Liquihard presentation

transcript

Liqui- Hard

Presented By- Bibhawesh Pandey

Nina Concrete Systems Pvt. Ltd

Contact- 09717246688

Concrete floors are not designed to take this continual abuse. Concrete floors are porous and tend to create dust

from wear and abuse.They are also subject to abrasion and chemical attack.It is for this reason that all concrete needs some sort of

protection regardless of where it's located.The problem, in the overall picture, is to determine what type of

protective material to choose for the various conditions.

Problems in floor?

Kotah - advantages

1. Good strength & durability characteristics.

2. Can be polished to produce high gloss & make dust proof.

3. Alternate to vacuum dewatered (tremix) floor.

Kotah - disadvantages

1. Since kotah stone is a naturally available material, its easy

availability in all areas of the country is not assured.

2. Multiple joints between adjacent stones increases the risk of

contamination

& lowers surface hygiene qualities.

3. Requires skilled labour for installation.

4. Very costly to install & time consuming.

Epoxy - advantages

1. Provides good aesthetic qualities & colour options.

2. High gloss & light reflectivity.

3. Good sealing qualities & dust-proofing qualities.

4. Resistance to chemicals depending upon type of resin &

system applied.

5. Abrasion resistance can be improved by opting for thicker epoxy

screeds which however, could be very costly.

Epoxy - disadvantages

1. LIMITED LIFE Maintenance free life of between 1 to 8 years only depending

upon usage characteristics.

2. Loses aesthetic qualities over time.

3. Gets easily scratched.

4. Requires repairs & recoating frequently to maintain performance &

aesthetics which involves heavy costs & interruption to production.

5. Cannot be used for external areas due to low U. V. stability.

6. Application procedures require careful surface preparations & skill to ensure

proper adhesion & performance.

7. Cannot be applied over fresh concrete & application must be taken after only

28 days which delays project completion.

Epoxy - failure

Phase ISingle or multiple

bubbles with diameters of between 0.5 cm and 4cm in the coating with a hard,

curved, closed surface.

Phase IICracked or worn

bubbles which smell unpleasant inside,

partial detachment of the flooring from the

substrate.

Phase IIIVoids, extensive

delamination of the flooring from the

substrate.

One time floor treatment for the life of your concrete floor

Liqui-Hard

Application Method

Benefits Comparison

Warranty

Areas of Application

Photo Gallery

Product Comparison

Downloads Contact UsTechnical Specifications

About W. R. Meadows?W. R. Meadows, Inc. is dedicated to serving the high quality construction product/system needs of architects, engineers, contractors and building owners in both the public and private sectors of the building construction industry. Protecting concrete is our business.

Since 1926, our family owned and operated a company which has been serving these needs guided by one vision and one philosophy set forth by our founders. Today, eight decades later, they remain our core values.

W. R. Meadows' extensive line of premium grade, high performance products and systems are available worldwide through our authorized distributor network. By design, you'll find these systems hard at work in, on, around and under concrete.

W. R. Meadows has always been concerned about the environment. Nearly two decades ago, the Green Line® of environmentally responsible products/systems for concrete performance was introduced. We remain committed to producing environment friendly products and systems that meet or exceed the latest EPA standards and guidelines.

LIQUI-HARD is a proprietary formula that penetrates the pores of your concrete to produce a tough, durable, dust-free surface.

LIQUI-HARD outperforms other products on the market to provide you with a tough, hardened surface, without the need for costly reapplication. Most importantly, it is designed to be applied once to last the life of your building. Untreated or improperly treated concrete can be a liability for the life of your building.Making the right choices can be difficult.

About W. R. Meadows?

What is LIQUI-HARD?LIQUI-HARD is a concrete densifier and chemical hardener compound that is a ready-to-use, colourless liquid, consisting of reactive chemicals that deeply penetrate the surface of concrete.

LIQUI-HARD is specifically designed to produce hardened, dust-proofed and improved chemically resistant surfaces wherever it is applied. Through a chemical reaction process.

LIQUI-HARD penetrates through the concrete and chemically solidifies the components into a homogeneous concrete mass. Besides its densifying and hardening action, LIQUI-HARD solidifies the concrete, eliminating dusting, rotting, and pitting.

How does LIQUI-HARD work?

When used on a concrete surface, LIQUI-HARD penetrates progressively through the concrete and chemically converts the weak calcium hydroxide and calcium carbonate compounds in the concrete to form beneficial calcium silicate hydrate (CSH) producing a hard, dense, and sealed surface.

The process is basically a chemical reaction between the free lime or calcium hydroxide and LIQUI-HARD to chemically convert weak aspects into good ones, through a process of crystalline.

Benefits

Penetrates deeply into concrete to densify and harden surfaces to prevent entry of moisture and other foreign matter.

MOISTURE ATTACKING REINFORCING STEELUntreated results in

Benefits

Dustproof and improves chemical, petroleum and abrasion resistance of treated surfaces.

UNSIGHTLY STAINS / SLIPPERYUntreated results in

Benefits

Permanent attractive sheen with the ability to polish.

