Date post: | 14-Apr-2017 |
Category: |
Engineering |
Upload: | claudia-gamba |
View: | 128 times |
Download: | 1 times |
Pag.1
Company Profile
EN ISO 9001:2008 Accredited
General Company information
Registered Office:: Via Pontina km 78,750 ‐ B.go San Michele – 04100 ‐ LATINA ‐ ITALY
Headquarters: Via Migliara 46, n°20 ‐ B.go San Donato – 04010 LATINA ‐ ITALY
Secondary office: Via Galileo Ferraris 21/c ‐ 13048 Santhià (VC) ‐ ITALY
Internet website/email: www.geserind.it [email protected]
Share Capital:
Tax code and VAT no.: 02079660599
Chamber of Commerce reg. no.: n° 143977, Latina on 21‐01‐2002
Geographical areas of activities: National and international territories
Type of company: Technical/Commercial structure for industrial services management
Director: Mr. Giorgio Di Marco
Technical department manager: Eng. Claudia Gamba
Email: [email protected]
Mobile: +39.333 1002115
Project & Energy Manager: Eng. Raffaello Giacopetti
Email: [email protected]
Mobile: 347 9203499
H&S Manager: Eng. Daniele Baccini
Quality System Manager: Ms. Gabriella Panella
Certifications: EN ISO 9001:2008
Bank references: Monte dei Paschi di Siena ‐ Filiale di Via Cavour – Pontinia (LT)
€ 10.000,00
Contacts:
Who we are
‐ Installation and maintenance of electrical systems, access control, CCTV and laboratory
equipment, etc.
‐ Installation, balancing, validation and mantainance of HVAC systems.
‐ Energy services
‐ Design and Project Management
‐ Turn‐key delivery projects
‐ Qualifications, validations, biodecontaminations, calibrations
‐ Development and management of BMS
In the last ten years Ge.Ser.Ind. cooperated with the most important pharmaceutical companies and
acquired a relevant knowledge of this type of industry. Specifically, we developed experience in the
following sectors:
Ge.Ser.Ind. S.r.l. has highly qualified personnel, able to operate in the technical and scientific sectors
of national and International industry, according to regulation and guidelines from national and
international organizations.
Main aim of our Company is offering a service able to properly satisfy different needs in the various
industrial sectors, such as: Pharmaceutical, Chemical, Petrochemical, Food industries, Energy,
research.
Our competence and careful respect of procedures and reference laws allow us to be a reliable
partner achieving high standard levels.
Ge.Ser.Ind. owns a concrete expertise in the energy management field, providing services of
assistance and energy control on consumption and costs, collaborating with European partners in the
auditing and consultancy activities to our clients.
The company acquired specific skills in the industry field and can provide services in different
Engineering sectors, both directly and through the partnership with preexisting structures.
Our Company, thanks to the efforts of highly qualified personnel, the application of the most recent
"Best Practices" in the industry and the most efficient techniques and instrumentation, can meet our
clients' needs in a timely and effective way.
Maintenance and installation of :
– Electro‐instrumental systems for Scientific Research, Animal rooms, industrial and terziary fields
– Access Control
– CCTV
Laboratory equipment
– Assistance and maintenance of a wide range of scientific equipment , such as:
- Bio-hazard hoods and fume hoods
- Autoclaves- Sterilizers- Incubators- Pass -boxes- Ventilated cage racks- Etc ..
Installation and maintenance of Electrical systems, Access control, CCTV, lab equipment, etc.
Our technical staff is trained to use MAXIMO, a maintenance management system. This makes it possible to
work for a continuous improvement in operating efficiency of the equipment and tools through the
implementation of activities of predictive and preventive maintenance .
Installation, balancing, commissioning and maintenance of HVAC systems
•Installazione
• Balancing
•System commissioning and recommissioning
– Filters replacement
– Battery cleaning
– Cleaning and sanitization of AHUs and aerodynamic ducts
– Electrical, mechanical and instrumental checks
– Calibration and control instrumentation certification
– Measurement and balancing of airflows on aerodynamic components in the
troughs and the air handling units.
– Check the environmental parameters in classified environments.
‐ Test of integrity of HEPA high efficiency filters.
‐ Check the air cleanliness class in classified environments.
• Maintenance of Systems
‐ Dimensional check of the distribution supply and return air.
– Commissioning of systems and machinery for the verification of their optimal
operation after installation.
– Training and information of maintenance personnel on the proper use of the
systems.
– Extended check on existing systems to make sure all components are working
properly
– Balancing of systems to meet the actual demand and to optimize the operating
costs.
‐ Instrumentation and control system for the management of the units and
systems, adjusting the flow rate and environmental parameters ( pressure ,
temperature and humidity)
‐ Installation of HVAC systems, including ducts, insulations, coils, control valves
groups, air filtration systems for Pharmaceutical , Research, Animal facilities,
Industrial and tertiary sectors.
