together with the flow cell and the potentiostatic electrode, is thebest and most advanced system for chlorine measurement.Because of the potentiostatic measuring method, it is not necessary torecalibrate the zero, the measuring is very accurate and direct chlorinereadout appears on the display.Also this accurate method prevents the fluctuation of the chlorine levels ason the amperometric and ORP methods.
This potentiostatic system represents the state of the art in the drinkingwater, swimming pool industry and others.
SpecificationsInput: from potentiostatic electrode SZ 283Scale: 0/5.00 PPM (others as requested)Hysteresis: ±0.03 PPM
Accessories
SZ 283Potentiostatic electrode
SZ 7231Flow cell for chlorine sensor
SZ 7233Flow cell for 3 sensors:Chlorine, pH, ORP
SZ 7251Autocleaning flow cell for chlorine sensor
CLORO Y OZONOControladores
3630 SERIESTwo-wire transmitters
Residual Chlorine transmitterDissolved Ozone transmitter
CL 3630
7635 SERIESMicroprocessor-based
CL 3655.012Residual Chlorine controller
Scale:0/1.999 PPM (others on request)Temperature compensation: automatic with Pt100Chlorine sensor: CL 7901D. Ozone sensor: OZ 7901
- CL 7635 Residual Chlorine - Dissolved Ozone
CLORO Y OZONOEquipos portátiles
CL 125.2Free Chlorine - Dissolved Ozone meter
This instrument is designed for a reliable Free Chlorine and D. Ozonemeasuring in swimming pools, drinking water and in field applications.
The PPM measuring is displayed by means of a potentiostatic sensordirectly immersed into the water.
by the sensor.
The calibration is performed by a comparation with an external meter(example a photometer).By pressing any key the instrument will switch on or will extend theoperation for about 5 minutes.The temperature compensation on the readout is automatic or manual.The zero and sensitivity adjustment allows a very accurate calibration ofthe meter.The plastic case with the policarbonate membrane provides a corrosionresistance in field applications.
Accessories and sensorsto be ordered separatelyBC 921: carrying caseSP 651: potentiostatic sensor with built-in Pt1000
Specifications
Display: LCD 3 1/2 digitInput: from potentiostatic sensor, BNC connectors
from Pt1000, jack connectorScales: 0/1.999 PPM - 0/19.99 PPM - -20.0/120.0 °CPower:9 Vdc batteryBattery life: 100 hours operationDimensions: 92 x 155 x 33 mmWeight: 300 g
The measuring method requires a constant pH value and a stirring of thesensor into the water in order to replace the consumed Chlorine/Ozone
GUEMISA Sta. Virgilia 29 local pos. 28033 Madrid Tfno.: 91 764 21 00 Fax.: 91 764 21 32Email: [email protected] Web: www.guemisa.com