UNSIGHTLY STAINS / SLIPPERYUntreated results in

Benefits

Protects against scratching or peeling.

MICRO PITTINGUntreated results in

Benefits

Provides tough, protected surface that won’tafter-yellow, discoloror show pedestrian marks and shall reduce vehicular traffic wear marks.

DUSTING / DULL ABRADED FLOORUntreated results in

Benefits

Improves light reflectance by producing a smoother concrete surface.

Comparison

No solid history.Durability

characteristics

History

Epoxy Kotah

Over 40 years of solid performance,places treated that are

still in existence.

LIQUI-HARD

Comparison

No hardening ofthe floor.

Good Strength

Hardening

Epoxy Kotah

Increases hardening of normal floor.

LIQUI-HARD

Comparison

100% sealing but life is short in comparison.

Multiple joints between adjacent stones

Sealing

Epoxy Kotah

100% sealing for long life

LIQUI-HARD

Comparison

Does not cure the floor. Needs full time

curing before application.

Does not require curing. Extra time

require before application

Curing

Epoxy Kotah

It cures the surface.No time required for application.

LIQUI-HARD

Comparison

Two or more. Single.

Number of application

Epoxy Kotah

Single

LIQUI-HARD

Comparison

No Warranty for lifetime.

Warranted for lifelong

Warranty

Epoxy Kotah

Warranted product.

LIQUI-HARD

Comparison

Requires re-coat,time to time.

Virtually eliminates thecost of maintenance,no costly re-coating

required.

Maintenance

Epoxy Kotah

Virtually eliminates thecost of maintenance,

no costly re-coating required.

LIQUI-HARD

Comparison

Deteriorates with abrasion of the floor.

Improves abrasionresistance.

Abrasion

Epoxy Kotah

Improves abrasion resistanceby 50%.

LIQUI-HARD

Comparison

Very expensive compared on

long-term performance.

Very costly to install & time consuming.

Prices

Epoxy Kotah

Very economical comparedon short & long term performance.

LIQUI-HARD

Comparison

Flakes off due to moisture coming from

surface whereby creating bubbles in it.

Does not allow moisture to pass through & other related problems such as flaking do not exist

since it is a natural stone.

Breathability

Epoxy KotahDoes not allow moisture to pass

through, flaking off problems do not exist as it is an integral part of

concrete.

LIQUI-HARD

Comparison

Deteriorates with age. Deteriorates with age.

Ageing

Epoxy Kotah

Improves with age.

LIQUI-HARD

Comparison

Is slippery when wet. Is slippery when wet.

Slippage

Epoxy Kotah

Gives a non-slippery surface.

LIQUI-HARD

Comparison

Costly to repair.

Since kotah stone is a naturally available material, its easy

availability in all areasis not assured.

Repair

Epoxy Kotah

Over 40 years of solid performance,places treated that are

still in existence. Thus dramatically reducing cost of maintenance.

LIQUI-HARD

Comparison

Initial high gloss which deteriorates with age.

Can be polished to produce high gloss & to make dust proof

Light Reflectivity

Epoxy Kotah

Improves with ageand opening to traffic.

LIQUI-HARD

Comparison

U. V. unstable U. V. stable

U. V. Stability

Epoxy Kotah

U. V. stable

LIQUI-HARD

Product Comparison

Industrial Application

Industrial Plants

Warehouses

Industrial Plants

Warehouses

Sewage Plants

Industrial Plants

Warehouses

Sewage Plants

Refineries

Industrial Plants

Warehouses

Sewage PlantsRefineries

Automotive Facilities

Industrial Plants

Warehouses

Chemical Processing Facilities

Industrial Plants

Warehouses

Chemical Processing Facilities

Heavy Engineering

Industrial PlantsWarehouses

Sewage Plants

Refineries

Automotive FacilitiesChemical Processing Facilities

Heavy Engineering

Common ApplicationHeavy Pedestrian Floor Traffic

Heavy Pedestrian Floor Traffic Areas

Common ApplicationCivic, Sports Arenas, Stadiums

Heavy Pedestrian FloorTraffic Areas

Civic, Sports Arenas, Stadiums

Common ApplicationAirport and Aircraft Hangars

Airports and Aircraft Hangars

Common ApplicationFood Processing Facilities

Food Processing Facilities

Common ApplicationHospitals

Food Processing FacilitiesHospitals

Common ApplicationParking Facilities

Food Processing FacilitiesHospitals

Parking Facilities

WarrantyW.R. Meadows inc. warrants that the concrete surface which has been treated with LIQUI-HARD, and after specified hardening and sealing time will stay hardened, water repellant, abrasion resistant, and dustproof for the period of 10 years.

In any situation if and when the treated surface will fail the above described conditions W.R. Meadows inc. will supply the necessary amount of LIQUI-HARD at their own expense to retreat any such faulty area.

The product warranty is only applicable when LIQUI-HARD is used on the structurally and correctly designed and prepared concrete surfaces. The warranty is invalid if concrete is not structurally sound but not limited to inappropriate design, cracking, defective workmanship, and failure of other concrete components than LIQUI-HARD.