Energy management
•Certified Energy Managers
– Certifications EGE (Esperti in Gestione dell'Energia, according to UNI CEI 11339:2009 ) by TÜV and
certifications CEM (Certified Energy Managers) by AEE (Association of Energy Engineers)
•Energy audits
– Conduct audits identifying opportunities for energy savings and efficiency improvement
•Best Practices and innovative technologies
– Relying on our experience of working with global organizations, we can
indicate possibilities for improvement through the application of "best practices" and, depending
on the investment capacity of the customer, recommending the introduction of innovative
technologies to reduce energy consumption
• Alternative Energy
– Design, installation and start‐up of renewable energy systems.
It collaborates with European partners in the auditing and consultancy activities and helps clients use
their resources in the best way, trying to optimize them and avoiding possible wastes.
Our task is to support customers through constant commitment to a substantial reduction in energy
costs by monitoring and optimizing energy consumption .
Through the analysis of the client's characteristics, consumption and related energy costs, we detect a
strategy that will lead to greater awareness and consequent energy savings.
Ge.Ser.Ind. owns a concrete expertise in the energy management field, providing services of assistance
and energy control on consumption and costs.
Ge.Ser.Ind . belongs to the network "EcoXpert Schneider Electric ", having taken and passed successfully
the courses for the realization of Energy Efficiency solutions.
Design and Project Management
• Construction and Renovation Projects
‐ Basic and detail design
• Civil work
• Utilities Design
‐ HVAC
‐ Piping
‐ P & ID
• Furniture and fittings
‐ Planning of space
‐ Bill of quantities and Tendering
‐ Monitoring performance of work
• Integrated planning of activities
• Change Control in the execution phase
‐ CAD and documentation control
• Development of SOPs (Standard Operating Procedures)
Turn‐key projects
Ge.Ser.Ind. has had various experiences as a "general contractor" working for years with companies in "turn‐key"
projects.
From the construction of new buildings to the renovation of finishings, whether it's production areas, warehouses,
laboratories, animal units or offices, a specialized team of engineers and technicians will be able to offer a range of
design solutions capable of responding to all needs.
We take care of the project from A to Z and provide to the customer the guarantee of a single source for a satisfactory
end product.
Ge.Ser.Ind. has the skills necessary to carry out careful integration of the various phases of the project, ensuring at all
times full control and full customer satisfaction in terms of quality, time and cost. Being able to provide all services and
dealing directly with their management, the company can mitigate the interference between the various activities and
professionalism and to ensure, as the one responsible for the quality, budget and program of work, with particular
attention to matters relating to security.
Qualification and validations
‐ Containment Test in accordance with EN 14175
‐ Alarm test
• Additional Test
‐ Pressure Drop Test
‐ Alarm system test
‐ Sound pressure measurement
‐ Lighting level measurement
• Clean rooms and LAF (Ref. UNI EN ISO 14644 / EU GMP Annex 1)
‐ Check the speed and air flow coming out of the high efficiency filters (HEPA)
‐ Check the pressure drop of high efficiency filters (HEPA)
‐ Verification of laminar air flow
‐ Test to verify the integrity of high efficiency filters (HEPA)
‐ Classification of airborne molecular contamination
‐ Test of microbiological contamination.
• Fume Hoods (Ref.: UNI EN ISO 14644 / EU GMP Annex 1)
‐ Test of the air velocity in the installation of the fume cupboard according to EN 14175
‐ Test of the front speed according to EN 14175
‐ Visualization of air flows
• Biological hoods (Ref.: UNI EN ISO 14644 / UNI EN 12469 / NSF 49)
‐ Verification test of the air speed on the inlet section , the extracted flow, the speed of the air in the outlet
from the final filter and relative differential pressure, laminar flows , the integrity of B10high efficiency
filters ( HEPA)
‐ Classification of airborne molecular contamination
Bio‐decontamination
Calibrations
Our Company, through the use of sample instrumentation, equipped with certification SIT or
equivalent, is able to perform the calibration of electronic and pneumatic instrumentation for:
‐ Pressure
‐ Temperature
‐ Humidity
‐ Speed
‐ Capacity
‐ Level
‐ Electrical measures
We are also able to perform:
‐ Calibration for process instrumentation in the chemical and pharmaceutical industry
‐ Thermal Mapping of ovens, autoclaves, thermostated rooms and cabins, dryers, crystallizers
‐ IQ, OQ and PQ protocols
The Bio‐Decontamination consists of a chemical‐physical process that leads to the elimination of all
microbial living beings, whether pathogenic or not, including spores and fungi . Through the use of specific
equipment and qualified personnel , our company is able to perform services of Bio‐Decontamination of
entire premises and specific equipment such as, for instalce , biological hoods , incubators , ventilated
stations, robotic systems , etc.
Building Management System
•TAC /Schneider/Siemens
– Specialized knowledge of all aspects of this BMS;
•System architecture
•Programming
•Final reports
•Installation of meters on utilities
•System integration
– Use of external systems of Bacnet and Modbus programming for the integration with the central
BMS system.
•HVAC systems controls (Phoenix Controls/Daikin/Mitsubishi)
•Installation and maintenance