Technical Specifications

1. Providing and applying LIQUI–HARD ready to use,liquid applied concrete densifier & chemical hardener compound, to cure, harden, dust proof and seal the concrete.

2. LIQUI–HARD is a colorless liquid, consisting of active chemicals that deeply penetrate the surface of concrete.

3. LIQUI–HARD is applied at a dosage rate of between100ml - 250ml per Sq. Mtr.(i.e., coverage rate of 5.00 to 8.00 Sq.Mtr per Litre).

4. LIQUI–HARD is specifically designed to also enhance the chemical resistance of treated surfaces.

Technical Specifications

5. Through a chemical reaction process, LIQUI – HARD penetrates progressively through the concrete and chemically solidifies all the component parts in to a homogenous concrete mass.

6. LIQUI – HARD also meets maximum VOC content limits of 400 g/L for concrete protective coatings as required by the U.S. EPA Architectural coatings Rule, with actual V.O.C content being less than 100 g/L.

Application Method

Application Movie

Original Surface

Application Video

Floor CleaningSurface should be clean and

structurally sound. Remove all residues, curing compounds, oils, sealers, contaminants and laitance

before applying LIQUI-HARD.

Application Movie

Floor ready forLIQUI-HARDapplication.

Application Movie

Spraying LIQUI-HARDApply undiluted LIQUI-HARD by

using a low-pressure sprayer or by spreading evenly witha soft-bristled broom.

Application Movie

SpreadingSpread evenly with a soft-bristled

broom.

Application Movie

Floor ScrubbingScrub the surface with mechanical scrubber to increase the penetration of LIQUI-HARD.

Application Movie

Liquid Penetrationby

Mechanical Scrubber

Application Movie

Gel FormationContinuing to work the LIQUI-HARD into the surface until the LIQUI-HARD forms a

gel formation and becomes slippery

Application Movie

Water SprinklingOnce the surface begins to gel and become slippery, immediately spray the surface with

a light water mist.

Application Movie

Floor WashingFlush the surface with water. During the

flushing process, agitate the surface with a broom to aid in the removal of the excess

LIQUI-HARD. .

Application Movie

Floor DryingRemove all excess material with a mop or

squeegee. Thoroughly squeegee the surface dry.

Application Movie

ShineAfter complete concrete hydration

(approximately 30 days) a propane burnisher may be used to polish

a LIQUI-HARD treated floor

Application Movie

PolishingAfter complete concrete hydration (approximately 30 days) a propane burnisher may be used to polish aLIQUI-HARD treated floor.

Propane burnisher must have a minimum recommended RPM level of 2000 RPM but not exceeding 3200 RPM.

A Minuteman M220028K17 with a 28-inch pad and 17 HP motor or equal is recommended.

Using a ‘black’ stripping pad, make multiple passes using a side-to-side motion. Always keep machine moving until desired level of polish is achieved.

Treated floors

PolishingFor a higher level of polish you may follow step 3, in the same manner, using a ‘red’ stripping pad until desired results are achieved.

In addition to burnishing, use a normal cleaning regimen, preferably using mechanical means, with a high PH detergent cleaner, a minimum of 1 time per week to increase polish development and seal.

Treated floors

Application Method

DownloadsLIQUI-HARD BrochureLIQUI-HARD Comparative Analysis

LIQUI-HARD Tests

LIQUI-HARD USFDA Standards

LIQUI-HARD Chemical Resistance Guide

LIQUI-HARD Data sheets

LIQUI-HARD Material safety

LIQUI-HARD Static Coefficient & Friction

LIQUI-HARD Compared with Epoxy

LIQUI-HARD Technical Specifications

Bangalore Office :Nina Concrete Systems Pvt. Ltd.,No. 40, 1st Floor,Next to Shrinivasa Residency,Shanta Kumar Circle,Kodihalli Main Road,Bangalore - 560 008.Tel.: 080 - 4115 9264,Telefax : 080 - 4115 9263e-mail : ninaind_bangalore@airtelbroadband.in

Pune Office :Nina Concrete Systems Pvt. Ltd.,Sukhwani Fortunes, Off. No. 2,1st Floor, Pimpri Civil Court Road,Pimpri, Pune - 411 018Tel.: 020 - 6533 1979e-mail: pune.ro@ninaindia.com

Hyderabad Office:Nina Concrete Systems Pvt. Ltd.,C/o. E. Yadaiah, House No. 1-9/1,Near Varavi ENT Institute,Madhapur Main Road,Hyderabad - 500 081

Registered and Corporate OfficeMani Bhuvan, 4th Floor,54, Hughes Road, Chowpatty,Mumbai - 400 007Tel.: +91 22 6616 6000Fax: +91 22 2369 1894e-mail : info-support@ninaindia.com

www.ninaindia.in

Technical Sales Office:Vardhman Complex PremisesCo-op. Hsg. Society Ltd., Office No. B-121,Plot # 10, Fitwell House Compound, L.B.S. Marg, Vikhroli (West), Mumbai – 400 083Tel.: +91 22 6716 6000Fax: +91 22 6716 6001

Liquihard presentation

Documents